[PATCH v3 1/1] sunxi: H616: add LPDDR4 DRAM support
Jernej Škrabec
jernej.skrabec at gmail.com
Sat Nov 4 09:31:18 CET 2023
Hi Mikhail,
I have some notes on LPDDR4 from a long time ago. It mostly matches to your
code, but please take a look at comments below.
Note that I have extra code, not included in this patch, for
mctl_phy_read_training(). At the very beginning, before any other register
access is done, this should be added:
if (para->type == SUNXI_DRAM_TYPE_LPDDR4) {
writel(0, SUNXI_DRAM_PHY0_BASE + 0x800);
writel(0, SUNXI_DRAM_PHY0_BASE + 0x81c);
}
Maybe that will help with other LPDDR4 boards?
On Saturday, November 4, 2023 7:22:48 AM CET Mikhail Kalashnikov wrote:
> From: iuncuim <iuncuim at gmail.com>
>
> The H616 SoC family has support for several types of DRAM: DDR3,
> LPDDR3, DDR4 and LPDDR4.
> At the moment, the driver only supports DDR3 and LPDDR3 memory.
> Let's extend the driver to support the LPDDR4 memory. This type
> of memory widely used in device with T507(-H) SoC and new orangepi
> zero3 with H618.
> The compatibility with T507 is not yet complete, because there
> is difference in the phy_init array.
> The LPDDR4-2133 timings correspond to DRAM Rayson RS1G32LO4D2BDS-53BT
> found on the NOR SPI from the Orangepi Zero 3 4GB.
>
> Signed-off-by: Mikhail Kalashnikov <iuncuim at gmail.com>
>
> ---
> .../include/asm/arch-sunxi/dram_sun50i_h616.h | 2 +
> arch/arm/mach-sunxi/Kconfig | 17 ++
> arch/arm/mach-sunxi/dram_sun50i_h616.c | 197 ++++++++++++++----
> arch/arm/mach-sunxi/dram_timings/Makefile | 1 +
> .../dram_timings/h616_lpddr4_2133.c | 95 +++++++++
> 5 files changed, 277 insertions(+), 35 deletions(-)
> create mode 100644 arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c
>
> diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
> b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h index
> 11774deded..a8fdda124a 100644
> --- a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
> +++ b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
> @@ -130,6 +130,7 @@ check_member(sunxi_mctl_ctl_reg, unk_0x4240, 0x4240);
> #define MSTR_DEVICETYPE_LPDDR2 BIT(2)
> #define MSTR_DEVICETYPE_LPDDR3 BIT(3)
> #define MSTR_DEVICETYPE_DDR4 BIT(4)
> +#define MSTR_DEVICETYPE_LPDDR4 BIT(5)
> #define MSTR_DEVICETYPE_MASK GENMASK(5, 0)
> #define MSTR_2TMODE BIT(10)
> #define MSTR_BUSWIDTH_FULL (0 << 12)
> @@ -154,6 +155,7 @@ struct dram_para {
> u32 odt_en;
> u32 tpr0;
> u32 tpr2;
> + u32 tpr6;
> u32 tpr10;
> u32 tpr11;
> u32 tpr12;
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 9d5df2c102..e65bcb36a2 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -85,6 +85,12 @@ config DRAM_SUN50I_H616_TPR2
> help
> TPR2 value from vendor DRAM settings.
>
> +config DRAM_SUN50I_H616_TPR6
> + hex "H616 DRAM TPR6 parameter"
> + default 0x3300c080
> + help
> + TPR6 value from vendor DRAM settings.
> +
> config DRAM_SUN50I_H616_TPR10
> hex "H616 DRAM TPR10 parameter"
> help
> @@ -441,6 +447,9 @@ config SUNXI_DRAM_DDR2
> config SUNXI_DRAM_LPDDR3
> bool
>
> +config SUNXI_DRAM_LPDDR4
> + bool
> +
> choice
> prompt "DRAM Type and Timing"
> default SUNXI_DRAM_DDR3_1333 if !MACH_SUN8I_V3S
> @@ -484,6 +493,14 @@ config SUNXI_DRAM_H616_LPDDR3
> This option is the LPDDR3 timing used by the stock boot0 by
> Allwinner.
