[PATCH 1/1] pico-imx7d: fix typo in AR8035 comment

[Fabio Estevam]

Hi Benjamin,

On Fri, Nov 3, 2023 at 6:16 PM <egyszeregy at freemail.hu> wrote:
>
> From: Benjamin Szőke <egyszeregy at freemail.hu>
>
> Signed-off-by: Benjamin Szőke <egyszeregy at freemail.hu>
> ---
>  board/technexion/pico-imx7d/pico-imx7d.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c
> index 6e98b85b28..7f5a092457 100644
> --- a/board/technexion/pico-imx7d/pico-imx7d.c
> +++ b/board/technexion/pico-imx7d/pico-imx7d.c
> @@ -106,7 +106,7 @@ int board_phy_config(struct phy_device *phydev)
>  {
>         unsigned short val;
>
> -       /* To enable AR8035 ouput a 125MHz clk from CLK_25M */
> +       /* To enable AR8035 output a 125MHz clk from CLK_25M */

After looking closer to this code, now that we have Ethernet DM in
place, this whole board_phy_config()
can be removed completely. This also causes the typo to be removed :-)

Here is the patch I sent:
https://lore.kernel.org/u-boot/20231103224733.59410-1-festevam@gmail.com/