[PATCH 07/14] net: sunxi_emac: Switch to new U-Boot PHY API

[Marek Vasut]

Use new U-Boot phy_connect() API which also supports fixed PHYs.

Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Geert Uytterhoeven <geert+renesas at glider.be>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Michal Simek <michal.simek at amd.com>
Cc: Nishanth Menon <nm at ti.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
---
 drivers/net/sunxi_emac.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
index ad9e1abd161..4c90d4b4981 100644
--- a/drivers/net/sunxi_emac.c
+++ b/drivers/net/sunxi_emac.c
@@ -248,10 +248,10 @@ static int emac_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
 
 static int sunxi_emac_init_phy(struct emac_eth_dev *priv, void *dev)
 {
-	int ret, mask = 0xffffffff;
+	int ret, mask = -1;
 
 #ifdef CONFIG_PHY_ADDR
-	mask = 1 << CONFIG_PHY_ADDR;
+	mask = CONFIG_PHY_ADDR;
 #endif
 
 	priv->bus = mdio_alloc();
@@ -269,11 +269,10 @@ static int sunxi_emac_init_phy(struct emac_eth_dev *priv, void *dev)
 	if (ret)
 		return ret;
 
-	priv->phydev = phy_find_by_mask(priv->bus, mask);
+	priv->phydev = phy_connect(priv->bus, mask, dev, PHY_INTERFACE_MODE_MII);
 	if (!priv->phydev)
 		return -ENODEV;
 
-	phy_connect_dev(priv->phydev, dev, PHY_INTERFACE_MODE_MII);
 	phy_config(priv->phydev);
 
 	return 0;
-- 
2.39.2