[PATCH v2 1/2] cmd: bcb: support various block device interfaces for BCB command
Mattijs Korpershoek
mkorpershoek at baylibre.com
Tue Nov 14 09:12:20 CET 2023
Hi Dmitrii,
Thank you for your patch.
On ven., nov. 10, 2023 at 05:59, Dmitrii Merkurev <dimorinny at google.com> wrote:
> Currently BCB command-line, C APIs and implementation only
> support MMC interface. Extend it to allow various block
> device interfaces.
>
> Signed-off-by: Dmitrii Merkurev <dimorinny at google.com>
> Cc: Eugeniu Rosca <erosca at de.adit-jv.com>
> Cc: Ying-Chun Liu (PaulLiu) <paul.liu at linaro.org>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> Cc: Sean Anderson <sean.anderson at seco.com>
> Cc: Cody Schuffelen <schuffelen at google.com>
I confirm that I can reboot from U-Boot into other modes (like
fastbootd) using the default U-boot environment
Tested-by: Mattijs Korpershoek <mkorpershoek at baylibre.com> # on vim3
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> ---
> cmd/Kconfig | 1 -
> cmd/bcb.c | 70 ++++++++++++++++++++++--------------
> doc/android/bcb.rst | 34 +++++++++---------
> drivers/fastboot/fb_common.c | 2 +-
> include/bcb.h | 5 +--
> 5 files changed, 65 insertions(+), 47 deletions(-)
>
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index df6d71c103..ce2435bbb8 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -981,7 +981,6 @@ config CMD_ADC
>
> config CMD_BCB
> bool "bcb"
> - depends on MMC
> depends on PARTITIONS
> help
> Read/modify/write the fields of Bootloader Control Block, usually
> diff --git a/cmd/bcb.c b/cmd/bcb.c
> index 02d0c70d87..6594ac6439 100644
> --- a/cmd/bcb.c
> +++ b/cmd/bcb.c
> @@ -25,6 +25,7 @@ enum bcb_cmd {
> BCB_CMD_STORE,
> };
>
> +static enum uclass_id bcb_uclass_id = UCLASS_INVALID;
> static int bcb_dev = -1;
> static int bcb_part = -1;
> static struct bootloader_message bcb __aligned(ARCH_DMA_MINALIGN) = { { 0 } };
> @@ -53,6 +54,9 @@ static int bcb_is_misused(int argc, char *const argv[])
>
> switch (cmd) {
> case BCB_CMD_LOAD:
> + if (argc != 3 && argc != 4)
> + goto err;
> + break;
> case BCB_CMD_FIELD_SET:
> if (argc != 3)
> goto err;
> @@ -115,7 +119,7 @@ static int bcb_field_get(char *name, char **fieldp, int *sizep)
> return 0;
> }
>
> -static int __bcb_load(int devnum, const char *partp)
> +static int __bcb_load(const char *iface, int devnum, const char *partp)
> {
> struct blk_desc *desc;
> struct disk_partition info;
> @@ -123,14 +127,14 @@ static int __bcb_load(int devnum, const char *partp)
> char *endp;
> int part, ret;
>
> - desc = blk_get_devnum_by_uclass_id(UCLASS_MMC, devnum);
> + desc = blk_get_dev(iface, devnum);
> if (!desc) {
> ret = -ENODEV;
> goto err_read_fail;
> }
>
> /*
> - * always select the USER mmc hwpart in case another
> + * always select the first hwpart in case another
> * blk operation selected a different hwpart
> */
> ret = blk_dselect_hwpart(desc, 0);
> @@ -161,18 +165,20 @@ static int __bcb_load(int devnum, const char *partp)
> goto err_read_fail;
> }
>
> + bcb_uclass_id = desc->uclass_id;
> bcb_dev = desc->devnum;
> bcb_part = part;
> - debug("%s: Loaded from mmc %d:%d\n", __func__, bcb_dev, bcb_part);
> + debug("%s: Loaded from %s %d:%d\n", __func__, iface, bcb_dev, bcb_part);
>
> return CMD_RET_SUCCESS;
> err_read_fail:
> - printf("Error: mmc %d:%s read failed (%d)\n", devnum, partp, ret);
> + printf("Error: %s %d:%s read failed (%d)\n", iface, devnum, partp, ret);
> goto err;
> err_too_small:
> - printf("Error: mmc %d:%s too small!", devnum, partp);
> + printf("Error: %s %d:%s too small!", iface, devnum, partp);
> goto err;
> err:
> + bcb_uclass_id = UCLASS_INVALID;
> bcb_dev = -1;
> bcb_part = -1;
>
> @@ -182,15 +188,23 @@ err:
> static int do_bcb_load(struct cmd_tbl *cmdtp, int flag, int argc,
