[PATCH v6 02/25] arm: Disable SPL_FS_FAT when it isn't used

Sean Anderson seanga2 at gmail.com
Mon Nov 6 03:25:40 CET 2023


Several boards enable SPL_FS_FAT and SPL_LIBDISK_SUPPORT when they can't be
used (as there is no block device support enabled). Disable these configs.
The list of boards was generated with the following command:

    $ tools/qconfig.py -f SPL SPL_FS_FAT ~SPL_MMC ~SPL_BLK_FS ~SPL_SATA \
                          ~SPL_USB_STORAGE ~ENV_IS_IN_FAT ~EFI

LIBDISK was left enabled for the am* boards, since it seems to result in
actual size reduction, indicating that partitions are being used for
something.

Signed-off-by: Sean Anderson <seanga2 at gmail.com>
---

(no changes since v1)

 configs/am335x_evm_spiboot_defconfig      | 2 +-
 configs/am65x_evm_r5_usbdfu_defconfig     | 1 -
 configs/xilinx_zynqmp_mini_qspi_defconfig | 3 +++
 configs/zynq_cse_nand_defconfig           | 3 +++
 configs/zynq_cse_nor_defconfig            | 3 +++
 configs/zynq_cse_qspi_defconfig           | 3 +++
 6 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig
index b5b11fb62c8..fff5265e56a 100644
--- a/configs/am335x_evm_spiboot_defconfig
+++ b/configs/am335x_evm_spiboot_defconfig
@@ -13,6 +13,7 @@ CONFIG_CLOCK_SYNTHESIZER=y
 # CONFIG_OF_LIBFDT_OVERLAY is not set
 # CONFIG_SPL_MMC is not set
 CONFIG_SPL=y
+# CONFIG_SPL_FS_FAT is not set
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_TIMESTAMP=y
@@ -27,7 +28,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 CONFIG_SPL_FIT_IMAGE_TINY=y
 # CONFIG_SPL_FS_EXT4 is not set
-CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_MTD=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_DM_SPI_FLASH=y
diff --git a/configs/am65x_evm_r5_usbdfu_defconfig b/configs/am65x_evm_r5_usbdfu_defconfig
index f610b2dd94e..6b0bb120d10 100644
--- a/configs/am65x_evm_r5_usbdfu_defconfig
+++ b/configs/am65x_evm_r5_usbdfu_defconfig
@@ -21,7 +21,6 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL_SIZE_LIMIT=0x7ec00
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x2000
-CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig
index a1adfb9e5d1..8b92e1c7358 100644
--- a/configs/xilinx_zynqmp_mini_qspi_defconfig
+++ b/configs/xilinx_zynqmp_mini_qspi_defconfig
@@ -11,6 +11,8 @@ CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi"
 CONFIG_SPL_STACK=0xfffffffc
 CONFIG_SPL=y
+# CONFIG_SPL_FS_FAT is not set
+# CONFIG_SPL_LIBDISK_SUPPORT is not set
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_ZYNQMP_NO_DDR=y
 # CONFIG_PSCI_RESET is not set
@@ -89,6 +91,7 @@ CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_ARM_DCC=y
 CONFIG_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
+CONFIG_FS_FAT=y
 # CONFIG_FAT_WRITE is not set
 CONFIG_PANIC_HANG=y
 # CONFIG_GZIP is not set
diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig
index 19f653f40d0..01f5c090d5e 100644
--- a/configs/zynq_cse_nand_defconfig
+++ b/configs/zynq_cse_nand_defconfig
@@ -13,6 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynq-cse-nand"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL_STACK=0xfffffe00
 CONFIG_SPL=y
+# CONFIG_SPL_FS_FAT is not set
+# CONFIG_SPL_LIBDISK_SUPPORT is not set
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
@@ -78,6 +80,7 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ZYNQ=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_ARM_DCC=y
+CONFIG_FS_FAT=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
 # CONFIG_GZIP is not set
 # CONFIG_LMB is not set
diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig
index 64df1f0b83e..7b32ffd3501 100644
--- a/configs/zynq_cse_nor_defconfig
+++ b/configs/zynq_cse_nor_defconfig
@@ -13,6 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynq-cse-nor"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL_STACK=0xfffffe00
 CONFIG_SPL=y
+# CONFIG_SPL_FS_FAT is not set
+# CONFIG_SPL_LIBDISK_SUPPORT is not set
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
@@ -81,6 +83,7 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_SYS_FLASH_QUIET_TEST=y
 CONFIG_ARM_DCC=y
+CONFIG_FS_FAT=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
 # CONFIG_GZIP is not set
 # CONFIG_LMB is not set
diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig
index 9368fb4ffbc..b4561c50e9a 100644
--- a/configs/zynq_cse_qspi_defconfig
+++ b/configs/zynq_cse_qspi_defconfig
@@ -16,6 +16,8 @@ CONFIG_SPL_STACK=0xfffffe00
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0x0
 CONFIG_DEBUG_UART_CLOCK=0
+# CONFIG_SPL_FS_FAT is not set
+# CONFIG_SPL_LIBDISK_SUPPORT is not set
 # CONFIG_ZYNQ_DDRC_INIT is not set
 # CONFIG_CMD_ZYNQ is not set
 CONFIG_SYS_LOAD_ADDR=0x0
@@ -90,6 +92,7 @@ CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_QSPI=y
+CONFIG_FS_FAT=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
 # CONFIG_GZIP is not set
 # CONFIG_LMB is not set
-- 
2.37.1



More information about the U-Boot mailing list