[PATCH v3 1/1] sunxi: H616: add LPDDR4 DRAM support
Mikhail Kalashnikov
iuncuim at gmail.com
Sat Nov 4 07:22:48 CET 2023
From: iuncuim <iuncuim at gmail.com>
The H616 SoC family has support for several types of DRAM: DDR3,
LPDDR3, DDR4 and LPDDR4.
At the moment, the driver only supports DDR3 and LPDDR3 memory.
Let's extend the driver to support the LPDDR4 memory. This type
of memory widely used in device with T507(-H) SoC and new orangepi
zero3 with H618.
The compatibility with T507 is not yet complete, because there
is difference in the phy_init array.
The LPDDR4-2133 timings correspond to DRAM Rayson RS1G32LO4D2BDS-53BT
found on the NOR SPI from the Orangepi Zero 3 4GB.
Signed-off-by: Mikhail Kalashnikov <iuncuim at gmail.com>
---
.../include/asm/arch-sunxi/dram_sun50i_h616.h | 2 +
arch/arm/mach-sunxi/Kconfig | 17 ++
arch/arm/mach-sunxi/dram_sun50i_h616.c | 197 ++++++++++++++----
arch/arm/mach-sunxi/dram_timings/Makefile | 1 +
.../dram_timings/h616_lpddr4_2133.c | 95 +++++++++
5 files changed, 277 insertions(+), 35 deletions(-)
create mode 100644 arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c
diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
index 11774deded..a8fdda124a 100644
--- a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
+++ b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
@@ -130,6 +130,7 @@ check_member(sunxi_mctl_ctl_reg, unk_0x4240, 0x4240);
#define MSTR_DEVICETYPE_LPDDR2 BIT(2)
#define MSTR_DEVICETYPE_LPDDR3 BIT(3)
#define MSTR_DEVICETYPE_DDR4 BIT(4)
+#define MSTR_DEVICETYPE_LPDDR4 BIT(5)
#define MSTR_DEVICETYPE_MASK GENMASK(5, 0)
#define MSTR_2TMODE BIT(10)
#define MSTR_BUSWIDTH_FULL (0 << 12)
@@ -154,6 +155,7 @@ struct dram_para {
u32 odt_en;
u32 tpr0;
u32 tpr2;
+ u32 tpr6;
u32 tpr10;
u32 tpr11;
u32 tpr12;
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 9d5df2c102..e65bcb36a2 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -85,6 +85,12 @@ config DRAM_SUN50I_H616_TPR2
help
TPR2 value from vendor DRAM settings.
+config DRAM_SUN50I_H616_TPR6
+ hex "H616 DRAM TPR6 parameter"
+ default 0x3300c080
+ help
+ TPR6 value from vendor DRAM settings.
+
config DRAM_SUN50I_H616_TPR10
hex "H616 DRAM TPR10 parameter"
help
@@ -441,6 +447,9 @@ config SUNXI_DRAM_DDR2
config SUNXI_DRAM_LPDDR3
bool
+config SUNXI_DRAM_LPDDR4
+ bool
+
choice
prompt "DRAM Type and Timing"
default SUNXI_DRAM_DDR3_1333 if !MACH_SUN8I_V3S
@@ -484,6 +493,14 @@ config SUNXI_DRAM_H616_LPDDR3
This option is the LPDDR3 timing used by the stock boot0 by
Allwinner.
+config SUNXI_DRAM_H616_LPDDR4
+ bool "LPDDR4 DRAM chips on the H616 DRAM controller"
+ select SUNXI_DRAM_LPDDR4
+ depends on DRAM_SUN50I_H616
+ help
+ This option is the LPDDR4 timing used by the stock boot0 by
+ Allwinner.