>
> +config SUNXI_DRAM_H616_LPDDR4
> + bool "LPDDR4 DRAM chips on the H616 DRAM controller"
> + select SUNXI_DRAM_LPDDR4
> + depends on DRAM_SUN50I_H616
> + help
> + This option is the LPDDR4 timing used by the stock boot0 by
> + Allwinner.
> +
> config SUNXI_DRAM_H616_DDR3_1333
> bool "DDR3-1333 boot0 timings on the H616 DRAM controller"
> select SUNXI_DRAM_DDR3
> diff --git a/arch/arm/mach-sunxi/dram_sun50i_h616.c
> b/arch/arm/mach-sunxi/dram_sun50i_h616.c index ba5659d409..185f35850a
> 100644
> --- a/arch/arm/mach-sunxi/dram_sun50i_h616.c
> +++ b/arch/arm/mach-sunxi/dram_sun50i_h616.c
> @@ -238,6 +238,11 @@ static const u8 phy_init[] = {
> 0x08, 0x01, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
> 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x07,
> 0x17, 0x19, 0x1a
> +#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR4)
> + 0x02, 0x00, 0x17, 0x05, 0x04, 0x19, 0x06, 0x07,
> + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
> + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x01,
> + 0x18, 0x03, 0x1a
> #endif
> };
>
> @@ -246,8 +251,13 @@ static void mctl_phy_configure_odt(const struct
> dram_para *para) {
> uint32_t val_lo, val_hi;
>
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x390, BIT(5), BIT(4));
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x3d0, BIT(5), BIT(4));
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x410, BIT(5), BIT(4));
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x450, BIT(5), BIT(4));
I don't have above block. Something from newer libdram? Is it applicable to
all DRAM types?
> +
> val_lo = para->dx_dri;
> - val_hi = para->dx_dri;
> + val_hi = (para->type == SUNXI_DRAM_TYPE_LPDDR4) ? 0x04040404 :
> para->dx_dri; writel_relaxed(MASK_BYTE(val_lo, 0), SUNXI_DRAM_PHY0_BASE +
> 0x388); writel_relaxed(MASK_BYTE(val_hi, 0), SUNXI_DRAM_PHY0_BASE + 0x38c);
> writel_relaxed(MASK_BYTE(val_lo, 1), SUNXI_DRAM_PHY0_BASE + 0x3c8); @@
> -265,7 +275,7 @@ static void mctl_phy_configure_odt(const struct dram_para
> *para) writel_relaxed(MASK_BYTE(val_hi, 1), SUNXI_DRAM_PHY0_BASE + 0x34c);
>
> val_lo = (para->type == SUNXI_DRAM_TYPE_LPDDR3) ? 0 : para-
>dx_odt;
> - val_hi = para->dx_odt;
> + val_hi = (para->type == SUNXI_DRAM_TYPE_LPDDR4) ? 0 : para->dx_odt;
> writel_relaxed(MASK_BYTE(val_lo, 0), SUNXI_DRAM_PHY0_BASE +
0x380);
> writel_relaxed(MASK_BYTE(val_hi, 0), SUNXI_DRAM_PHY0_BASE +
0x384);
> writel_relaxed(MASK_BYTE(val_lo, 1), SUNXI_DRAM_PHY0_BASE +
0x3c0);
> @@ -578,6 +588,8 @@ static void mctl_phy_bit_delay_compensation(const struct
> dram_para *para) clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x60, 1);
> setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 8);
> clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x10);
> + if (para->type == SUNXI_DRAM_TYPE_LPDDR4)
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x4,
0x80);
>
> if (para->tpr10 & BIT(30))
> val = para->tpr11 & 0x3f;
> @@ -791,8 +803,9 @@ static void mctl_phy_ca_bit_delay_compensation(const
> struct dram_para *para, writel(val, SUNXI_DRAM_PHY0_BASE + 0x7e0);
> writel(val, SUNXI_DRAM_PHY0_BASE + 0x7f4);
>
> - if (para->type == SUNXI_DRAM_TYPE_DDR3) {
> - val = (para->tpr10 >> 7) & 0x1e;
> + val = (para->tpr10 >> 7) & 0x1e;
> + switch (para->type) {
> + case SUNXI_DRAM_TYPE_DDR3:
> if (para->tpr2 & 1) {
> writel(val, SUNXI_DRAM_PHY0_BASE + 0x794);
> if (config->ranks == 2) {
> @@ -818,8 +831,8 @@ static void mctl_phy_ca_bit_delay_compensation(const
> struct dram_para *para, writel(val, SUNXI_DRAM_PHY0_BASE + 0x7b8);
> }
> }
> - } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
> - val = (para->tpr10 >> 7) & 0x1e;
