[PATCH] mmc: sdhci-cadence: Add support for Cadence sdmmc v6
KuanLim.Lee
kuanlim.lee at starfivetech.com
Wed Nov 15 04:36:36 CET 2023
Hi Jaehoon,
If there are no more feedback, I will send out version2 patch soon.
On 11/7/23 14:24, Kuan Lim Lee wrote:
>
> Hi Jaehoon,
>
> On 11/1/23 08:20, Jaehoon Chung wrote:
> > From: Jaehoon Chung <jh80.chung at samsung.com> Hi
> >
> > On 10/3/23 16:22, Kuan Lim Lee wrote:
> > > From: Kuan Lim Lee <kuanlim.lee at linux.starfivetech.com>
> > >
> > > Cadence SDMMC v6 controller has a lot of changes on initialize
> > > compared to v4 controller. PHY is needed by v6 controller.
> > >
> > > Signed-off-by: Kuan Lim Lee <kuanlim.lee at starfivetech.com>
> > > Reviewed-by: Alex Soo <yuklin.soo at starfivetech.com>
> > > Reviewed-by: Wei Liang Lim <weiliang.lim at starfivetech.com>
> >
> > I didn't see their Reviewed-by tag in mailing list.
> They are my colleagues who collaborated develop code with me.
> I think I should them in Signed-off-by, and put your name in Reviewed-by
>
> >
> > > ---
> > > drivers/mmc/Kconfig | 13 ++
> > > drivers/mmc/Makefile | 1 +
> > > drivers/mmc/sdhci-cadence.c | 63 ++-----
> > > drivers/mmc/sdhci-cadence.h | 68 +++++++
> > > drivers/mmc/sdhci-cadence6-phy.c | 302
> > > +++++++++++++++++++++++++++++++
> > > 5 files changed, 396 insertions(+), 51 deletions(-) create mode
> > > 100644 drivers/mmc/sdhci-cadence.h create mode 100644
> > > drivers/mmc/sdhci-cadence6-phy.c
> > >
> > > diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index
> > > de01b9687b..cec881d862 100644
> > > --- a/drivers/mmc/Kconfig
> > > +++ b/drivers/mmc/Kconfig
> > > @@ -573,6 +573,19 @@ config MMC_SDHCI_CADENCE
> > >
> > > If unsure, say N.
> > >
> > > +config MMC_SDHCI_CADENCE_V6
> > > + bool "SDHCI support for the Cadence SD/SDIO/eMMC controller &
> > driver version 6"
> > > + depends on BLK && DM_MMC
> > > + depends on MMC_SDHCI
> > > + depends on OF_CONTROL
> > > + select MMC_SDHCI_CADENCE
> > > + help
> > > + This selects the Cadence SD/SDIO/eMMC driver version 6.
> > > +
> > > + If you have a controller with this interface, say Y here.
> > > +
> > > + If unsure, say N.
> > > +
> > > config MMC_SDHCI_AM654
> > > bool "SDHCI Controller on TI's Am654 devices"
> > > depends on ARCH_K3
> > > diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index
> > > 2c65c4765a..cdcce55b8b 100644
> > > --- a/drivers/mmc/Makefile
> > > +++ b/drivers/mmc/Makefile
> > > @@ -61,6 +61,7 @@ obj-$(CONFIG_MMC_SDHCI_ATMEL) +=
> > atmel_sdhci.o
> > > obj-$(CONFIG_MMC_SDHCI_BCM2835) += bcm2835_sdhci.o
> > > obj-$(CONFIG_MMC_SDHCI_BCMSTB) += bcmstb_sdhci.o
> > > obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o
> > > +obj-$(CONFIG_MMC_SDHCI_CADENCE_V6) += sdhci-cadence6-phy.o
> > > obj-$(CONFIG_MMC_SDHCI_AM654) += am654_sdhci.o
> > > obj-$(CONFIG_MMC_SDHCI_IPROC) += iproc_sdhci.o
> > > obj-$(CONFIG_MMC_SDHCI_KONA) += kona_sdhci.o