> char * const argv[])
> {
> + int devnum;
> char *endp;
> - int devnum = simple_strtoul(argv[1], &endp, 0);
> + char *iface = "mmc";
> +
> + if (argc == 4) {
> + iface = argv[1];
> + argc--;
> + argv++;
> + }
>
> + devnum = simple_strtoul(argv[1], &endp, 0);
> if (*endp != '\0') {
> printf("Error: Device id '%s' not a number\n", argv[1]);
> return CMD_RET_FAILURE;
> }
>
> - return __bcb_load(devnum, argv[2]);
> + return __bcb_load(iface, devnum, argv[2]);
> }
>
> static int __bcb_set(char *fieldp, const char *valp)
> @@ -298,7 +312,7 @@ static int __bcb_store(void)
> u64 cnt;
> int ret;
>
> - desc = blk_get_devnum_by_uclass_id(UCLASS_MMC, bcb_dev);
> + desc = blk_get_devnum_by_uclass_id(bcb_uclass_id, bcb_dev);
> if (!desc) {
> ret = -ENODEV;
> goto err;
> @@ -317,7 +331,7 @@ static int __bcb_store(void)
>
> return CMD_RET_SUCCESS;
> err:
> - printf("Error: mmc %d:%d write failed (%d)\n", bcb_dev, bcb_part, ret);
> + printf("Error: %d %d:%d write failed (%d)\n", bcb_uclass_id, bcb_dev, bcb_part, ret);
>
> return CMD_RET_FAILURE;
> }
> @@ -328,11 +342,11 @@ static int do_bcb_store(struct cmd_tbl *cmdtp, int flag, int argc,
> return __bcb_store();
> }
>
> -int bcb_write_reboot_reason(int devnum, char *partp, const char *reasonp)
> +int bcb_write_reboot_reason(const char *iface, int devnum, char *partp, const char *reasonp)
> {
> int ret;
>
> - ret = __bcb_load(devnum, partp);
> + ret = __bcb_load(iface, devnum, partp);
> if (ret != CMD_RET_SUCCESS)
> return ret;
>
> @@ -385,21 +399,23 @@ static int do_bcb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
> U_BOOT_CMD(
> bcb, CONFIG_SYS_MAXARGS, 1, do_bcb,
> "Load/set/clear/test/dump/store Android BCB fields",
> - "load <dev> <part> - load BCB from mmc <dev>:<part>\n"
> - "bcb set <field> <val> - set BCB <field> to <val>\n"
> - "bcb clear [<field>] - clear BCB <field> or all fields\n"
> - "bcb test <field> <op> <val> - test BCB <field> against <val>\n"
> - "bcb dump <field> - dump BCB <field>\n"
> - "bcb store - store BCB back to mmc\n"
> + "load <interface> <dev> <part> - load BCB from <interface> <dev>:<part>\n"
> + "load <dev> <part> - load BCB from mmc <dev>:<part>\n"
> + "bcb set <field> <val> - set BCB <field> to <val>\n"
> + "bcb clear [<field>] - clear BCB <field> or all fields\n"
> + "bcb test <field> <op> <val> - test BCB <field> against <val>\n"
> + "bcb dump <field> - dump BCB <field>\n"
> + "bcb store - store BCB back to <interface>\n"
> "\n"
> "Legend:\n"
> - "<dev> - MMC device index containing the BCB partition\n"
> - "<part> - MMC partition index or name containing the BCB\n"
> - "<field> - one of {command,status,recovery,stage,reserved}\n"
> - "<op> - the binary operator used in 'bcb test':\n"
> - " '=' returns true if <val> matches the string stored in <field>\n"
> - " '~' returns true if <val> matches a subset of <field>'s string\n"
> - "<val> - string/text provided as input to bcb {set,test}\n"
> - " NOTE: any ':' character in <val> will be replaced by line feed\n"
> - " during 'bcb set' and used as separator by upper layers\n"
> + "<interface> - storage device interface (virtio, mmc, etc)\n"
> + "<dev> - storage device index containing the BCB partition\n"
> + "<part> - partition index or name containing the BCB\n"
> + "<field> - one of {command,status,recovery,stage,reserved}\n"
> + "<op> - the binary operator used in 'bcb test':\n"
> + " '=' returns true if <val> matches the string stored in <field>\n"
> + " '~' returns true if <val> matches a subset of <field>'s string\n"
> + "<val> - string/text provided as input to bcb {set,test}\n"
> + " NOTE: any ':' character in <val> will be replaced by line feed\n"
> + " during 'bcb set' and used as separator by upper layers\n"
> );
