[RESEND PATCH v1 2/4] riscv: dts: t-head: Add basic device tree for Sipeed Lichee PI 4A board
Yixun Lan
dlan at gentoo.org
Fri May 26 14:41:05 CEST 2023
Only add basic support for CPU, PLIC UART and Timer.
Reviewed-by: Wei Fu <wefu at redhat.com>
Signed-off-by: Yixun Lan <dlan at gentoo.org>
---
arch/riscv/dts/Makefile | 1 +
arch/riscv/dts/th1520-lichee-module-4a.dtsi | 34 ++
arch/riscv/dts/th1520-lichee-pi-4a.dts | 32 ++
arch/riscv/dts/th1520.dtsi | 435 ++++++++++++++++++++
4 files changed, 502 insertions(+)
create mode 100644 arch/riscv/dts/th1520-lichee-module-4a.dtsi
create mode 100644 arch/riscv/dts/th1520-lichee-pi-4a.dts
create mode 100644 arch/riscv/dts/th1520.dtsi
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
index 79a58694f5..72fd815a40 100644
--- a/arch/riscv/dts/Makefile
+++ b/arch/riscv/dts/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb
dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive-visionfive-2-v1.3b.dtb
dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive-visionfive-2-v1.2a.dtb
+dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb
include $(srctree)/scripts/Makefile.dts
targets += $(dtb-y)
diff --git a/arch/riscv/dts/th1520-lichee-module-4a.dtsi b/arch/riscv/dts/th1520-lichee-module-4a.dtsi
new file mode 100644
index 0000000000..dc00e3dfa0
--- /dev/null
+++ b/arch/riscv/dts/th1520-lichee-module-4a.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
+ */
+
+/dts-v1/;
+
+#include "th1520.dtsi"
+
+/ {
+ model = "Sipeed Lichee Module 4A";
+ compatible = "sipeed,lichee-module-4a", "thead,th1520";
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x2 0x00000000>;
+ };
+};
+
+&osc {
+ clock-frequency = <24000000>;
+};
+
+&osc_32k {
+ clock-frequency = <32768>;
+};
+
+&apb_clk {
+ clock-frequency = <62500000>;
+};
+
+&uart_sclk {
+ clock-frequency = <100000000>;
+};
diff --git a/arch/riscv/dts/th1520-lichee-pi-4a.dts b/arch/riscv/dts/th1520-lichee-pi-4a.dts
new file mode 100644
index 0000000000..a1248b2ee3
--- /dev/null
+++ b/arch/riscv/dts/th1520-lichee-pi-4a.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
+ */
+
+#include "th1520-lichee-module-4a.dtsi"
+
+/ {
+ model = "Sipeed Lichee Pi 4A";
+ compatible = "sipeed,lichee-pi-4a", "sipeed,lichee-module-4a", "thead,th1520";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/riscv/dts/th1520.dtsi b/arch/riscv/dts/th1520.dtsi
new file mode 100644
index 0000000000..f62a62da6e
--- /dev/null
+++ b/arch/riscv/dts/th1520.dtsi
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Alibaba Group Holding Limited.
+ * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "thead,th1520";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <3000000>;
+
+ c910_0: cpu at 0 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <0>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_1: cpu at 1 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <1>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_2: cpu at 2 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <2>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_3: cpu at 3 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <3>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&c910_0>;
+ };
+
+ core1 {
+ cpu = <&c910_1>;
+ };
+
+ core2 {
+ cpu = <&c910_2>;
+ };
+
+ core3 {
+ cpu = <&c910_3>;
+ };
+ };
+ };
+
+ l2_cache: l2-cache {
+ compatible = "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-size = <1048576>;
+ cache-sets = <1024>;
+ cache-unified;
+ };
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_24m";
+ #clock-cells = <0>;
+ };
+
+ osc_32k: 32k-oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_32k";
+ #clock-cells = <0>;
+ };
+
+ apb_clk: apb-clk-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "apb_clk";
+ #clock-cells = <0>;
+ };
+
+ uart_sclk: uart-sclk-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "uart_sclk";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ cpurst: cpurst {
+ compatible = "thead,reset-th1520";
+ entry-reg = <0xff 0xff019050>;
+ entry-cnt = <4>;
+ control-reg = <0xff 0xff015004>;
+ control-val = <0x1c>;
+ csr-copy = <0x7f3 0x7c0 0x7c1 0x7c2 0x7c3 0x7c5 0x7cc>;
+ };
+
+ plic: interrupt-controller at ffd8000000 {
+ compatible = "thead,th1520-plic", "thead,c900-plic";
+ reg = <0xff 0xd8000000 0x0 0x01000000>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ riscv,ndev = <240>;
+ };
+
+ clint: timer at ffdc000000 {
+ compatible = "thead,th1520-clint", "thead,c900-clint";
+ reg = <0xff 0xdc000000 0x0 0x00010000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>;
+ };
+
+ uart0: serial at ffe7014000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7014000 0x0 0x4000>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial at ffe7f00000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7f00000 0x0 0x4000>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial at ffe7f04000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7f04000 0x0 0x4000>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ gpio2: gpio at ffe7f34000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xe7f34000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-controller at 0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio3: gpio at ffe7f38000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xe7f38000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-controller at 0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio0: gpio at ffec005000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xec005000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-controller at 0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio at ffec006000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xec006000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-controller at 0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ uart2: serial at ffec010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xec010000 0x0 0x4000>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ timer0: timer at ffefc32000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32000 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer1: timer at ffefc32014 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32014 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer2: timer at ffefc32028 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32028 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer3: timer at ffefc3203c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc3203c 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart4: serial at fff7f08000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xf7f08000 0x0 0x4000>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart5: serial at fff7f0c000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xf7f0c000 0x0 0x4000>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ timer4: timer at ffffc33000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33000 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer5: timer at ffffc33014 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33014 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer6: timer at ffffc33028 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33028 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer7: timer at ffffc3303c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc3303c 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ao_gpio0: gpio at fffff41000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xfff41000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-controller at 0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ ao_gpio1: gpio at fffff52000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xfff52000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-controller at 0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
--
2.40.0
More information about the U-Boot
mailing list