+
config SUNXI_DRAM_H616_DDR3_1333
bool "DDR3-1333 boot0 timings on the H616 DRAM controller"
select SUNXI_DRAM_DDR3
diff --git a/arch/arm/mach-sunxi/dram_sun50i_h616.c b/arch/arm/mach-sunxi/dram_sun50i_h616.c
index ba5659d409..185f35850a 100644
--- a/arch/arm/mach-sunxi/dram_sun50i_h616.c
+++ b/arch/arm/mach-sunxi/dram_sun50i_h616.c
@@ -238,6 +238,11 @@ static const u8 phy_init[] = {
0x08, 0x01, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x07,
0x17, 0x19, 0x1a
+#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR4)
+ 0x02, 0x00, 0x17, 0x05, 0x04, 0x19, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x01,
+ 0x18, 0x03, 0x1a
#endif
};
@@ -246,8 +251,13 @@ static void mctl_phy_configure_odt(const struct dram_para *para)
{
uint32_t val_lo, val_hi;
+ clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x390, BIT(5), BIT(4));
+ clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x3d0, BIT(5), BIT(4));
+ clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x410, BIT(5), BIT(4));
+ clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x450, BIT(5), BIT(4));
+
val_lo = para->dx_dri;
- val_hi = para->dx_dri;
+ val_hi = (para->type == SUNXI_DRAM_TYPE_LPDDR4) ? 0x04040404 : para->dx_dri;
writel_relaxed(MASK_BYTE(val_lo, 0), SUNXI_DRAM_PHY0_BASE + 0x388);
writel_relaxed(MASK_BYTE(val_hi, 0), SUNXI_DRAM_PHY0_BASE + 0x38c);
writel_relaxed(MASK_BYTE(val_lo, 1), SUNXI_DRAM_PHY0_BASE + 0x3c8);
@@ -265,7 +275,7 @@ static void mctl_phy_configure_odt(const struct dram_para *para)
writel_relaxed(MASK_BYTE(val_hi, 1), SUNXI_DRAM_PHY0_BASE + 0x34c);
val_lo = (para->type == SUNXI_DRAM_TYPE_LPDDR3) ? 0 : para->dx_odt;
- val_hi = para->dx_odt;
+ val_hi = (para->type == SUNXI_DRAM_TYPE_LPDDR4) ? 0 : para->dx_odt;
writel_relaxed(MASK_BYTE(val_lo, 0), SUNXI_DRAM_PHY0_BASE + 0x380);
writel_relaxed(MASK_BYTE(val_hi, 0), SUNXI_DRAM_PHY0_BASE + 0x384);
writel_relaxed(MASK_BYTE(val_lo, 1), SUNXI_DRAM_PHY0_BASE + 0x3c0);
@@ -578,6 +588,8 @@ static void mctl_phy_bit_delay_compensation(const struct dram_para *para)
clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x60, 1);
setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 8);
clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x10);
+ if (para->type == SUNXI_DRAM_TYPE_LPDDR4)
+ clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x4, 0x80);
if (para->tpr10 & BIT(30))
val = para->tpr11 & 0x3f;
@@ -791,8 +803,9 @@ static void mctl_phy_ca_bit_delay_compensation(const struct dram_para *para,
writel(val, SUNXI_DRAM_PHY0_BASE + 0x7e0);
writel(val, SUNXI_DRAM_PHY0_BASE + 0x7f4);
- if (para->type == SUNXI_DRAM_TYPE_DDR3) {
- val = (para->tpr10 >> 7) & 0x1e;
+ val = (para->tpr10 >> 7) & 0x1e;
+ switch (para->type) {
+ case SUNXI_DRAM_TYPE_DDR3:
if (para->tpr2 & 1) {
writel(val, SUNXI_DRAM_PHY0_BASE + 0x794);
if (config->ranks == 2) {
@@ -818,8 +831,8 @@ static void mctl_phy_ca_bit_delay_compensation(const struct dram_para *para,
writel(val, SUNXI_DRAM_PHY0_BASE + 0x7b8);
}
}
- } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
- val = (para->tpr10 >> 7) & 0x1e;
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR3:
if (para->tpr2 & 1) {
writel(val, SUNXI_DRAM_PHY0_BASE + 0x7a0);
if (config->ranks == 2) {
@@ -833,7 +846,18 @@ static void mctl_phy_ca_bit_delay_compensation(const struct dram_para *para,
writel(val, SUNXI_DRAM_PHY0_BASE + 0x7f8);
}
}
- }
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR4:
+ if (para->tpr2 & 1) {
+ writel(val, SUNXI_DRAM_PHY0_BASE + 0x788);
+ } else {
+ writel(val, SUNXI_DRAM_PHY0_BASE + 0x794);
+ };
+ break;
+ case SUNXI_DRAM_TYPE_DDR4:
+ default:
+ panic("This DRAM setup is currently not supported.\n");
+ };
}
static bool mctl_phy_init(const struct dram_para *para,
@@ -846,30 +870,42 @@ static bool mctl_phy_init(const struct dram_para *para,
u32 val, val2, *ptr, mr0, mr2;
int i;
+ if (para->type == SUNXI_DRAM_TYPE_LPDDR4)
+ clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x4,0x80);
+
if (config->bus_full_width)
val = 0xf;
else
val = 3;
clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x3c, 0xf, val);
- if (para->tpr2 & 0x100) {
- if (para->type == SUNXI_DRAM_TYPE_DDR3) {