> diff --git a/doc/android/bcb.rst b/doc/android/bcb.rst
> index 8861608300..2226517d39 100644
> --- a/doc/android/bcb.rst
> +++ b/doc/android/bcb.rst
> @@ -41,23 +41,25 @@ requirements enumerated above. Below is the command's help message::
> bcb - Load/set/clear/test/dump/store Android BCB fields
>
> Usage:
> - bcb load <dev> <part> - load BCB from mmc <dev>:<part>
> - bcb set <field> <val> - set BCB <field> to <val>
> - bcb clear [<field>] - clear BCB <field> or all fields
> - bcb test <field> <op> <val> - test BCB <field> against <val>
> - bcb dump <field> - dump BCB <field>
> - bcb store - store BCB back to mmc
> + bcb load <interface> <dev> <part> - load BCB from <interface> <dev>:<part>
> + load <dev> <part> - load BCB from mmc <dev>:<part>
> + bcb set <field> <val> - set BCB <field> to <val>
> + bcb clear [<field>] - clear BCB <field> or all fields
> + bcb test <field> <op> <val> - test BCB <field> against <val>
> + bcb dump <field> - dump BCB <field>
> + bcb store - store BCB back to <interface>
>
> Legend:
> - <dev> - MMC device index containing the BCB partition
> - <part> - MMC partition index or name containing the BCB
> - <field> - one of {command,status,recovery,stage,reserved}
> - <op> - the binary operator used in 'bcb test':
> - '=' returns true if <val> matches the string stored in <field>
> - '~' returns true if <val> matches a subset of <field>'s string
> - <val> - string/text provided as input to bcb {set,test}
> - NOTE: any ':' character in <val> will be replaced by line feed
> - during 'bcb set' and used as separator by upper layers
> + <interface> - storage device interface (virtio, mmc, etc)
> + <dev> - storage device index containing the BCB partition
> + <part> - partition index or name containing the BCB
> + <field> - one of {command,status,recovery,stage,reserved}
> + <op> - the binary operator used in 'bcb test':
> + '=' returns true if <val> matches the string stored in <field>
> + '~' returns true if <val> matches a subset of <field>'s string
> + <val> - string/text provided as input to bcb {set,test}
> + NOTE: any ':' character in <val> will be replaced by line feed
> + during 'bcb set' and used as separator by upper layers
>
>
> 'bcb'. Example of getting reboot reason
> @@ -91,7 +93,7 @@ The following Kconfig options must be enabled::
>
> CONFIG_PARTITIONS=y
> CONFIG_MMC=y
> - CONFIG_BCB=y
> + CONFIG_CMD_BCB=y
>
> .. [1] https://android.googlesource.com/platform/bootable/recovery
> .. [2] https://source.android.com/devices/bootloader
> diff --git a/drivers/fastboot/fb_common.c b/drivers/fastboot/fb_common.c
> index 4e9d9b719c..2a6608b28c 100644
> --- a/drivers/fastboot/fb_common.c
> +++ b/drivers/fastboot/fb_common.c
> @@ -105,7 +105,7 @@ int __weak fastboot_set_reboot_flag(enum fastboot_reboot_reason reason)
> if (reason >= FASTBOOT_REBOOT_REASONS_COUNT)
> return -EINVAL;
>
> - return bcb_write_reboot_reason(mmc_dev, "misc", boot_cmds[reason]);
> + return bcb_write_reboot_reason("mmc", mmc_dev, "misc", boot_cmds[reason]);
> }
>
> /**
> diff --git a/include/bcb.h b/include/bcb.h
> index 5edb17aa47..a6326523c4 100644
> --- a/include/bcb.h
> +++ b/include/bcb.h
> @@ -9,10 +9,11 @@
> #define __BCB_H__
>
> #if IS_ENABLED(CONFIG_CMD_BCB)
> -int bcb_write_reboot_reason(int devnum, char *partp, const char *reasonp);
> +int bcb_write_reboot_reason(const char *iface, int devnum, char *partp, const char *reasonp);
> #else
> #include <linux/errno.h>
> -static inline int bcb_write_reboot_reason(int devnum, char *partp, const char *reasonp)
> +static inline int bcb_write_reboot_reason(const char *iface, int devnum,
> + char *partp, const char *reasonp)
> {
> return -EOPNOTSUPP;
> }
> --
> 2.43.0.rc0.421.g78406f8d94-goog
More information about the U-Boot
mailing list