> > > diff --git a/drivers/mmc/sdhci-cadence.c
> > > b/drivers/mmc/sdhci-cadence.c index 327a05ad11..d7a270e74c 100644
> > > --- a/drivers/mmc/sdhci-cadence.c
> > > +++ b/drivers/mmc/sdhci-cadence.c
> > > @@ -17,56 +17,7 @@
> > > #include <linux/libfdt.h>
> > > #include <mmc.h>
> > > #include <sdhci.h>
> > > -
> > > -/* HRS - Host Register Set (specific to Cadence) */
> > > -#define SDHCI_CDNS_HRS04 0x10 /* PHY access
> port */
> > > -#define SDHCI_CDNS_HRS04_ACK BIT(26)
> > > -#define SDHCI_CDNS_HRS04_RD BIT(25)
> > > -#define SDHCI_CDNS_HRS04_WR BIT(24)
> > > -#define SDHCI_CDNS_HRS04_RDATA GENMASK(23, 16)
> > > -#define SDHCI_CDNS_HRS04_WDATA GENMASK(15, 8)
> > > -#define SDHCI_CDNS_HRS04_ADDR GENMASK(5,
> 0)
> > > -
> > > -#define SDHCI_CDNS_HRS06 0x18 /* eMMC
> control */
> > > -#define SDHCI_CDNS_HRS06_TUNE_UP BIT(15)
> > > -#define SDHCI_CDNS_HRS06_TUNE GENMASK(13,
> 8)
> > > -#define SDHCI_CDNS_HRS06_MODE GENMASK(2,
> 0)
> > > -#define SDHCI_CDNS_HRS06_MODE_SD 0x0
> > > -#define SDHCI_CDNS_HRS06_MODE_MMC_SDR 0x2
> > > -#define SDHCI_CDNS_HRS06_MODE_MMC_DDR 0x3
> > > -#define SDHCI_CDNS_HRS06_MODE_MMC_HS200 0x4
> > > -#define SDHCI_CDNS_HRS06_MODE_MMC_HS400 0x5
> > > -#define SDHCI_CDNS_HRS06_MODE_MMC_HS400ES 0x6
> > > -
> > > -/* SRS - Slot Register Set (SDHCI-compatible) */
> > > -#define SDHCI_CDNS_SRS_BASE 0x200
> > > -
> > > -/* PHY */
> > > -#define SDHCI_CDNS_PHY_DLY_SD_HS 0x00
> > > -#define SDHCI_CDNS_PHY_DLY_SD_DEFAULT 0x01
> > > -#define SDHCI_CDNS_PHY_DLY_UHS_SDR12 0x02
> > > -#define SDHCI_CDNS_PHY_DLY_UHS_SDR25 0x03
> > > -#define SDHCI_CDNS_PHY_DLY_UHS_SDR50 0x04
> > > -#define SDHCI_CDNS_PHY_DLY_UHS_DDR50 0x05
> > > -#define SDHCI_CDNS_PHY_DLY_EMMC_LEGACY 0x06
> > > -#define SDHCI_CDNS_PHY_DLY_EMMC_SDR 0x07
> > > -#define SDHCI_CDNS_PHY_DLY_EMMC_DDR 0x08
> > > -#define SDHCI_CDNS_PHY_DLY_SDCLK 0x0b
> > > -#define SDHCI_CDNS_PHY_DLY_HSMMC 0x0c
> > > -#define SDHCI_CDNS_PHY_DLY_STROBE 0x0d
> > > -
> > > -/*
> > > - * The tuned val register is 6 bit-wide, but not the whole of the
> > > range is
> > > - * available. The range 0-42 seems to be available (then 43 wraps
> > > around to 0)
> > > - * but I am not quite sure if it is official. Use only 0 to 39 for safety.
> > > - */
> > > -#define SDHCI_CDNS_MAX_TUNING_LOOP 40
> > > -
> > > -struct sdhci_cdns_plat {
> > > - struct mmc_config cfg;
> > > - struct mmc mmc;
> > > - void __iomem *hrs_addr;
> > > -};
> > > +#include "sdhci-cadence.h"
> > >
> > > struct sdhci_cdns_phy_cfg {
> > > const char *property;
> > > @@ -112,8 +63,11 @@ static int sdhci_cdns_write_phy_reg(struct
> > > sdhci_cdns_plat *plat, }
> > >
> > > static int sdhci_cdns_phy_init(struct sdhci_cdns_plat *plat,
> > > - const void *fdt, int nodeoffset)
> > > + const void *fdt, int nodeoffset)
> >
> > Is there any reason to touch this?
> I thought the space key is misaligned. I think I better not to touch it.
