[PATCH 11/14] net: ravb: Drop reset GPIO handling in favor of common code

Marek Vasut marek.vasut+renesas at mailbox.org
Wed May 31 00:51:28 CEST 2023


The common code is now capable of handling reset GPIO associated
with PHY. Drop the local ad-hoc code in favor of common code.

Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Geert Uytterhoeven <geert+renesas at glider.be>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Michal Simek <michal.simek at amd.com>
Cc: Nishanth Menon <nm at ti.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
---
 drivers/net/Kconfig |  1 +
 drivers/net/ravb.c  | 22 ----------------------
 2 files changed, 1 insertion(+), 22 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 09039a283eb..48f9efcc94f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -764,6 +764,7 @@ config RENESAS_RAVB
 	bool "Renesas Ethernet AVB MAC"
 	depends on RCAR_64
 	select PHYLIB
+	select PHY_ETHERNET_ID
 	help
 	  This driver implements support for the Ethernet AVB block in
 	  Renesas M3 and H3 SoCs.
diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c
index c74c8a81f94..0bcd6cfd3f3 100644
--- a/drivers/net/ravb.c
+++ b/drivers/net/ravb.c
@@ -131,7 +131,6 @@ struct ravb_priv {
 	struct mii_dev		*bus;
 	void __iomem		*iobase;
 	struct clk_bulk		clks;
-	struct gpio_desc	reset_gpio;
 };
 
 static inline void ravb_flush_dcache(u32 addr, u32 len)
@@ -312,13 +311,6 @@ static int ravb_phy_config(struct udevice *dev)
 	struct phy_device *phydev;
 	int reg;
 
-	if (dm_gpio_is_valid(&eth->reset_gpio)) {
-		dm_gpio_set_value(&eth->reset_gpio, 1);
-		mdelay(20);
-		dm_gpio_set_value(&eth->reset_gpio, 0);
-		mdelay(1);
-	}
-
 	phydev = phy_connect(eth->bus, -1, dev, pdata->phy_interface);
 	if (!phydev)
 		return -ENODEV;
@@ -503,7 +495,6 @@ static int ravb_probe(struct udevice *dev)
 {
 	struct eth_pdata *pdata = dev_get_plat(dev);
 	struct ravb_priv *eth = dev_get_priv(dev);
-	struct ofnode_phandle_args phandle_args;
 	struct mii_dev *mdiodev;
 	void __iomem *iobase;
 	int ret;
@@ -515,17 +506,6 @@ static int ravb_probe(struct udevice *dev)
 	if (ret < 0)
 		goto err_mdio_alloc;
 
-	ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, &phandle_args);
-	if (!ret) {
-		gpio_request_by_name_nodev(phandle_args.node, "reset-gpios", 0,
-					   &eth->reset_gpio, GPIOD_IS_OUT);
-	}
-
-	if (!dm_gpio_is_valid(&eth->reset_gpio)) {
-		gpio_request_by_name(dev, "reset-gpios", 0, &eth->reset_gpio,
-				     GPIOD_IS_OUT);
-	}
-
 	mdiodev = mdio_alloc();
 	if (!mdiodev) {
 		ret = -ENOMEM;
@@ -576,8 +556,6 @@ static int ravb_remove(struct udevice *dev)
 	free(eth->phydev);
 	mdio_unregister(eth->bus);
 	mdio_free(eth->bus);
-	if (dm_gpio_is_valid(&eth->reset_gpio))
-		dm_gpio_free(dev, &eth->reset_gpio);
 	unmap_physmem(eth->iobase, MAP_NOCACHE);
 
 	return 0;
-- 
2.39.2



More information about the U-Boot mailing list