[PATCH 2/2] xilinx: zynq: Enable capsule update for Antminer S9

[Michal Simek]

Capsule update helps with easier firmware development that's why enable it
by default to be able to update system without replugging SD card again and
again.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 configs/bitmain_antminer_s9_defconfig | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig
index b8c9afd9cfcd..5c9b97819b14 100644
--- a/configs/bitmain_antminer_s9_defconfig
+++ b/configs/bitmain_antminer_s9_defconfig
@@ -42,7 +42,6 @@ CONFIG_SYS_PBSIZE=2075
 CONFIG_CMD_BOOTZ=y
 CONFIG_SYS_BOOTM_LEN=0x3c00000
 # CONFIG_CMD_ELF is not set
-# CONFIG_CMD_DM is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FPGA_LOADBP=y
 CONFIG_CMD_FPGA_LOADFS=y
@@ -50,6 +49,7 @@ CONFIG_CMD_FPGA_LOADMK=y
 CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_NAND_LOCK_UNLOCK=y
 CONFIG_CMD_PART=y
 # CONFIG_CMD_SETEXPR is not set
@@ -60,11 +60,15 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_PXE=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SPREAD=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FAT=y
 CONFIG_ENV_IS_IN_NAND=y
@@ -74,6 +78,8 @@ CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
 CONFIG_BOOTP_SERVERIP=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_DFU_TIMEOUT=y
+CONFIG_DFU_MMC=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_MMC_SDHCI=y
@@ -93,4 +99,6 @@ CONFIG_ZYNQ_SERIAL=y
 CONFIG_WDT=y
 CONFIG_WDT_CDNS=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+CONFIG_TOOLS_MKEFICAPSULE=y
-- 
2.36.1