[RESEND PATCH v1 1/4] riscv: t-head: licheepi4a: initial support added

[Yixun Lan]

Hi Bin:

On 09:12 Mon 29 May     , Bin Meng wrote:
> On Sat, May 27, 2023 at 9:41 PM Yixun Lan <dlan at gentoo.org> wrote:
> >
> > Hi Guo, Jisheng:
> >
> > On 11:36 Sat 27 May     , Guo Ren wrote:
> > > On Fri, May 26, 2023 at 8:41 PM Yixun Lan <dlan at gentoo.org> wrote:
> > > >
> > > > Add support for Sipeed's Lichee Pi 4A board which based on
> > > > T-HEAD's TH1520 SoC, only minimal device tree and serial onsole are enabled,
> > > > so it's capable of chain booting from T-HEAD's vendor u-boot.
> > > >
> > > > Reviewed-by: Wei Fu <wefu at redhat.com>
> > > > Signed-off-by: Yixun Lan <dlan at gentoo.org>
> > > > ---
> > > >  arch/riscv/Kconfig                   |  5 ++++
> > > >  board/thead/th1520_lpi4a/Kconfig     | 42 ++++++++++++++++++++++++++++
> > > >  board/thead/th1520_lpi4a/MAINTAINERS |  7 +++++
> > > >  board/thead/th1520_lpi4a/Makefile    |  5 ++++
> > > >  board/thead/th1520_lpi4a/board.c     | 14 ++++++++++
> > > >  include/configs/th1520_lpi4a.h       | 22 +++++++++++++++
> > > >  6 files changed, 95 insertions(+)
> > > >  create mode 100644 board/thead/th1520_lpi4a/Kconfig
> > > >  create mode 100644 board/thead/th1520_lpi4a/MAINTAINERS
> > > >  create mode 100644 board/thead/th1520_lpi4a/Makefile
> > > >  create mode 100644 board/thead/th1520_lpi4a/board.c
> > > >  create mode 100644 include/configs/th1520_lpi4a.h
> > > >
> > > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > > > index f6ed05906a..419b6171a9 100644
> > > > --- a/arch/riscv/Kconfig
> > > > +++ b/arch/riscv/Kconfig
> > > > @@ -27,6 +27,10 @@ config TARGET_SIFIVE_UNMATCHED
> > > >  config TARGET_STARFIVE_VISIONFIVE2
> > > >         bool "Support StarFive VisionFive2 Board"
> > > >
> > > > +config TARGET_TH1520_LPI4A
> > > > +       bool "Support Sipeed's TH1520 Lichee PI 4A Board"
> > > > +       select SYS_CACHE_SHIFT_6
> > > > +
> > > >  config TARGET_SIPEED_MAIX
> > > >         bool "Support Sipeed Maix Board"
> > > >         select SYS_CACHE_SHIFT_6
> > > > @@ -66,6 +70,7 @@ source "board/emulation/qemu-riscv/Kconfig"
> > > >  source "board/microchip/mpfs_icicle/Kconfig"
> > > >  source "board/sifive/unleashed/Kconfig"
> > > >  source "board/sifive/unmatched/Kconfig"
> > > > +source "board/thead/th1520_lpi4a/Kconfig"
> > > >  source "board/openpiton/riscv64/Kconfig"
> > > >  source "board/sipeed/maix/Kconfig"
> > > >  source "board/starfive/visionfive2/Kconfig"
> > > > diff --git a/board/thead/th1520_lpi4a/Kconfig b/board/thead/th1520_lpi4a/Kconfig
> > > > new file mode 100644
> > > > index 0000000000..622246127c
> > > > --- /dev/null
> > > > +++ b/board/thead/th1520_lpi4a/Kconfig
> > > > @@ -0,0 +1,42 @@
> > > > +if TARGET_TH1520_LPI4A
> > > > +
> > > > +config ARCH_THEAD
> > > > +       bool
> > > > +       default y
> > > > +
> > > > +config SYS_BOARD
> > > > +       default "th1520_lpi4a"
> > for the board, I'm not sure whether people will prefer to keep the 'th1520_' prefix,
> > otherwise we could make it shorter, leave only 'lpi4a'? thoughts?
> >
> > > > +
> > > > +config SYS_VENDOR
> > > > +       default "thread"
> >                     ~~~~~~~ notice, in my original patch, it's 'thead'
> > > default "T-HEAD"
> > No, here should be 'thead', since the CONFIG_SYS_VENDOR will form
> > board/${CONFIG_SYS_VENDOR}, please consult arch/Kconfig for reference.
> >
> > I personally would prefer 't-head' which probably cause less confusion..
> > but since kernel use 'thead'[1], so I just follow it to keep them aligned.
> >
> 
> But you have a typo here :)
do you mean 'thread'? It's 'thead' actually in my original patch, so no typo..
I was already trying to clarify this.

It's probably a grammar correction when Guo reply the email

https://lore.kernel.org/all/20230526124107.894-2-dlan@gentoo.org/
> 
> > [1] in kernel, the dts path consist of 'thead', e.g. arch/riscv/boot/dts/thead/
> >
> 
> Regards,
> Bin

-- 
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55