[PATCH v2 2/4] configs: arbel: Enable full functions

[Jim Liu]

Enable more functions/commands for arbel evb.

Signed-off-by: Jim Liu <JJLIU0 at nuvoton.com>
---
Changes for v2:
   --- no change
---
 configs/arbel_evb_defconfig | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/configs/arbel_evb_defconfig b/configs/arbel_evb_defconfig
index 6cfb5a7d32..e2714d1e1a 100644
--- a/configs/arbel_evb_defconfig
+++ b/configs/arbel_evb_defconfig
@@ -4,6 +4,8 @@ CONFIG_TEXT_BASE=0x06208000
 CONFIG_SYS_MALLOC_LEN=0x240000
 CONFIG_SYS_MALLOC_F_LEN=0x1000
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x06208000
 CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x3C0000
 CONFIG_ENV_SECT_SIZE=0x1000
@@ -19,10 +21,12 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run common_bootargs; run romboot"
+CONFIG_LAST_STAGE_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot>"
 CONFIG_SYS_MAXARGS=32
 CONFIG_SYS_BOOTM_LEN=0x1400000
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
@@ -31,6 +35,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -39,6 +44,7 @@ CONFIG_CMD_RNG=y
 CONFIG_CMD_UUID=y
 CONFIG_CMD_HASH=y
 CONFIG_CMD_TPM=y
+CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
@@ -49,6 +55,7 @@ CONFIG_NPCM_AES=y
 CONFIG_NPCM_SHA=y
 CONFIG_NPCM_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_NPCM=y
 # CONFIG_INPUT is not set
 CONFIG_MISC=y
 CONFIG_NPCM_HOST=y
@@ -87,12 +94,17 @@ CONFIG_TPM2_FTPM_TEE=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_NPCM=y
-CONFIG_USB_EHCI_GENERIC=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_GENERIC=y
 CONFIG_USB_OHCI_NPCM=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Nuvoton"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0416
+CONFIG_USB_GADGET_PRODUCT_NUM=0xffff
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_LIB_HW_RAND=y
 CONFIG_TPM=y
 CONFIG_SHA_HW_ACCEL=y
 # CONFIG_EFI_LOADER is not set
+CONFIG_SYS_SKIP_UART_INIT=y
-- 
2.25.1