[RESEND PATCH v10 7/9] efi_loader: support boot from URI device path
Masahisa Kojima
masahisa.kojima at linaro.org
Wed Nov 8 09:51:18 CET 2023
Hi Ilias,
On Wed, 8 Nov 2023 at 17:02, Ilias Apalodimas
<ilias.apalodimas at linaro.org> wrote:
>
> Kojima-san
>
> [...]
> > > > + * @dev: pointer to the UCLASS_BLK or UCLASS_PARTITION udevice
> > > > + * @dp: pointer to default file device path
> > > > + * Return: status code
> > > > + */
> > > > +static efi_status_t search_default_file(struct udevice *dev,
> > > > + struct efi_device_path **dp)
> > > > +{
> > > > + efi_status_t ret;
> > > > + efi_handle_t handle;
> > > > + u16 *default_file_name = NULL;
> > > > + struct efi_file_handle *root, *f;
> > > > + struct efi_device_path *full_path;
> > > > + struct efi_device_path *device_path;
> > > > + struct efi_device_path *file_path = NULL;
> > > > + struct efi_simple_file_system_protocol *file_system;
> > > > +
> > > > + if (dev_tag_get_ptr(dev, DM_TAG_EFI, (void **)&handle)) {
> > > > + log_warning("DM_TAG_EFI not found\n");
> > > > + return EFI_INVALID_PARAMETER;
> > > > + }
> > > > +
> > > > + ret = EFI_CALL(bs->open_protocol(handle, &efi_simple_file_system_protocol_guid,
> > > > + (void **)&file_system, efi_root, NULL,
> > > > + EFI_OPEN_PROTOCOL_GET_PROTOCOL));
> > > > + if (ret != EFI_SUCCESS)
> > > > + return ret;
> > > > +
> > > > + ret = EFI_CALL(file_system->open_volume(file_system, &root));
> > > > + if (ret != EFI_SUCCESS)
> > > > + return ret;
> > > > +
> > > > + file_path = efi_dp_from_file(NULL, "/EFI/BOOT/" BOOTEFI_NAME);
> > > > + default_file_name = efi_dp_str(file_path);
> > > > + if (!default_file_name) {
> > > > + ret = EFI_OUT_OF_RESOURCES;
> > > > + goto err;
> > > > + }
> > > > +
> > > > + ret = EFI_CALL(root->open(root, &f, default_file_name,
> > > > + EFI_FILE_MODE_READ, 0));
> > > > + efi_free_pool(default_file_name);
> > > > + if (ret != EFI_SUCCESS)
> > > > + goto err;
> > > > +
> > > > + EFI_CALL(f->close(f));
> > > > +
> > > > + ret = EFI_CALL(bs->open_protocol(handle, &efi_guid_device_path,
> > > > + (void **)&device_path, efi_root, NULL,
> > > > + EFI_OPEN_PROTOCOL_GET_PROTOCOL));
> > > > + if (ret != EFI_SUCCESS)
> > > > + goto err;
> > > > +
> > > > + full_path = efi_dp_append(device_path, file_path);
> > > > + if (!full_path) {
> > > > + ret = EFI_OUT_OF_RESOURCES;
> > > > + goto err;
> > > > + }
> > > > +
> > > > + *dp = full_path;
> > > > +err:
> > > > + efi_free_pool(file_path);
> > > > +
> > > > + return ret;
> > > > +}
> > >
> > > We discussed this offline, adding it here for completeness.
> > > What is happening here, is that we are mounting the blkmap disk and
> > > try to search boot options on the fly.
> > > Since u-boot will scan all boot options once a disk is probed, the
> > > boot option you are trying to find is already added in the EFI
> > > bootmgr. I think it's going to be easier to search for that specific
> > > boot option instead of re-scanning for it on the fly.
> >
> > I'm now trying to implement loading a default file
> > from the auto-generated boot option, I would like to consult with you.
> >
> > My v9 implementation to load the default file
> > from blkmap device is as follows.
> >
> > /**
> > * try_load_default_file() - try to load the default file
> > *
> > * Search the device having EFI_SIMPLE_FILE_SYSTEM_PROTOCOL,
> > * then try to load with the default boot file(e.g. EFI/BOOT/BOOTAA64.EFI).
