[PATCH] rockchip: rk3588-rock-5b: Enable CONFIG_PCI_INIT_R to support EFI networking

[Jonas Karlman]

Hi Martin,

On 2023-11-04 14:04, Martin Roukala (né Peres) wrote:
> When u-boot chainloads an EFI bootloader such as iPXE, we want to have
> already initialized the PCI subsystem so that network driver is loaded
> and ready to use by the bootloader.

This change slows down boot from emmc/sd-card where scanning for pci
devices typically is unnecessary.

If pci must be initialized and scanned before an EFI app is started to
find pci network controllers, then pci should probably be initialized by
the efi bootmeth, not by enabling CONFIG_PCI_INIT_R for a single board.

Regards,
Jonas

> 
> Fixes: 191ece249a96 ("rockchip: rk3588-rock-5b: Enable support for PCIe SATA cards")
> Signed-off-by: Martin Roukala (né Peres) <martin.roukala at mupuf.org>
> ---
>  configs/rock5b-rk3588_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
> index 0595325e81..938137c851 100644
> --- a/configs/rock5b-rk3588_defconfig
> +++ b/configs/rock5b-rk3588_defconfig
> @@ -36,6 +36,7 @@ CONFIG_OF_BOARD_SETUP=y
>  CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-rock-5b.dtb"
>  # CONFIG_DISPLAY_CPUINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_PCI_INIT_R=y
>  CONFIG_SPL_MAX_SIZE=0x40000
>  CONFIG_SPL_PAD_TO=0x7f8000
>  CONFIG_SPL_HAS_BSS_LINKER_SECTION=y