[PATCH 13/14] net: sh_eth: Workaround cache issues

[Marek Vasut]

From: Valentine Barshak <valentine.barshak at cogentembedded.com>

U-Boot writes to RX packets when constructing replies.
This can cause stale cached data to be written to RX
buffer while we're receiving a packet. This causes RX
packet corruption because we invalidate the cache right
before processing the packet. Invalidate packet buffer
cache when preparing RX descriptor as well. This seems
to fix RX packet drops with high RX traffic.

While at it flush the descriptors right before enabling
RX/TX in sh_eth_tx_desc_init/sh_eth_rx_desc_init callbacks
when they are ready instead of flushing after allocation.

Signed-off-by: Valentine Barshak <valentine.barshak at cogentembedded.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Geert Uytterhoeven <geert+renesas at glider.be>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Michal Simek <michal.simek at amd.com>
Cc: Nishanth Menon <nm at ti.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
---
 drivers/net/sh_eth.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 95042daade0..7314caadfdc 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -142,6 +142,8 @@ static void sh_eth_recv_finish(struct sh_eth_dev *eth)
 {
 	struct sh_eth_info *port_info = &eth->port_info[eth->port];
 
+	invalidate_cache(ADDR_TO_P2(port_info->rx_desc_cur->rd2), MAX_BUF_SIZE);
+
 	/* Make current descriptor available again */
 	if (port_info->rx_desc_cur->rd0 & RD_RDLE)
 		port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
@@ -210,8 +212,6 @@ static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
 		goto err;
 	}
 
-	flush_cache_wback(port_info->tx_desc_alloc, alloc_desc_size);
-
 	/* Make sure we use a P2 address (non-cacheable) */
 	port_info->tx_desc_base =
 		(struct tx_desc_s *)ADDR_TO_P2((uintptr_t)port_info->tx_desc_alloc);
@@ -229,6 +229,7 @@ static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
 	cur_tx_desc--;
 	cur_tx_desc->td0 |= TD_TDLE;
 
+	flush_cache_wback(port_info->tx_desc_alloc, alloc_desc_size);
 	/*
 	 * Point the controller to the tx descriptor list. Must use physical
 	 * addresses
@@ -264,8 +265,6 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
 		goto err;
 	}
 
-	flush_cache_wback(port_info->rx_desc_alloc, alloc_desc_size);
-
 	/* Make sure we use a P2 address (non-cacheable) */
 	port_info->rx_desc_base =
 		(struct rx_desc_s *)ADDR_TO_P2((uintptr_t)port_info->rx_desc_alloc);
@@ -299,6 +298,9 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
 	cur_rx_desc--;
 	cur_rx_desc->rd0 |= RD_RDLE;
 
+	invalidate_cache(port_info->rx_buf_alloc, NUM_RX_DESC * MAX_BUF_SIZE);
+	flush_cache_wback(port_info->rx_desc_alloc, alloc_desc_size);
+
 	/* Point the controller to the rx descriptor list */
 	sh_eth_write(port_info, ADDR_TO_PHY(port_info->rx_desc_base), RDLAR);
 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
-- 
2.39.2