> > *
> > * @dev pointer to the UCLASS_BLK or
> > UCLASS_PARTITION udevice
> > * @image_handle: pointer to handle for newly installed image
> > * Return: status code
> > */
> > static efi_status_t try_load_default_file(struct udevice *dev,
> > efi_handle_t *image_handle)
> > {
> > efi_status_t ret;
> > efi_handle_t handle;
> > struct efi_handler *handler;
> > struct efi_device_path *file_path;
> > struct efi_device_path *device_path;
> >
> > if (dev_tag_get_ptr(dev, DM_TAG_EFI, (void **)&handle)) {
> > log_warning("DM_TAG_EFI not found\n");
> > return EFI_INVALID_PARAMETER;
> > }
> >
> > ret = efi_search_protocol(handle,
> >
> > &efi_simple_file_system_protocol_guid, &handler);
> > if (ret != EFI_SUCCESS)
> > return ret;
> >
> > ret = EFI_CALL(bs->open_protocol(handle, &efi_guid_device_path,
> > (void **)&device_path, efi_root, NULL,
> > EFI_OPEN_PROTOCOL_GET_PROTOCOL));
> > if (ret != EFI_SUCCESS)
> > return ret;
> >
> > file_path = expand_media_path(device_path);
> > ret = EFI_CALL(efi_load_image(true, efi_root, file_path, NULL, 0,
> > image_handle));
> > efi_free_pool(file_path);
> >
> > return ret;
> > }
> >
> > Note that try_load_default_file() is repeatedly called
> > with all child partition devices until it succeeds.
> >
> > If we try to load the default file from the auto-generated boot option,
> > we probably need to do the following steps.
> > - search all auto-generated boot option
> > - deserialize the boot option
> > - check the boot option has device_path points to the blkmap
> > blk/partition device
> > - call expand_media_path() with the device_path of the boot option
> >
> > Since we already have the devive_path of the blk/partition devices,
> > I think it is simple we just call expand_media_path() with these device_path
> > instead of searching for the boot option.
> >
> > What do you think?
>
> Fair enough,
> Can we then replace the open coded file_path = efi_dp_from_file(NULL,
> "/EFI/BOOT/" BOOTEFI_NAME); etc with expand_media_path?
> That function already search for the
> efi_simple_file_system_protocol_guid and we should avoid code
> duplication
OK, I will remove the code duplication.
I will also remove global variables, then send an updated version.
Thanks,
Masahisa Kojima
>
> Thanks
> /Ilias
>
>
> >
> > Thanks,
> > Masahisa Kojima
> >
> > >
> > > Thanks
> > > /Ilias
> > >
> > >
> > >
> > > > +
> > > > +/**
> > > > + * check_disk_has_default_file() - load the default file
> > > > + *
> > > > + * @blk: pointer to the UCLASS_BLK udevice
> > > > + * @dp: pointer to default file device path
> > > > + * Return: status code
> > > > + */
> > > > +static efi_status_t check_disk_has_default_file(struct udevice *blk,
> > > > + struct efi_device_path **dp)
> > > > +{
> > > > + efi_status_t ret;
> > > > + struct udevice *partition;
> > > > +
> > > > + /* image that has no partition table but a file system */
> > > > + ret = search_default_file(blk, dp);
> > > > + if (ret == EFI_SUCCESS)
> > > > + return ret;
> > > > +
> > > > + /* try the partitions */
> > > > + device_foreach_child(partition, blk) {
> > > > + enum uclass_id id;
> > > > +
> > > > + id = device_get_uclass_id(partition);
> > > > + if (id != UCLASS_PARTITION)
> > > > + continue;
> > > > +
> > > > + ret = search_default_file(partition, dp);
> > > > + if (ret == EFI_SUCCESS)
> > > > + return ret;
> > > > + }
> > > > +
> > > > + return EFI_NOT_FOUND;
> > > > +}
> > > > +
> > > > +/**
> > > > + * prepare_loaded_image() - prepare ramdisk for downloaded image
> > > > + *
> > > > + * @label: label of load option
> > > > + * @addr: image address
> > > > + * @size: image size
> > > > + * @dp: pointer to default file device path
> > > > + * Return: status code
> > > > + */
> > > > +static efi_status_t prepare_loaded_image(u16 *label, ulong addr, ulong size,
> > > > + struct efi_device_path **dp)
> > > > +{
> > > > + efi_status_t ret;
> > > > + struct udevice *blk;
> > > > +
> > > > + blk = mount_image(label, addr, size);
> > > > + if (!blk)
> > > > + return EFI_LOAD_ERROR;
> > > > +
> > > > + ret = check_disk_has_default_file(blk, dp);
> > > > + if (ret != EFI_SUCCESS) {
> > > > + log_info("Cannot boot from downloaded image\n");
> > > > + goto err;
> > > > + }
> > > > +
> > > > + /*
> > > > + * TODO: expose the ramdisk to OS.