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR3:
> if (para->tpr2 & 1) {
> writel(val, SUNXI_DRAM_PHY0_BASE + 0x7a0);
> if (config->ranks == 2) {
> @@ -833,7 +846,18 @@ static void mctl_phy_ca_bit_delay_compensation(const
> struct dram_para *para, writel(val, SUNXI_DRAM_PHY0_BASE + 0x7f8);
> }
> }
> - }
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR4:
> + if (para->tpr2 & 1) {
> + writel(val, SUNXI_DRAM_PHY0_BASE + 0x788);
> + } else {
> + writel(val, SUNXI_DRAM_PHY0_BASE + 0x794);
> + };
> + break;
> + case SUNXI_DRAM_TYPE_DDR4:
> + default:
> + panic("This DRAM setup is currently not supported.\n");
> + };
> }
>
> static bool mctl_phy_init(const struct dram_para *para,
> @@ -846,30 +870,42 @@ static bool mctl_phy_init(const struct dram_para
> *para, u32 val, val2, *ptr, mr0, mr2;
> int i;
>
> + if (para->type == SUNXI_DRAM_TYPE_LPDDR4)
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x4,0x80);
> +
> if (config->bus_full_width)
> val = 0xf;
> else
> val = 3;
> clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x3c, 0xf, val);
>
> - if (para->tpr2 & 0x100) {
> - if (para->type == SUNXI_DRAM_TYPE_DDR3) {
> + switch (para->type) {
> + case SUNXI_DRAM_TYPE_DDR3:
> + if (para->tpr2 & 0x100) {
> val = 9;
> val2 = 7;
> - } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
> - // untested setup: use some values for now
> - val = 14;
> - val2 = 8;
> - }
> - } else {
> - if (para->type == SUNXI_DRAM_TYPE_DDR3) {
> + } else {
> val = 13;
> val2 = 9;
> - } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
> + }
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR3:
> + if (para->tpr2 & 0x100) {
> + val = 12;
> + val2 = 6;
> + } else {
> val = 14;
> val2 = 8;
> }
> - }
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR4:
> + val = 20;
> + val2 = 10;
> + break;
> + case SUNXI_DRAM_TYPE_DDR4:
> + default:
> + panic("This DRAM setup is currently not supported.\n");
> + };
>
> writel(val, SUNXI_DRAM_PHY0_BASE + 0x14);
> writel(val, SUNXI_DRAM_PHY0_BASE + 0x35c);
> @@ -893,19 +929,40 @@ static bool mctl_phy_init(const struct dram_para
> *para, if (para->tpr10 & TPR10_CA_BIT_DELAY)
> mctl_phy_ca_bit_delay_compensation(para, config);
>
> - if (para->type == SUNXI_DRAM_TYPE_DDR3)
> - val = 0x80;
> - else if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
> - val = 0xc0;
> + switch (para->type) {
> + case SUNXI_DRAM_TYPE_DDR3:
> + val = para->tpr6 & 0xff;
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR3:
> + val = para->tpr6 >> 8 & 0xff;
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR4:
> + val = para->tpr6 >> 24 & 0xff;
> + break;
> + case SUNXI_DRAM_TYPE_DDR4:
> + default:
> + panic("This DRAM setup is currently not supported.\n");
> + };
> +
> writel(val, SUNXI_DRAM_PHY0_BASE + 0x3dc);
> writel(val, SUNXI_DRAM_PHY0_BASE + 0x45c);
>
> mctl_phy_configure_odt(para);
>
> - if (para->type == SUNXI_DRAM_TYPE_DDR3)
> + switch (para->type) {
> + case SUNXI_DRAM_TYPE_DDR3:
> val = 0x0a;
> - else if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR3:
> val = 0x0b;
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR4:
> + val = 0x0d;
> + break;
> + case SUNXI_DRAM_TYPE_DDR4:
> + default:
> + panic("This DRAM setup is currently not supported.\n");
> + };
> clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 4, 0x7, val);
>
> if (para->clk <= 672)
> @@ -955,8 +1012,8 @@ static bool mctl_phy_init(const struct dram_para *para,
> mr0 = 0x1f14;
> mr2 = 0x20;
> }
> -
> - if (para->type == SUNXI_DRAM_TYPE_DDR3) {
> + switch (para->type) {
> + case SUNXI_DRAM_TYPE_DDR3:
> writel(mr0, &mctl_ctl->mrctrl1);