+ switch (para->type) {
+ case SUNXI_DRAM_TYPE_DDR3:
+ if (para->tpr2 & 0x100) {
val = 9;
val2 = 7;
- } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
- // untested setup: use some values for now
- val = 14;
- val2 = 8;
- }
- } else {
- if (para->type == SUNXI_DRAM_TYPE_DDR3) {
+ } else {
val = 13;
val2 = 9;
- } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
+ }
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR3:
+ if (para->tpr2 & 0x100) {
+ val = 12;
+ val2 = 6;
+ } else {
val = 14;
val2 = 8;
}
- }
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR4:
+ val = 20;
+ val2 = 10;
+ break;
+ case SUNXI_DRAM_TYPE_DDR4:
+ default:
+ panic("This DRAM setup is currently not supported.\n");
+ };
writel(val, SUNXI_DRAM_PHY0_BASE + 0x14);
writel(val, SUNXI_DRAM_PHY0_BASE + 0x35c);
@@ -893,19 +929,40 @@ static bool mctl_phy_init(const struct dram_para *para,
if (para->tpr10 & TPR10_CA_BIT_DELAY)
mctl_phy_ca_bit_delay_compensation(para, config);
- if (para->type == SUNXI_DRAM_TYPE_DDR3)
- val = 0x80;
- else if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
- val = 0xc0;
+ switch (para->type) {
+ case SUNXI_DRAM_TYPE_DDR3:
+ val = para->tpr6 & 0xff;
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR3:
+ val = para->tpr6 >> 8 & 0xff;
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR4:
+ val = para->tpr6 >> 24 & 0xff;
+ break;
+ case SUNXI_DRAM_TYPE_DDR4:
+ default:
+ panic("This DRAM setup is currently not supported.\n");
+ };
+
writel(val, SUNXI_DRAM_PHY0_BASE + 0x3dc);
writel(val, SUNXI_DRAM_PHY0_BASE + 0x45c);
mctl_phy_configure_odt(para);
- if (para->type == SUNXI_DRAM_TYPE_DDR3)
+ switch (para->type) {
+ case SUNXI_DRAM_TYPE_DDR3:
val = 0x0a;
- else if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR3:
val = 0x0b;
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR4:
+ val = 0x0d;
+ break;
+ case SUNXI_DRAM_TYPE_DDR4:
+ default:
+ panic("This DRAM setup is currently not supported.\n");
+ };
clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 4, 0x7, val);
if (para->clk <= 672)
@@ -955,8 +1012,8 @@ static bool mctl_phy_init(const struct dram_para *para,
mr0 = 0x1f14;
mr2 = 0x20;
}
-
- if (para->type == SUNXI_DRAM_TYPE_DDR3) {
+ switch (para->type) {
+ case SUNXI_DRAM_TYPE_DDR3:
writel(mr0, &mctl_ctl->mrctrl1);
writel(0x80000030, &mctl_ctl->mrctrl0);
mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
@@ -972,7 +1029,8 @@ static bool mctl_phy_init(const struct dram_para *para,
writel(0, &mctl_ctl->mrctrl1);
writel(0x80003030, &mctl_ctl->mrctrl0);
mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
- } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR3:
writel(mr0, &mctl_ctl->mrctrl1);
writel(0x800000f0, &mctl_ctl->mrctrl0);
mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
@@ -988,7 +1046,48 @@ static bool mctl_phy_init(const struct dram_para *para,
writel(0x301, &mctl_ctl->mrctrl1);
writel(0x800000f0, &mctl_ctl->mrctrl0);
mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
- }
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR4:
+ writel(0x0, &mctl_ctl->mrctrl1);
+ writel(0x80000030, &mctl_ctl->mrctrl0);
+ mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+ writel(0x134, &mctl_ctl->mrctrl1);
+ writel(0x80000030, &mctl_ctl->mrctrl0);
+ mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+ writel(0x21b, &mctl_ctl->mrctrl1);
+ writel(0x80000030, &mctl_ctl->mrctrl0);
+ mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+ writel(0x333, &mctl_ctl->mrctrl1);
+ writel(0x80000030, &mctl_ctl->mrctrl0);
+ mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+ writel(0x403, &mctl_ctl->mrctrl1);
+ writel(0x80000030, &mctl_ctl->mrctrl0);
+ mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+ writel(0xb04, &mctl_ctl->mrctrl1);
+ writel(0x80000030, &mctl_ctl->mrctrl0);
+ mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+ writel(0xc72, &mctl_ctl->mrctrl1);
+ writel(0x80000030, &mctl_ctl->mrctrl0);
+ mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+ writel(0xe09, &mctl_ctl->mrctrl1);
+ writel(0x80000030, &mctl_ctl->mrctrl0);
+ mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+ writel(0x1624, &mctl_ctl->mrctrl1);
+ writel(0x80000030, &mctl_ctl->mrctrl0);
+ mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+ break;
+ case SUNXI_DRAM_TYPE_DDR4:
+ default:
+ panic("This DRAM setup is currently not supported.\n");
+ };
writel(0, SUNXI_DRAM_PHY0_BASE + 0x54);
@@ -1057,17 +1156,29 @@ static bool mctl_ctrl_init(const struct dram_para *para,
setbits_le32(&mctl_com->unk_0x008, 0xff00);
+ if (para->type == SUNXI_DRAM_TYPE_LPDDR4)
+ writel(1, SUNXI_DRAM_COM_BASE + 0x50);
clrsetbits_le32(&mctl_ctl->sched[0], 0xff00, 0x3000);
writel(0, &mctl_ctl->hwlpctl);
setbits_le32(&mctl_com->unk_0x008, 0xff00);
- reg_val = MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(config->ranks);
- if (para->type == SUNXI_DRAM_TYPE_DDR3)
- reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE;
- else if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
- reg_val |= MSTR_DEVICETYPE_LPDDR3;
+ reg_val = MSTR_ACTIVE_RANKS(config->ranks);
+ switch (para->type) {
+ case SUNXI_DRAM_TYPE_DDR3:
+ reg_val |= MSTR_BURST_LENGTH(8) | MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE;
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR3:
+ reg_val |= MSTR_BURST_LENGTH(8) | MSTR_DEVICETYPE_LPDDR3;
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR4:
+ reg_val |= MSTR_BURST_LENGTH(16) | MSTR_DEVICETYPE_LPDDR4;
+ break;
+ case SUNXI_DRAM_TYPE_DDR4:
+ default:
+ panic("This DRAM setup is currently not supported.\n");
+ };
if (config->bus_full_width)
reg_val |= MSTR_BUSWIDTH_FULL;
else
@@ -1079,10 +1190,20 @@ static bool mctl_ctrl_init(const struct dram_para *para,
else
writel(0x0201, &mctl_ctl->odtmap);
- if (para->type == SUNXI_DRAM_TYPE_DDR3)
+ switch (para->type) {
+ case SUNXI_DRAM_TYPE_DDR3:
reg_val = 0x06000400;
- else if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR3:
reg_val = 0x09020400;
+ break;
+ case SUNXI_DRAM_TYPE_LPDDR4:
+ reg_val = 0x04000400;
+ break;
+ case SUNXI_DRAM_TYPE_DDR4:
+ default:
+ panic("This DRAM setup is currently not supported.\n");
+ };
writel(reg_val, &mctl_ctl->odtcfg);
writel(reg_val, &mctl_ctl->unk_0x2240);
writel(reg_val, &mctl_ctl->unk_0x3240);
@@ -1102,6 +1223,9 @@ static bool mctl_ctrl_init(const struct dram_para *para,
setbits_le32(&mctl_ctl->unk_0x3180, BIT(31) | BIT(30));
setbits_le32(&mctl_ctl->unk_0x4180, BIT(31) | BIT(30));
+ if (para->type == SUNXI_DRAM_TYPE_LPDDR4)
+ setbits_le32(&mctl_ctl->dbictl, 1);
+
setbits_le32(&mctl_ctl->rfshctl3, BIT(0));
clrbits_le32(&mctl_ctl->dfimisc, BIT(0));
@@ -1224,6 +1348,8 @@ static const struct dram_para para = {
.type = SUNXI_DRAM_TYPE_DDR3,
#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR3)
.type = SUNXI_DRAM_TYPE_LPDDR3,
+#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR4)
+ .type = SUNXI_DRAM_TYPE_LPDDR4,
#endif
.dx_odt = CONFIG_DRAM_SUN50I_H616_DX_ODT,
.dx_dri = CONFIG_DRAM_SUN50I_H616_DX_DRI,
@@ -1231,6 +1357,7 @@ static const struct dram_para para = {
.odt_en = CONFIG_DRAM_SUN50I_H616_ODT_EN,
.tpr0 = CONFIG_DRAM_SUN50I_H616_TPR0,
.tpr2 = CONFIG_DRAM_SUN50I_H616_TPR2,
+ .tpr6 = CONFIG_DRAM_SUN50I_H616_TPR6,
.tpr10 = CONFIG_DRAM_SUN50I_H616_TPR10,
.tpr11 = CONFIG_DRAM_SUN50I_H616_TPR11,
.tpr12 = CONFIG_DRAM_SUN50I_H616_TPR12,
diff --git a/arch/arm/mach-sunxi/dram_timings/Makefile b/arch/arm/mach-sunxi/dram_timings/Makefile
index 8bfd99448a..5f20341924 100644
--- a/arch/arm/mach-sunxi/dram_timings/Makefile
+++ b/arch/arm/mach-sunxi/dram_timings/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o
obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o
obj-$(CONFIG_SUNXI_DRAM_H616_DDR3_1333) += h616_ddr3_1333.o
obj-$(CONFIG_SUNXI_DRAM_H616_LPDDR3) += h616_lpddr3.o
+obj-$(CONFIG_SUNXI_DRAM_H616_LPDDR4) += h616_lpddr4_2133.o
diff --git a/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c b/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c
new file mode 100644
index 0000000000..c11cb8678f
--- /dev/null
+++ b/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c
@@ -0,0 +1,95 @@
+/*
+ * sun50i H616 LPDDR4-2133 timings, as programmed by Allwinner's boot0
+ * for orangepi zero3 with the H618 and LPDDR4 memory.
