[PATCH 1/3] board: ti: common: add rtc setup to common folder

[Bryan Brattlof]

On November  7, 2023 thus sayeth Tom Rini:
> On Tue, Nov 07, 2023 at 05:21:41PM -0600, Bryan Brattlof wrote:
> 
> > All of the starter kit boards for the am62xxx extended family utilize
> > the same 32k crystal oscillator for a more accurate clock for the RTC
> > instance. Add the setup the clock mux and debounce configuration to the
> > common board directory so the entire am62xxx extended family can utilize
> > it.
> > 
> > Signed-off-by: Bryan Brattlof <bb at ti.com>
> [snip]
> > diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig
> > index 49edd98014ab7..56a65c0a402bb 100644
> > --- a/board/ti/common/Kconfig
> > +++ b/board/ti/common/Kconfig
> > @@ -1,3 +1,11 @@
> > +config BOARD_HAS_32K_RTC_CRYSTAL
> > +	bool "Enable the 32k crystial for RTC"
> > +	help
> > +	   Some of Texas Instrument's Starter-Kit boards have
> > +	   an onboard 32k crystal. Select this option if you wish Uboot
> > +	   to enable this crystal for Linux
> > +	default n
> 
> No "default n" as that is the default. And we (a) need some depends on
> for what families this is found on and then (b) how, if at all, does
> this match up with the 32k crystal used on other TI reference platforms
> over the years? If this is specific to the K3 families of reference
> platforms, the help needs re-phrasing and the filename is too generic.
> It's also not a "RTC" in terms of something we can talk to via
> drivers/rtc/rtc-uclass.c and drivers/rtc/davinci.c, or in this case
> porting the kernel's drivers/rtc/rtc-ti-k3.c over, yes?
> 
> Oh, and "U-Boot" not "Uboot". Should see if the checkpatch typo list
> can be easily expanded by us, one of these days.

Yeah I'll work on the wording.

We just need to toggle a few bits for Linux to get the crystal muxed 
properly for the RTC driver in Linux.

We also toggle a few bits for the debouce settings that apparently I 
didn't separate out from this series.

Thanks for the quick review though.
~Bryan