> >
> >
> > > {
> > > + if (IS_ENABLED(CONFIG_MMC_SDHCI_CADENCE_V6))
> > > + return sdhci_cdns6_phy_init(plat,
> > SDHCI_CDNS_HRS06_MODE_SD);
> > > +
> > > const fdt32_t *prop;
> > > int ret, i;
> > >
> > > @@ -163,6 +117,9 @@ static void sdhci_cdns_set_control_reg(struct
> > sdhci_host *host)
> > > tmp &= ~SDHCI_CDNS_HRS06_MODE;
> > > tmp |= FIELD_PREP(SDHCI_CDNS_HRS06_MODE, mode);
> > > writel(tmp, plat->hrs_addr + SDHCI_CDNS_HRS06);
> > > +
> > > + if (IS_ENABLED(CONFIG_MMC_SDHCI_CADENCE_V6))
> > > + sdhci_cdns6_phy_init(plat, mode);
> > > }
> > >
> > > static const struct sdhci_ops sdhci_cdns_ops = { @@ -172,6 +129,9
> > > @@ static const struct sdhci_ops sdhci_cdns_ops = { static int
> > > sdhci_cdns_set_tune_val(struct sdhci_cdns_plat *plat,
> > > unsigned int val)
> > > {
> > > + if (IS_ENABLED(CONFIG_MMC_SDHCI_CADENCE_V6))
> > > + return sdhci_cdns6_set_tune_val(plat, val);
> > > +
> > > void __iomem *reg = plat->hrs_addr + SDHCI_CDNS_HRS06;
> > > u32 tmp;
> > > int i, ret;
> > > @@ -301,6 +261,7 @@ static int sdhci_cdns_probe(struct udevice *dev)
> > > static const struct udevice_id sdhci_cdns_match[] = {
> > > { .compatible = "socionext,uniphier-sd4hc" },
> > > { .compatible = "cdns,sd4hc" },
> > > + { .compatible = "cdns,sd6hc" },
> > > { /* sentinel */ }
> > > };
> > >
> > > diff --git a/drivers/mmc/sdhci-cadence.h
> > > b/drivers/mmc/sdhci-cadence.h new file mode 100644 index
> > > 0000000000..2c42cff2f3
> > > --- /dev/null
> > > +++ b/drivers/mmc/sdhci-cadence.h
> > > @@ -0,0 +1,68 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (C) 2022 Starfive.
> > > + * Author: Kuan Lim Lee <kuanlim.lee at starfivetech.com>
> >
> >
> > Does it right Copyright and author? the below codes are taken from
> > sdhci- cadence.c.
> Some parts of #define are taken from sdchi-cadence.c, some parts of #define
> are written by me. I think I still better put back the original Copyright and
> author.
>
> >
> > > + */
> > > +
> > > +#ifndef SDHCI_CADENCE_H_
> > > +#define SDHCI_CADENCE_H_
> > > +
> > > +/* HRS - Host Register Set (specific to Cadence) */
> > > +/* PHY access port */
> > > +#define SDHCI_CDNS_HRS04 0x10
> > > +/* Cadence V4 HRS04 Description*/
> > > +#define SDHCI_CDNS_HRS04_ACK BIT(26)
> > > +#define SDHCI_CDNS_HRS04_RD BIT(25)
> > > +#define SDHCI_CDNS_HRS04_WR BIT(24)
> > > +#define SDHCI_CDNS_HRS04_RDATA GENMASK(23, 16)
> > > +#define SDHCI_CDNS_HRS04_WDATA GENMASK(15, 8)
> > > +#define SDHCI_CDNS_HRS04_ADDR GENMASK(5,
> 0)
> > > +
> > > +#define SDHCI_CDNS_HRS05 0x14
> > > +
> > > +/* eMMC control */
> > > +#define SDHCI_CDNS_HRS06 0x18
> > > +#define SDHCI_CDNS_HRS06_TUNE_UP BIT(15)
> > > +#define SDHCI_CDNS_HRS06_TUNE GENMASK(13,
> 8)
> > > +#define SDHCI_CDNS_HRS06_MODE GENMASK(2,
> > 0)
> > > +#define SDHCI_CDNS_HRS06_MODE_SD 0x0
> > > +#define SDHCI_CDNS_HRS06_MODE_MMC_SDR 0x2
> > > +#define SDHCI_CDNS_HRS06_MODE_MMC_DDR 0x3
> > > +#define SDHCI_CDNS_HRS06_MODE_MMC_HS200 0x4
> > > +#define SDHCI_CDNS_HRS06_MODE_MMC_HS400 0x5
> > > +#define SDHCI_CDNS_HRS06_MODE_MMC_HS400ES 0x6
> > > +
> > > +/* SRS - Slot Register Set (SDHCI-compatible) */
> > > +#define SDHCI_CDNS_SRS_BASE 0x200
> > > +
> > > +/* Cadence V4 PHY Setting*/
> > > +#define SDHCI_CDNS_PHY_DLY_SD_HS 0x00
> > > +#define SDHCI_CDNS_PHY_DLY_SD_DEFAULT 0x01
> > > +#define SDHCI_CDNS_PHY_DLY_UHS_SDR12 0x02
> > > +#define SDHCI_CDNS_PHY_DLY_UHS_SDR25 0x03
> > > +#define SDHCI_CDNS_PHY_DLY_UHS_SDR50 0x04
> > > +#define SDHCI_CDNS_PHY_DLY_UHS_DDR50 0x05
> > > +#define SDHCI_CDNS_PHY_DLY_EMMC_LEGACY 0x06
> > > +#define SDHCI_CDNS_PHY_DLY_EMMC_SDR 0x07
> > > +#define SDHCI_CDNS_PHY_DLY_EMMC_DDR 0x08
> > > +#define SDHCI_CDNS_PHY_DLY_SDCLK 0x0b
> > > +#define SDHCI_CDNS_PHY_DLY_HSMMC 0x0c
> > > +#define SDHCI_CDNS_PHY_DLY_STROBE 0x0d
> > > +
> > > +/*
> > > + * The tuned val register is 6 bit-wide, but not the whole of the
> > > +range is
> > > + * available. The range 0-42 seems to be available (then 43 wraps
> > > +around to 0)
> > > + * but I am not quite sure if it is official. Use only 0 to 39 for safety.
