[PATCH 1/2] arm: stm32: Enable TCP, IPv6, wget on DH STM32MP15 DHSOM

[Marek Vasut]

Enable support for TCP protocol, wget, and IPv6 on this platform.
The former two allow users download payload into the U-Boot from
a web server, which may be more convenient or easier to set up
than TFTP server. The later is enabled to future proof the IP
stack on this platform.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Andreas Geisreiter <ageisreiter at dh-electronics.de>
Cc: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: u-boot at dh-electronics.com
Cc: uboot-stm32 at st-md-mailman.stormreply.com
---
 configs/stm32mp15_dhcom_basic_defconfig | 5 +++++
 configs/stm32mp15_dhcor_basic_defconfig | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index b6cd0a47fa7..08aac878f8e 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -76,7 +76,10 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP6=y
+CONFIG_CMD_TFTPPUT=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
+CONFIG_CMD_WGET=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -101,6 +104,8 @@ CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_TSIZE=y
 CONFIG_USE_SERVERIP=y
 CONFIG_SERVERIP="192.168.1.1"
+CONFIG_PROT_TCP_SACK=y
+CONFIG_IPV6=y
 CONFIG_STM32_ADC=y
 CONFIG_SPL_BLOCK_CACHE=y
 CONFIG_BOOTCOUNT_LIMIT=y
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index d1acf9c657e..8cd6924b580 100644
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -74,7 +74,10 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP6=y
+CONFIG_CMD_TFTPPUT=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
+CONFIG_CMD_WGET=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -99,6 +102,8 @@ CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_TSIZE=y
 CONFIG_USE_SERVERIP=y
 CONFIG_SERVERIP="192.168.1.1"
+CONFIG_PROT_TCP_SACK=y
+CONFIG_IPV6=y
 CONFIG_STM32_ADC=y
 CONFIG_SPL_BLOCK_CACHE=y
 CONFIG_BOOTCOUNT_LIMIT=y
-- 
2.42.0