[PATCH 1/2] arm: imx6: Enable TCP, IPv6, wget on DH i.MX6 DHCOM

Marek Vasut marex at denx.de
Sat Nov 4 17:32:20 CET 2023


Enable support for TCP protocol, wget, and IPv6 on this platform.
The former two allow users download payload into the U-Boot from
a web server, which may be more convenient or easier to set up
than TFTP server. The later is enabled to future proof the IP
stack on this platform.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
Cc: Andreas Geisreiter <ageisreiter at dh-electronics.de>
Cc: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: u-boot at dh-electronics.com
---
 configs/dh_imx6_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig
index 5a83b6a08a2..8d2d46ab659 100644
--- a/configs/dh_imx6_defconfig
+++ b/configs/dh_imx6_defconfig
@@ -55,6 +55,9 @@ CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_WDT=y
+CONFIG_CMD_DHCP6=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_WGET=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -71,6 +74,10 @@ CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="FEC"
 CONFIG_VERSION_VARIABLE=y
 CONFIG_ARP_TIMEOUT=200
+CONFIG_IP_DEFRAG=y
+CONFIG_TFTP_TSIZE=y
+CONFIG_PROT_TCP_SACK=y
+CONFIG_IPV6=y
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_DWC_AHSATA=y
 CONFIG_LBA48=y
-- 
2.42.0



More information about the U-Boot mailing list