[PATCH 0/5] rockchip: rk3568: Use dwc3-generic driver

[Jonas Karlman]

This series add support for rk3568 in dwc3-generic driver and change to
use the dwc3-generic driver for rk3568 devices having usb enabled.

After these changes it should be possible to support usb gadget on
rk3568 with e.g.:

  # CONFIG_USB_FUNCTION_FASTBOOT is not set
  CONFIG_DM_USB_GADGET=y
  CONFIG_USB_GADGET=y

Patch 1 reverts addition of now unnecessary regulator-boot-on props.
Patch 2 improve support for childless glue/ctrl dt node.
Patch 3 relax a hard error when usb gadget support is not enabled.
Patch 4 add support for the glue/ctrl dt node used by rk3568.
Patch 5 change rk3568 devices to use dwc3-generic driver.

This series is also available at [1]

[1] https://github.com/Kwiboo/u-boot-rockchip/commits/rk3568-dwc3-generic-v1

Jonas Karlman (5):
  Revert "arm: dts: rockchip: radxa-cm3-io, rock-3a: enable regulators
    for usb"
  usb: dwc3-generic: Return early when there is no child node
  usb: dwc3-generic: Relax unsupported dr_mode check
  usb: dwc3-generic: Add rk3568 support
  rockchip: rk3568: Use dwc3-generic driver

 arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi |  4 ---
 arch/arm/dts/rk3568-rock-3a-u-boot.dtsi      |  8 ------
 configs/radxa-cm3-io-rk3566_defconfig        |  2 +-
 configs/rock-3a-rk3568_defconfig             |  2 +-
 drivers/usb/dwc3/dwc3-generic.c              | 27 ++++++++++++++++----
 5 files changed, 24 insertions(+), 19 deletions(-)

-- 
2.40.1