> writel(0x80000030, &mctl_ctl->mrctrl0);
> mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> @@ -972,7 +1029,8 @@ static bool mctl_phy_init(const struct dram_para *para,
> writel(0, &mctl_ctl->mrctrl1);
> writel(0x80003030, &mctl_ctl->mrctrl0);
> mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> - } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR3:
> writel(mr0, &mctl_ctl->mrctrl1);
> writel(0x800000f0, &mctl_ctl->mrctrl0);
> mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> @@ -988,7 +1046,48 @@ static bool mctl_phy_init(const struct dram_para
> *para, writel(0x301, &mctl_ctl->mrctrl1);
> writel(0x800000f0, &mctl_ctl->mrctrl0);
> mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> - }
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR4:
> + writel(0x0, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
I don't have above block. Maybe difference from newer version of libdram code?
> +
> + writel(0x134, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0x21b, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0x333, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0x403, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0xb04, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0xc72, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0xe09, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0x1624, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> + break;
> + case SUNXI_DRAM_TYPE_DDR4:
> + default:
> + panic("This DRAM setup is currently not supported.\n");
> + };
>
> writel(0, SUNXI_DRAM_PHY0_BASE + 0x54);
>
> @@ -1057,17 +1156,29 @@ static bool mctl_ctrl_init(const struct dram_para
> *para,
>
> setbits_le32(&mctl_com->unk_0x008, 0xff00);
>
> + if (para->type == SUNXI_DRAM_TYPE_LPDDR4)
> + writel(1, SUNXI_DRAM_COM_BASE + 0x50);
> clrsetbits_le32(&mctl_ctl->sched[0], 0xff00, 0x3000);
>
> writel(0, &mctl_ctl->hwlpctl);
>
> setbits_le32(&mctl_com->unk_0x008, 0xff00);
>
> - reg_val = MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(config->ranks);
> - if (para->type == SUNXI_DRAM_TYPE_DDR3)
> - reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE;
> - else if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
> - reg_val |= MSTR_DEVICETYPE_LPDDR3;
> + reg_val = MSTR_ACTIVE_RANKS(config->ranks);
> + switch (para->type) {
> + case SUNXI_DRAM_TYPE_DDR3:
> + reg_val |= MSTR_BURST_LENGTH(8) | MSTR_DEVICETYPE_DDR3 |
MSTR_2TMODE;
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR3:
> + reg_val |= MSTR_BURST_LENGTH(8) |
MSTR_DEVICETYPE_LPDDR3;
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR4:
> + reg_val |= MSTR_BURST_LENGTH(16) |
MSTR_DEVICETYPE_LPDDR4;
> + break;
> + case SUNXI_DRAM_TYPE_DDR4:
> + default:
> + panic("This DRAM setup is currently not supported.\n");
> + };
> if (config->bus_full_width)
> reg_val |= MSTR_BUSWIDTH_FULL;
> else
> @@ -1079,10 +1190,20 @@ static bool mctl_ctrl_init(const struct dram_para
> *para, else
> writel(0x0201, &mctl_ctl->odtmap);
>
> - if (para->type == SUNXI_DRAM_TYPE_DDR3)
> + switch (para->type) {
> + case SUNXI_DRAM_TYPE_DDR3:
> reg_val = 0x06000400;
> - else if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR3:
> reg_val = 0x09020400;
> + break;
> + case SUNXI_DRAM_TYPE_LPDDR4:
> + reg_val = 0x04000400;
> + break;
> + case SUNXI_DRAM_TYPE_DDR4:
> + default:
> + panic("This DRAM setup is currently not supported.\n");
> + };
> writel(reg_val, &mctl_ctl->odtcfg);
> writel(reg_val, &mctl_ctl->unk_0x2240);
> writel(reg_val, &mctl_ctl->unk_0x3240);
I have extra "writel(BIT(31), &mctl_com->cr);" after this block for all DRAM
types. Not sure if it changes anything.