> > > > + * Need to pass the ramdisk information by the architecture-specific
> > > > + * methods such as 'pmem' device-tree node.
> > > > + */
> > > > + ret = efi_add_memory_map(addr, size, EFI_RESERVED_MEMORY_TYPE);
> > > > + if (ret != EFI_SUCCESS) {
> > > > + log_err("Memory reservation failed\n");
> > > > + goto err;
> > > > + }
> > > > +
> > > > + ramdisk_blk_dev = blk;
> > > > +
> > > > + return EFI_SUCCESS;
> > > > +
> > > > +err:
> > > > + if (blkmap_destroy(blk->parent))
> > > > + log_err("Destroying blkmap failed\n");
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +/**
> > > > + * efi_bootmgr_release_uridp_resource() - cleanup uri device path resource
> > > > + *
> > > > + * Return: status code
> > > > + */
> > > > +efi_status_t efi_bootmgr_release_uridp_resource(void)
> > > > +{
> > > > + efi_status_t ret = EFI_SUCCESS;
> > > > +
> > > > + if (ramdisk_blk_dev) {
> > > > + ret = efi_add_memory_map(image_addr, image_size,
> > > > + EFI_CONVENTIONAL_MEMORY);
> > > > + if (ret != EFI_SUCCESS)
> > > > + log_err("Reclaiming memory failed\n");
> > > > +
> > > > + if (blkmap_destroy(ramdisk_blk_dev->parent)) {
> > > > + log_err("Destroying blkmap failed\n");
> > > > + ret = EFI_DEVICE_ERROR;
> > > > + }
> > > > +
> > > > + ramdisk_blk_dev = NULL;
> > > > + }
> > > > +
> > > > + efi_free_pool(loaded_dp);
> > > > + loaded_dp = NULL;
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +/**
> > > > + * efi_bootmgr_image_return_notify() - return to efibootmgr callback
> > > > + *
> > > > + * @event: the event for which this notification function is registered
> > > > + * @context: event context - not used in this function
> > > > + */
> > > > +static void EFIAPI efi_bootmgr_image_return_notify(struct efi_event *event,
> > > > + void *context)
> > > > +{
> > > > + efi_status_t ret;
> > > > +
> > > > + EFI_ENTRY("%p, %p", event, context);
> > > > + ret = efi_bootmgr_release_uridp_resource();
> > > > + EFI_EXIT(ret);
> > > > +}
> > > > +
> > > > +/**
> > > > + * try_load_from_uri_path() - Handle the URI device path
> > > > + *
> > > > + * @uridp: uri device path
> > > > + * @lo_label: label of load option
> > > > + * @handle: pointer to handle for newly installed image
> > > > + * Return: status code
> > > > + */
> > > > +static efi_status_t try_load_from_uri_path(struct efi_device_path_uri *uridp,
> > > > + u16 *lo_label,
> > > > + efi_handle_t *handle)
> > > > +{
> > > > + char *s;
> > > > + int err;
> > > > + int uri_len;
> > > > + efi_status_t ret;
> > > > + void *source_buffer;
> > > > + efi_uintn_t source_size;
> > > > + struct efi_event *event = NULL;
> > > > +
> > > > + loaded_dp = NULL;
> > > > + ramdisk_blk_dev = NULL;
> > > > +
> > > > + s = env_get("loadaddr");
> > > > + if (!s) {
> > > > + log_err("Error: loadaddr is not set\n");
> > > > + return EFI_INVALID_PARAMETER;
> > > > + }
> > > > + image_addr = hextoul(s, NULL);
> > > > + err = wget_with_dns(image_addr, uridp->uri);
> > > > + if (err < 0)
> > > > + return EFI_INVALID_PARAMETER;
> > > > + image_size = env_get_hex("filesize", 0);
> > > > + if (!image_size)
> > > > + return EFI_INVALID_PARAMETER;
> > > > +
> > > > + /*
> > > > + * If the file extension is ".iso" or ".img", mount it and try to load
> > > > + * the default file.