+ *
+ * (C) Copyright 2023 Mikhail Kalashnikov <iuncuim at gmail.com>
+ * Based on H6 DDR3 timings:
+ * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec at siol.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+
+void mctl_set_timing_params(const struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ u8 tccd = 4;
+ u8 tfaw = ns_to_t(40);
+ u8 trrd = max(ns_to_t(10), 2);
+ u8 trcd = max(ns_to_t(18), 2);
+ u8 trc = ns_to_t(65);
+ u8 txp = max(ns_to_t(8), 2);
+ u8 trtp = max(ns_to_t(8), 4);
+ u8 trp = ns_to_t(21);
+ u8 tras = ns_to_t(42);
+ u16 trefi = ns_to_t(3904) / 32;
+ u16 trfc = ns_to_t(280);
+ u16 txsr = ns_to_t(190);
+
+ u8 tmrw = max(ns_to_t(14), 5);
+ u8 tmrd = tmrw;
+ u8 tmod = 12;
+ u8 tcke = max(ns_to_t(15), 2);
+ u8 tcksrx = max(ns_to_t(2), 2);
+ u8 tcksre = max(ns_to_t(5), 2);
+ u8 tckesr = tcke;
+ u8 trasmax = (trefi * 9) / 32;
+ u8 txs = 4;
+ u8 txsdll = 16;
+ u8 txsabort = 4;
+ u8 txsfast = 4;
+ u8 tcl = 10;
+ u8 tcwl = 5;
+ u8 t_rdata_en = 17;
+ u8 tphy_wrlat = 5;
+
+ u8 twtp = 24;
+ u8 twr2rd = max(trrd, (u8)4) + 14;
+ u8 trd2wr = (ns_to_t(4) + 17) - ns_to_t(1);
+
+ /* set DRAM timing */
+ writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
+ &mctl_ctl->dramtmg[0]);
+ writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
+ writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
+ &mctl_ctl->dramtmg[2]);
+ writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
+ writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
+ &mctl_ctl->dramtmg[4]);
+ writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
+ &mctl_ctl->dramtmg[5]);
+ /* Value suggested by ZynqMP manual and used by libdram */
+ writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
+ writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
+ &mctl_ctl->dramtmg[8]);
+ writel(0x00020208, &mctl_ctl->dramtmg[9]);
+ writel(0xE0C05, &mctl_ctl->dramtmg[10]);
+ writel(0x440C021C, &mctl_ctl->dramtmg[11]);
+ writel(8, &mctl_ctl->dramtmg[12]);
+ writel(0xA100002, &mctl_ctl->dramtmg[13]);
+ writel(txsr, &mctl_ctl->dramtmg[14]);
+
+ clrsetbits_le32(&mctl_ctl->init[0], 0xC0000FFF, 0x3f0);
+ writel(0x01f20000, &mctl_ctl->init[1]);
+ writel(0x00000d05, &mctl_ctl->init[2]);
+ writel(0, &mctl_ctl->dfimisc);
+ writel(0x0034001b, &mctl_ctl->init[3]);
+ writel(0x00330000, &mctl_ctl->init[4]);
+ writel(0x00040072, &mctl_ctl->init[6]);
+ writel(0x00240009, &mctl_ctl->init[7]);
+
+ clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
+
+ /* Configure DFI timing */
+ writel(tphy_wrlat | 0x2000000 | (t_rdata_en << 16) | 0x808000,
+ &mctl_ctl->dfitmg0);
+ writel(0x100202, &mctl_ctl->dfitmg1);
+
+ /* set refresh timing */
+ writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
+}
--
2.42.0
More information about the U-Boot
mailing list