[PATCH V2 4/4] arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes

[Nishanth Menon]

Kernel dts import now provides bootph-all and bootph-pre-ram properties
for the properties we have been overriding so far. Drop the same.

While at this enable the DM and TIFS UARTs for programming pinmux
since they are marked reserved by board.dts

Reviewed-by: Dhruva Gole <d-gole at ti.com>
Tested-by: Dhruva Gole <d-gole at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes:
- capitalize TIFS and UART.
- pick up reviewed and tested tags

V1: https://lore.kernel.org/r/20231113145919.1928812-5-nm@ti.com
 arch/arm/dts/k3-am625-r5-sk.dts      | 12 +---
 arch/arm/dts/k3-am625-sk-u-boot.dtsi | 92 ----------------------------
 2 files changed, 2 insertions(+), 102 deletions(-)

diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts
index 55420b2f2c15..6b9f40e55581 100644
--- a/arch/arm/dts/k3-am625-r5-sk.dts
+++ b/arch/arm/dts/k3-am625-r5-sk.dts
@@ -69,22 +69,14 @@
 	};
 };
 
-&wkup_uart0_pins_default {
-	bootph-pre-ram;
-};
-
-&main_uart1_pins_default {
-	bootph-pre-ram;
-};
-
 /* WKUP UART0 is used for DM firmware logs */
 &wkup_uart0 {
-	bootph-pre-ram;
+	status = "okay";
 };
 
 /* Main UART1 is used for TIFS firmware logs */
 &main_uart1 {
-	bootph-pre-ram;
+	status = "okay";
 };
 
 &ospi0 {
diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index dcf7c7652d31..fa778b0ff4c1 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -8,71 +8,14 @@
 
 / {
 	chosen {
-		stdout-path = "serial2:115200n8";
 		tick-timer = &main_timer0;
 	};
-
-	aliases {
-		mmc1 = &sdhci1;
-	};
-
-	memory at 80000000 {
-		bootph-all;
-	};
-};
-
-&main_conf {
-	bootph-all;
 };
 
 &main_timer0 {
 	clock-frequency = <25000000>;
 };
 
-&main_uart0 {
-	bootph-all;
-};
-
-&main_uart0_pins_default {
-	bootph-all;
-};
-
-&sdhci1 {
-	bootph-all;
-};
-
-&main_mmc1_pins_default {
-	bootph-all;
-};
-
-&fss {
-	bootph-all;
-};
-
-&ospi0_pins_default {
-	bootph-all;
-};
-
-&ospi0 {
-	bootph-all;
-
-	flash at 0 {
-		bootph-all;
-
-		partitions {
-			bootph-all;
-
-			partition at 3fc0000 {
-				bootph-all;
-			};
-		};
-	};
-};
-
-&inta_main_dmss {
-	bootph-all;
-};
-
 &main_bcdma {
 	reg = <0x00 0x485c0100 0x00 0x100>,
 	      <0x00 0x4c000000 0x00 0x20000>,
@@ -100,41 +43,6 @@
 	bootph-all;
 };
 
-&cpsw3g_mdio {
-	bootph-all;
-};
-
-&cpsw3g_phy0 {
-	bootph-all;
-};
-
-&cpsw3g_phy1 {
-	bootph-all;
-};
-
-&main_rgmii1_pins_default {
-	bootph-all;
-};
-
-&main_rgmii2_pins_default {
-	bootph-all;
-};
-
-&phy_gmii_sel {
-	bootph-all;
-};
-
-&cpsw3g {
-	bootph-all;
-	ethernet-ports {
-		bootph-all;
-	};
-};
-
-&cpsw_port1 {
-	bootph-all;
-};
-
 &cpsw_port2 {
 	status = "disabled";
 };
-- 
2.40.0