> @@ -1102,6 +1223,9 @@ static bool mctl_ctrl_init(const struct dram_para
> *para, setbits_le32(&mctl_ctl->unk_0x3180, BIT(31) | BIT(30));
> setbits_le32(&mctl_ctl->unk_0x4180, BIT(31) | BIT(30));
>
> + if (para->type == SUNXI_DRAM_TYPE_LPDDR4)
> + setbits_le32(&mctl_ctl->dbictl, 1);
> +
> setbits_le32(&mctl_ctl->rfshctl3, BIT(0));
> clrbits_le32(&mctl_ctl->dfimisc, BIT(0));
>
> @@ -1224,6 +1348,8 @@ static const struct dram_para para = {
> .type = SUNXI_DRAM_TYPE_DDR3,
> #elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR3)
> .type = SUNXI_DRAM_TYPE_LPDDR3,
> +#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR4)
> + .type = SUNXI_DRAM_TYPE_LPDDR4,
> #endif
> .dx_odt = CONFIG_DRAM_SUN50I_H616_DX_ODT,
> .dx_dri = CONFIG_DRAM_SUN50I_H616_DX_DRI,
> @@ -1231,6 +1357,7 @@ static const struct dram_para para = {
> .odt_en = CONFIG_DRAM_SUN50I_H616_ODT_EN,
> .tpr0 = CONFIG_DRAM_SUN50I_H616_TPR0,
> .tpr2 = CONFIG_DRAM_SUN50I_H616_TPR2,
> + .tpr6 = CONFIG_DRAM_SUN50I_H616_TPR6,
> .tpr10 = CONFIG_DRAM_SUN50I_H616_TPR10,
> .tpr11 = CONFIG_DRAM_SUN50I_H616_TPR11,
> .tpr12 = CONFIG_DRAM_SUN50I_H616_TPR12,
> diff --git a/arch/arm/mach-sunxi/dram_timings/Makefile
> b/arch/arm/mach-sunxi/dram_timings/Makefile index 8bfd99448a..5f20341924
> 100644
> --- a/arch/arm/mach-sunxi/dram_timings/Makefile
> +++ b/arch/arm/mach-sunxi/dram_timings/Makefile
> @@ -5,3 +5,4 @@ obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o
> obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o
> obj-$(CONFIG_SUNXI_DRAM_H616_DDR3_1333) += h616_ddr3_1333.o
> obj-$(CONFIG_SUNXI_DRAM_H616_LPDDR3) += h616_lpddr3.o
> +obj-$(CONFIG_SUNXI_DRAM_H616_LPDDR4) += h616_lpddr4_2133.o
> diff --git a/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c
> b/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c new file mode 100644
> index 0000000000..c11cb8678f
> --- /dev/null
> +++ b/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c
> @@ -0,0 +1,95 @@
> +/*
> + * sun50i H616 LPDDR4-2133 timings, as programmed by Allwinner's boot0
> + * for orangepi zero3 with the H618 and LPDDR4 memory.
