[PATCH v3] clk: nuvoton: add read only feature for clk driver

Jim Liu jim.t90615 at gmail.com
Tue Nov 14 10:00:04 CET 2023


Add a flag to set ahb/apb/fiu/spi clock divider as read-only
The spi clock setting is related to booting flash, it is setup by early
bootloader.
It just protects the clock source and can't modify it in uboot.

Signed-off-by: Jim Liu <JJLIU0 at nuvoton.com>
---
Changes for v3:
   - add commit message
Changes for v2:
   - add commit message
---
 drivers/clk/nuvoton/clk_npcm.c    | 15 ++++++++++++---
 drivers/clk/nuvoton/clk_npcm.h    |  1 +
 drivers/clk/nuvoton/clk_npcm8xx.c | 12 ++++++------
 3 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/nuvoton/clk_npcm.c b/drivers/clk/nuvoton/clk_npcm.c
index 8d71f2a24b..18cb9cddbf 100644
--- a/drivers/clk/nuvoton/clk_npcm.c
+++ b/drivers/clk/nuvoton/clk_npcm.c
@@ -135,7 +135,7 @@ static u32 npcm_clk_get_div(struct clk *clk)
 	return div;
 }
 
-static u32 npcm_clk_set_div(struct clk *clk, u32 div)
+static int npcm_clk_set_div(struct clk *clk, u32 div)
 {
 	struct npcm_clk_priv *priv = dev_get_priv(clk->dev);
 	struct npcm_clk_div *divider;
@@ -145,6 +145,9 @@ static u32 npcm_clk_set_div(struct clk *clk, u32 div)
 	if (!divider)
 		return -EINVAL;
 
+	if (divider->flags & DIV_RO)
+		return 0;
+
 	if (divider->flags & PRE_DIV2)
 		div = div >> 1;
 
@@ -153,6 +156,12 @@ static u32 npcm_clk_set_div(struct clk *clk, u32 div)
 	else
 		clkdiv = ilog2(div);
 
+	if (clkdiv > (divider->mask >> (ffs(divider->mask) - 1))) {
+		printf("clkdiv(%d) for clk(%ld) is over limit\n",
+		       clkdiv, clk->id);
+		return -EINVAL;
+	}
+
 	val = readl(priv->base + divider->reg);
 	val &= ~divider->mask;
 	val |= (clkdiv << (ffs(divider->mask) - 1)) & divider->mask;
@@ -253,8 +262,8 @@ static ulong npcm_clk_set_rate(struct clk *clk, ulong rate)
 	if (ret)
 		return ret;
 
-	debug("%s: rate %lu, new rate (%lu / %u)\n", __func__, rate, parent_rate, div);
-	return (parent_rate / div);
+	debug("%s: rate %lu, new rate %lu\n", __func__, rate, npcm_clk_get_rate(clk));
+	return npcm_clk_get_rate(clk);
 }
 
 static int npcm_clk_set_parent(struct clk *clk, struct clk *parent)
diff --git a/drivers/clk/nuvoton/clk_npcm.h b/drivers/clk/nuvoton/clk_npcm.h
index 06b60dc8b8..b4726d8381 100644
--- a/drivers/clk/nuvoton/clk_npcm.h
+++ b/drivers/clk/nuvoton/clk_npcm.h
@@ -50,6 +50,7 @@
 #define PRE_DIV2	BIT(2)	/* Pre divisor = 2 */
 #define POST_DIV2	BIT(3)	/* Post divisor = 2 */
 #define FIXED_PARENT	BIT(4)	/* clock source is fixed */
+#define DIV_RO		BIT(5)	/* divider is read-only */
 
 /* Parameters of PLL configuration */
 struct npcm_clk_pll {
diff --git a/drivers/clk/nuvoton/clk_npcm8xx.c b/drivers/clk/nuvoton/clk_npcm8xx.c
index 27e3cfcf55..d1b32e3237 100644
--- a/drivers/clk/nuvoton/clk_npcm8xx.c
+++ b/drivers/clk/nuvoton/clk_npcm8xx.c
@@ -45,12 +45,12 @@ static struct npcm_clk_select npcm8xx_clk_selectors[] = {
 };
 
 static struct npcm_clk_div npcm8xx_clk_dividers[] = {
-	{NPCM8XX_CLK_AHB, CLKDIV1, CLK4DIV, DIV_TYPE1 | PRE_DIV2},
-	{NPCM8XX_CLK_APB2, CLKDIV2, APB2CKDIV, DIV_TYPE2},
-	{NPCM8XX_CLK_APB5, CLKDIV2, APB5CKDIV, DIV_TYPE2},
-	{NPCM8XX_CLK_SPI0, CLKDIV3, SPI0CKDIV, DIV_TYPE1},
-	{NPCM8XX_CLK_SPI1, CLKDIV3, SPI1CKDIV, DIV_TYPE1},
-	{NPCM8XX_CLK_SPI3, CLKDIV1, SPI3CKDIV, DIV_TYPE1},
+	{NPCM8XX_CLK_AHB, CLKDIV1, CLK4DIV, DIV_TYPE1 | PRE_DIV2 | DIV_RO},
+	{NPCM8XX_CLK_APB2, CLKDIV2, APB2CKDIV, DIV_TYPE2 | DIV_RO},
+	{NPCM8XX_CLK_APB5, CLKDIV2, APB5CKDIV, DIV_TYPE2 | DIV_RO},
+	{NPCM8XX_CLK_SPI0, CLKDIV3, SPI0CKDIV, DIV_TYPE1 | DIV_RO},
+	{NPCM8XX_CLK_SPI1, CLKDIV3, SPI1CKDIV, DIV_TYPE1 | DIV_RO},
+	{NPCM8XX_CLK_SPI3, CLKDIV1, SPI3CKDIV, DIV_TYPE1 | DIV_RO},
 	{NPCM8XX_CLK_SPIX, CLKDIV3, SPIXCKDIV, DIV_TYPE1},
 	{NPCM8XX_CLK_UART, CLKDIV1, UARTDIV1, DIV_TYPE1},
 	{NPCM8XX_CLK_UART2, CLKDIV3, UARTDIV2, DIV_TYPE1},
-- 
2.25.1



More information about the U-Boot mailing list