> > > > + * If the file is PE-COFF image, load the downloaded file.
> > > > + */
> > > > + uri_len = strlen(uridp->uri);
> > > > + if (!strncmp(&uridp->uri[uri_len - 4], ".iso", 4) ||
> > > > + !strncmp(&uridp->uri[uri_len - 4], ".img", 4)) {
> > > > + ret = prepare_loaded_image(lo_label, image_addr, image_size, &loaded_dp);
> > > > + if (ret != EFI_SUCCESS)
> > > > + goto err;
> > > > +
> > > > + source_buffer = NULL;
> > > > + source_size = 0;
> > > > + } else if (efi_check_pe((void *)image_addr, image_size, NULL) == EFI_SUCCESS) {
> > > > + efi_handle_t mem_handle = NULL;
> > > > +
> > > > + /*
> > > > + * loaded_dp must exist until efi application returns,
> > > > + * will be freed in return_to_efibootmgr event callback.
> > > > + */
> > > > + loaded_dp = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE,
> > > > + (uintptr_t)image_addr, image_size);
> > > > + ret = efi_install_multiple_protocol_interfaces(
> > > > + &mem_handle, &efi_guid_device_path, loaded_dp, NULL);
> > > > + if (ret != EFI_SUCCESS)
> > > > + goto err;
> > > > +
> > > > + source_buffer = (void *)image_addr;
> > > > + source_size = image_size;
> > > > + } else {
> > > > + log_err("Error: file type is not supported\n");
> > > > + return EFI_UNSUPPORTED;
> > > > + }
> > > > +
> > > > + ret = EFI_CALL(efi_load_image(false, efi_root, loaded_dp, source_buffer,
> > > > + source_size, handle));
> > > > + if (ret != EFI_SUCCESS)
> > > > + goto err;
> > > > +
> > > > + /* create event for cleanup when the image returns or error occurs */
> > > > + ret = efi_create_event(EVT_NOTIFY_SIGNAL, TPL_CALLBACK,
> > > > + efi_bootmgr_image_return_notify, NULL,
> > > > + &efi_guid_event_group_return_to_efibootmgr,
> > > > + &event);
> > > > + if (ret != EFI_SUCCESS) {
> > > > + log_err("Creating event failed\n");
> > > > + goto err;
> > > > + }
> > > > +
> > > > + return ret;
> > > > +
> > > > +err:
> > > > + efi_bootmgr_release_uridp_resource();
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > /**
> > > > * try_load_entry() - try to load image for boot option
> > > > *
> > > > @@ -211,6 +541,13 @@ static efi_status_t try_load_entry(u16 n, efi_handle_t *handle,
> > > > if (EFI_DP_TYPE(lo.file_path, MEDIA_DEVICE, FILE_PATH)) {
> > > > /* file_path doesn't contain a device path */
> > > > ret = try_load_from_short_path(lo.file_path, handle);
> > > > + } else if (EFI_DP_TYPE(lo.file_path, MESSAGING_DEVICE, MSG_URI)) {
> > > > + if (IS_ENABLED(CONFIG_EFI_HTTP_BOOT))
> > > > + ret = try_load_from_uri_path(
> > > > + (struct efi_device_path_uri *)lo.file_path,
> > > > + lo.label, handle);
> > > > + else
> > > > + ret = EFI_LOAD_ERROR;
> > > > } else {
> > > > file_path = expand_media_path(lo.file_path);
> > > > ret = EFI_CALL(efi_load_image(true, efi_root, file_path,
> > > > --
> > > > 2.34.1
> > > >
More information about the U-Boot
mailing list