[PATCH 4/4] arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes

[Dhruva Gole]

On Nov 13, 2023 at 08:59:19 -0600, Nishanth Menon wrote:
> Kernel dts import now provides bootph-all and bootph-pre-ram properties
> for the properties we have been overriding so far. Drop the same.
> 
> While at this enable the DM and tifs uarts for programming pinmux

s/tifs/TIFS UARTs

> since they are marked reserved by board.dts
> 
> Signed-off-by: Nishanth Menon <nm at ti.com>
> ---
>  arch/arm/dts/k3-am625-r5-sk.dts      | 12 +---
>  arch/arm/dts/k3-am625-sk-u-boot.dtsi | 92 ----------------------------
>  2 files changed, 2 insertions(+), 102 deletions(-)
> 
> diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts
> index 55420b2f2c15..6b9f40e55581 100644
> --- a/arch/arm/dts/k3-am625-r5-sk.dts
> +++ b/arch/arm/dts/k3-am625-r5-sk.dts
> @@ -69,22 +69,14 @@
>  	};
>  };
>  
> -&wkup_uart0_pins_default {
> -	bootph-pre-ram;
> -};
> -
> -&main_uart1_pins_default {
> -	bootph-pre-ram;
> -};
> -
>  /* WKUP UART0 is used for DM firmware logs */
>  &wkup_uart0 {
> -	bootph-pre-ram;
> +	status = "okay";
>  };
>  
>  /* Main UART1 is used for TIFS firmware logs */
>  &main_uart1 {
> -	bootph-pre-ram;
> +	status = "okay";
>  };
>  
>  &ospi0 {
> diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
> index dcf7c7652d31..fa778b0ff4c1 100644
> --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
> @@ -8,71 +8,14 @@
>  
>  / {
>  	chosen {
> -		stdout-path = "serial2:115200n8";
>  		tick-timer = &main_timer0;
>  	};
> -
> -	aliases {
> -		mmc1 = &sdhci1;
> -	};
> -
> -	memory at 80000000 {
> -		bootph-all;
> -	};
> -};
> -
> -&main_conf {
> -	bootph-all;
>  };
>  
>  &main_timer0 {
>  	clock-frequency = <25000000>;
>  };
>  
> -&main_uart0 {
> -	bootph-all;
> -};
> -
> -&main_uart0_pins_default {
> -	bootph-all;
> -};
> -
> -&sdhci1 {
> -	bootph-all;
> -};
> -
> -&main_mmc1_pins_default {
> -	bootph-all;
> -};
> -
> -&fss {
> -	bootph-all;
> -};
> -
> -&ospi0_pins_default {
> -	bootph-all;
> -};
> -
> -&ospi0 {
> -	bootph-all;
> -
> -	flash at 0 {
> -		bootph-all;
> -
> -		partitions {
> -			bootph-all;
> -
> -			partition at 3fc0000 {
> -				bootph-all;
> -			};
> -		};
> -	};
> -};
> -
> -&inta_main_dmss {
> -	bootph-all;
> -};
> -
>  &main_bcdma {
>  	reg = <0x00 0x485c0100 0x00 0x100>,
>  	      <0x00 0x4c000000 0x00 0x20000>,
> @@ -100,41 +43,6 @@
>  	bootph-all;
>  };
>  
> -&cpsw3g_mdio {
> -	bootph-all;
> -};
> -
> -&cpsw3g_phy0 {
> -	bootph-all;
> -};
> -
> -&cpsw3g_phy1 {
> -	bootph-all;
> -};
> -
> -&main_rgmii1_pins_default {
> -	bootph-all;
> -};
> -
> -&main_rgmii2_pins_default {
> -	bootph-all;
> -};
> -
> -&phy_gmii_sel {
> -	bootph-all;
> -};
> -
> -&cpsw3g {
> -	bootph-all;
> -	ethernet-ports {
> -		bootph-all;
> -	};
> -};
> -
> -&cpsw_port1 {
> -	bootph-all;
> -};
> -
>  &cpsw_port2 {
>  	status = "disabled";
>  };
> -- 
> 2.40.0

Looks okay,

Reviewed-by: Dhruva Gole <d-gole at ti.com>

> 
> 

-- 
Best regards,
Dhruva Gole <d-gole at ti.com>