[PATCH 3/5] imx: imx8mn-beacon: Move environment definition to env file
Adam Ford
aford173 at gmail.com
Sun May 28 21:18:02 CEST 2023
Instead of cluttering up a header file with a bunch of defines,
move the default environmental variables to a file called
imx8mn_beacon.env and reference it from the defconfigs.
Signed-off-by: Adam Ford <aford173 at gmail.com>
---
board/beacon/imx8mn/imx8mn_beacon.env | 25 +++++++++++
configs/imx8mn_beacon_2g_defconfig | 1 +
configs/imx8mn_beacon_defconfig | 1 +
configs/imx8mn_beacon_fspi_defconfig | 1 +
include/configs/imx8mn_beacon.h | 61 ---------------------------
5 files changed, 28 insertions(+), 61 deletions(-)
create mode 100644 board/beacon/imx8mn/imx8mn_beacon.env
diff --git a/board/beacon/imx8mn/imx8mn_beacon.env b/board/beacon/imx8mn/imx8mn_beacon.env
new file mode 100644
index 0000000000..ca90053d47
--- /dev/null
+++ b/board/beacon/imx8mn/imx8mn_beacon.env
@@ -0,0 +1,25 @@
+boot_fdt=try
+bootdelay=2
+bootscript=echo Running bootscript from mmc ...; source
+console=ttymxc1
+fdt_addr=0x45000000
+fdt_file=imx8mn-beacon-kit.dtb
+finduuid=part uuid mmc ${mmcdev}:2 uuid
+image=Image
+initrd_addr=0x46000000
+loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};
+loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}
+loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
+loadramdisk=load mmc ${mmcdev} ${ramdisk_addr} ${ramdiskimage}
+mmcargs=setenv bootargs console=${console},${baudrate} root=PARTUUID=${uuid} rootwait rw ${mtdparts} ${optargs}
+mmcautodetect=yes
+mmcboot=echo Booting from mmc ...; run finduuid; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then booti ${loadaddr} - ${fdt_addr}; else echo WARN: Cannot load the DT; fi; else echo wait for boot; fi;
+mmcdev=1
+mmcpart=1
+netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
+netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${loadaddr} ${image}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then booti ${loadaddr} - ${fdt_addr}; else echo WARN: Cannot load the DT; fi; else booti; fi;
+ramargs=setenv bootargs console=${console},${baudrate} root=/dev/ram rw ${optargs}
+ramboot=echo Booting from RAMdisk...; run loadimage; run loadfdt; fdt addr $fdt_addr; run loadramdisk; run ramargs; booti ${loadaddr} ${ramdisk_addr} ${fdt_addr} ${optargs}
+ramdisk_addr=0x46000000
+ramdiskimage=rootfs.cpio.uboot
+script=boot.scr
diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig
index c87cdd6516..8f8194adf7 100644
--- a/configs/imx8mn_beacon_2g_defconfig
+++ b/configs/imx8mn_beacon_2g_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SOURCE_FILE="imx8mn_beacon"
CONFIG_NR_DRAM_BANKS=1
CONFIG_SF_DEFAULT_SPEED=40000000
CONFIG_ENV_SIZE=0x2000
diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig
index d68c1207cd..098c9a86e3 100644
--- a/configs/imx8mn_beacon_defconfig
+++ b/configs/imx8mn_beacon_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SOURCE_FILE="imx8mn_beacon"
CONFIG_NR_DRAM_BANKS=1
CONFIG_SF_DEFAULT_SPEED=40000000
CONFIG_ENV_SIZE=0x2000
diff --git a/configs/imx8mn_beacon_fspi_defconfig b/configs/imx8mn_beacon_fspi_defconfig
index ecd383a896..5335fe73a6 100644
--- a/configs/imx8mn_beacon_fspi_defconfig
+++ b/configs/imx8mn_beacon_fspi_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SOURCE_FILE="imx8mn_beacon"
CONFIG_NR_DRAM_BANKS=1
CONFIG_SF_DEFAULT_SPEED=40000000
CONFIG_ENV_SIZE=0x2000
diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h
index 1880d0311e..699e209044 100644
--- a/include/configs/imx8mn_beacon.h
+++ b/include/configs/imx8mn_beacon.h
@@ -12,67 +12,6 @@
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-/* Initial environment variables */
-#define CFG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=Image\0" \
- "ramdiskimage=rootfs.cpio.uboot\0" \
- "console=ttymxc1,115200\0" \
- "fdt_addr=0x43000000\0" \
- "ramdisk_addr=0x44000000\0" \
- "boot_fdt=try\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "initrd_addr=0x43800000\0" \
- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- "mmcpart=1\0" \
- "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console} " \
- " root=PARTUUID=${uuid} rootwait rw ${mtdparts} ${optargs}\0" \
- "ramargs=setenv bootargs console=${console} root=/dev/ram rw " \
- " ${optargs}\0" \
- "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "loadramdisk=load mmc ${mmcdev} ${ramdisk_addr} ${ramdiskimage}\0"\
- "mmcboot=echo Booting from mmc ...; " \
- "run finduuid; run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "booti ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "else " \
- "echo wait for boot; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${loadaddr} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "booti ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "else " \
- "booti; " \
- "fi;\0" \
- "ramboot=echo Booting from RAMdisk...; "\
- "run loadimage; run loadfdt; fdt addr $fdt_addr; "\
- "run loadramdisk; run ramargs; " \
- "booti ${loadaddr} ${ramdisk_addr} ${fdt_addr} ${optargs}\0"
-
/* Link Definitions */
#define CFG_SYS_INIT_RAM_ADDR 0x40000000
--
2.39.2
More information about the U-Boot
mailing list