[PATCH 04/14] net: ethoc: Switch to new U-Boot PHY API

[Marek Vasut]

Use new U-Boot phy_connect() API which also supports fixed PHYs.

Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Geert Uytterhoeven <geert+renesas at glider.be>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Michal Simek <michal.simek at amd.com>
Cc: Nishanth Menon <nm at ti.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
---
 drivers/net/ethoc.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index 29067e9e949..13fad8119bb 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -608,18 +608,16 @@ static int ethoc_mdio_init(const char *name, struct ethoc *priv)
 static int ethoc_phy_init(struct ethoc *priv, void *dev)
 {
 	struct phy_device *phydev;
-	int mask = 0xffffffff;
+	int mask = -1;
 
 #ifdef CONFIG_PHY_ADDR
-	mask = 1 << CONFIG_PHY_ADDR;
+	mask = CONFIG_PHY_ADDR;
 #endif
 
-	phydev = phy_find_by_mask(priv->bus, mask);
+	phydev = phy_connect(priv->bus, mask, dev, PHY_INTERFACE_MODE_MII);
 	if (!phydev)
 		return -ENODEV;
 
-	phy_connect_dev(phydev, dev, PHY_INTERFACE_MODE_MII);
-
 	phydev->supported &= PHY_BASIC_FEATURES;
 	phydev->advertising = phydev->supported;
 
-- 
2.39.2