> + *
> + * (C) Copyright 2023 Mikhail Kalashnikov <iuncuim at gmail.com>
> + * Based on H6 DDR3 timings:
> + * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec at siol.net>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/arch/dram.h>
> +#include <asm/arch/cpu.h>
> +
> +void mctl_set_timing_params(const struct dram_para *para)
> +{
> + struct sunxi_mctl_ctl_reg * const mctl_ctl =
> + (struct sunxi_mctl_ctl_reg
*)SUNXI_DRAM_CTL0_BASE;
> +
> + u8 tccd = 4;
> + u8 tfaw = ns_to_t(40);
> + u8 trrd = max(ns_to_t(10), 2);
> + u8 trcd = max(ns_to_t(18), 2);
> + u8 trc = ns_to_t(65);
> + u8 txp = max(ns_to_t(8), 2);
> + u8 trtp = max(ns_to_t(8), 4);
> + u8 trp = ns_to_t(21);
> + u8 tras = ns_to_t(42);
> + u16 trefi = ns_to_t(3904) / 32;
> + u16 trfc = ns_to_t(280);
My notes say 180 instead of 280. Did you check if register value matches if
booted with boot0?
Best regards,
Jernej
> + u16 txsr = ns_to_t(190);
> +
> + u8 tmrw = max(ns_to_t(14), 5);
> + u8 tmrd = tmrw;
> + u8 tmod = 12;
> + u8 tcke = max(ns_to_t(15), 2);
> + u8 tcksrx = max(ns_to_t(2), 2);
> + u8 tcksre = max(ns_to_t(5), 2);
> + u8 tckesr = tcke;
> + u8 trasmax = (trefi * 9) / 32;
> + u8 txs = 4;
> + u8 txsdll = 16;
> + u8 txsabort = 4;
> + u8 txsfast = 4;
> + u8 tcl = 10;
> + u8 tcwl = 5;
> + u8 t_rdata_en = 17;
> + u8 tphy_wrlat = 5;
> +
> + u8 twtp = 24;
> + u8 twr2rd = max(trrd, (u8)4) + 14;
> + u8 trd2wr = (ns_to_t(4) + 17) - ns_to_t(1);
> +
> + /* set DRAM timing */
> + writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
> + &mctl_ctl->dramtmg[0]);
> + writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
> + writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
> + &mctl_ctl->dramtmg[2]);
> + writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
> + writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
> + &mctl_ctl->dramtmg[4]);
> + writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
> + &mctl_ctl->dramtmg[5]);
> + /* Value suggested by ZynqMP manual and used by libdram */
> + writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
> + writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
> + &mctl_ctl->dramtmg[8]);
> + writel(0x00020208, &mctl_ctl->dramtmg[9]);
> + writel(0xE0C05, &mctl_ctl->dramtmg[10]);
> + writel(0x440C021C, &mctl_ctl->dramtmg[11]);
> + writel(8, &mctl_ctl->dramtmg[12]);
> + writel(0xA100002, &mctl_ctl->dramtmg[13]);
> + writel(txsr, &mctl_ctl->dramtmg[14]);
> +
> + clrsetbits_le32(&mctl_ctl->init[0], 0xC0000FFF, 0x3f0);
> + writel(0x01f20000, &mctl_ctl->init[1]);
> + writel(0x00000d05, &mctl_ctl->init[2]);
> + writel(0, &mctl_ctl->dfimisc);
> + writel(0x0034001b, &mctl_ctl->init[3]);
> + writel(0x00330000, &mctl_ctl->init[4]);
> + writel(0x00040072, &mctl_ctl->init[6]);
> + writel(0x00240009, &mctl_ctl->init[7]);
> +
> + clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
> +
> + /* Configure DFI timing */
> + writel(tphy_wrlat | 0x2000000 | (t_rdata_en << 16) | 0x808000,
> + &mctl_ctl->dfitmg0);
> + writel(0x100202, &mctl_ctl->dfitmg1);
> +
> + /* set refresh timing */
> + writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
> +}
More information about the U-Boot
mailing list