[PATCH 14/15] board: ti: Add j721e_beagleboneai64_* config fragments and env file

[Nishanth Menon]

Add defconfig fragments for J721E based BeagleBone AI-64 and
corresponding customized environment.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
 board/ti/j721e/beagleboneai64.env        | 19 ++++++++
 board/ti/j721e/beagleboneai64_a72.config | 55 ++++++++++++++++++++++++
 board/ti/j721e/beagleboneai64_r5.config  | 19 ++++++++
 3 files changed, 93 insertions(+)
 create mode 100644 board/ti/j721e/beagleboneai64.env
 create mode 100644 board/ti/j721e/beagleboneai64_a72.config
 create mode 100644 board/ti/j721e/beagleboneai64_r5.config

diff --git a/board/ti/j721e/beagleboneai64.env b/board/ti/j721e/beagleboneai64.env
new file mode 100644
index 000000000000..4f0a94a8113e
--- /dev/null
+++ b/board/ti/j721e/beagleboneai64.env
@@ -0,0 +1,19 @@
+#include <env/ti/ti_common.env>
+#include <env/ti/default_findfdt.env>
+#include <env/ti/mmc.env>
+
+name_kern=Image
+console=ttyS2,115200n8
+args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000
+run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+set_led_state_fail_load= led led-0 off; led led-1 on;
+	led led-2 off; led led-3 on; led led-4 off
+set_led_state_start_load=led led-0 on; led led-1 off;
+	led led-2 on; led led-3 off; led led-4 on
+boot=mmc
+mmcdev=1
+bootpart=1:1
+bootdir=/boot
+boot_targets=mmc1 mmc0 usb pxe
+bootmeths=script extlinux efi pxe
+rd_spec=-
diff --git a/board/ti/j721e/beagleboneai64_a72.config b/board/ti/j721e/beagleboneai64_a72.config
new file mode 100644
index 000000000000..926f725508e5
--- /dev/null
+++ b/board/ti/j721e/beagleboneai64_a72.config
@@ -0,0 +1,55 @@
+# Defconfig fragment to apply on top of j721e_evm_a72_defconfig
+
+CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-beagleboneai64"
+CONFIG_SPL_OF_LIST="k3-j721e-beagleboneai64"
+CONFIG_OF_LIST="k3-j721e-beagleboneai64"
+CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load"
+CONFIG_EXT4_WRITE=y
+CONFIG_LZO=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
+CONFIG_AUTOBOOT_DELAY_STR="d"
+CONFIG_AUTOBOOT_STOP_STR=" "
+
+# No Flash
+CONFIG_HBMC_AM654=n
+CONFIG_UFS=n
+
+# Sierra disabled for now till stability
+CONFIG_PHY_CADENCE_SIERRA=n
+CONFIG_PHY_J721E_WIZ=n
+# Torrent only for DP. no DP splash screen
+CONFIG_PHY_CADENCE_TORRENT=n
+
+# Use the Beaglebone-AI64 env file
+CONFIG_ENV_SOURCE_FILE="beagleboneai64"
+# No dependency on EEPROM detection
+CONFIG_TI_I2C_BOARD_DETECT=n
+# No board fixup to do
+CONFIG_OF_BOARD_SETUP=n
+
+# Do not use emmc boot - use FS only
+CONFIG_SUPPORT_EMMC_BOOT=n
+CONFIG_MMC_IO_VOLTAGE=y
+# CONFIG_SPL_MMC_IO_VOLTAGE is not set
+CONFIG_MMC_UHS_SUPPORT=y
+# CONFIG_SPL_MMC_UHS_SUPPORT is not set
+CONFIG_MMC_HS200_SUPPORT=y
+# CONFIG_SPL_MMC_HS200_SUPPORT is not set
+
+# Enable GPIO control
+CONFIG_DM_GPIO=y
+CONFIG_SPL_GPIO=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPIO_READ=y
+# Enable LEDs
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_SPL_LED=y
+CONFIG_SPL_LED_GPIO=y
+# Enable I2C bus
+CONFIG_SPL_I2C=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_CMD_I2C=y
diff --git a/board/ti/j721e/beagleboneai64_r5.config b/board/ti/j721e/beagleboneai64_r5.config
new file mode 100644
index 000000000000..cf124fb70cf1
--- /dev/null
+++ b/board/ti/j721e/beagleboneai64_r5.config
@@ -0,0 +1,19 @@
+# Defconfig fragment to apply on top of:
+# j721e_evm_r5_defconfig
+
+CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-r5-beagleboneai64"
+CONFIG_SPL_OF_LIST="k3-j721e-r5-beagleboneai64"
+
+# No ESM, PMIC or AVS adjustment till PMIC is enabled
+CONFIG_ESM_K3=n
+CONFIG_K3_AVS0=n
+CONFIG_ESM_PMIC=n
+
+# Do not use emmc boot - we will use FS only
+CONFIG_SUPPORT_EMMC_BOOT=n
+
+CONFIG_HBMC_AM654=n
+# No dependency on EEPROM detection
+CONFIG_TI_I2C_BOARD_DETECT=n
+# No board fixup to do
+CONFIG_OF_BOARD_SETUP=n
-- 
2.40.0