> > > + */
> > > +#define SDHCI_CDNS_MAX_TUNING_LOOP 40
> > > +
> > > +struct sdhci_cdns_plat {
> > > + struct mmc_config cfg;
> > > + struct mmc mmc;
> > > + void __iomem *hrs_addr;
> > > +};
> > > +
> > > +int sdhci_cdns6_phy_init(struct sdhci_cdns_plat *plat, u32 mode);
> > > +int sdhci_cdns6_set_tune_val(struct sdhci_cdns_plat *plat, unsigned
> > > +int val);
> > > +
> > > +#endif
> > > diff --git a/drivers/mmc/sdhci-cadence6-phy.c
> > > b/drivers/mmc/sdhci-cadence6-phy.c
> > > new file mode 100644
> > > index 0000000000..dd3df27dc8
> > > --- /dev/null
> > > +++ b/drivers/mmc/sdhci-cadence6-phy.c
> > > @@ -0,0 +1,302 @@
> > > +// SPDX-License-Identifier: GPL-2.0-or-platform_driver
> > > +/*
> > > + * Copyright (C) 2022 Starfive.
> >
> > s/2022/2023?
> I will put 2023.
>
> >
> > > + * Author: Kuan Lim Lee <kuanlim.lee at starfivetech.com>
> > > + */
> > > +
> > > +#include <common.h>
> > > +#include <dm.h>
> > > +#include <asm/global_data.h>
> > > +#include <dm/device_compat.h>
> > > +#include <linux/bitfield.h>
> > > +#include <linux/bitops.h>
> > > +#include <linux/bug.h>
> > > +#include <linux/io.h>
> > > +#include <linux/iopoll.h>
> > > +#include <linux/sizes.h>
> > > +#include <linux/libfdt.h>
> > > +#include <mmc.h>
> > > +#include <sdhci.h>
> > > +#include "sdhci-cadence.h"
> > > +
> > > +/* IO Delay Information */
> > > +#define SDHCI_CDNS_HRS07 0X1C
> > > +#define SDHCI_CDNS_HRS07_RW_COMPENSATE GENMASK(20,
> > 16)
> > > +#define SDHCI_CDNS_HRS07_IDELAY_VAL GENMASK(4,
> > 0)
> > > +
> > > +#define SDHCI_CDNS_HRS09 0x24 /* PHY Control
> and
> > Status */
> > > +#define SDHCI_CDNS_HRS09_RDDATA_EN BIT(16)
> > > +#define SDHCI_CDNS_HRS09_RDCMD_EN BIT(15)
> > > +#define SDHCI_CDNS_HRS09_EXTENDED_WR_MODE BIT(3)
> > > +#define SDHCI_CDNS_HRS09_EXTENDED_RD_MODE BIT(2)
> > > +#define SDHCI_CDNS_HRS09_PHY_INIT_COMPLETE BIT(1)
> > > +#define SDHCI_CDNS_HRS09_PHY_SW_RESET BIT(0)
> > > +
> > > +#define SDHCI_CDNS_HRS10 0x28 /* SDCLK
> adjustment
> > */
> > > +#define SDHCI_CDNS_HRS10_HCSDCLKADJ GENMASK(19,
> 16)
> > > +
> > > +#define SDHCI_CDNS_HRS16 0x40 /* CMD/DAT
> output
> > delay */
> > > +
> > > +/* PHY Special Function Registers */
> > > +//#define DLL_PHY_REG_BASE 0x2000
> > > +
> > > +/* register to control the DQ related timing */
> > > +#define PHY_DQ_TIMING_REG_ADDR 0x2000
> > > +
> > > +/* register to control the DQS related timing */
> > > +#define PHY_DQS_TIMING_REG_ADDR 0x2004
> > > +
> > > +/* register to control the gate and loopback control related timing */
> > > +#define PHY_GATE_LPBK_CTRL_REG_ADDR 0x2008
> > > +
> > > +/* register to control the Master DLL logic */
> > > +#define PHY_DLL_MASTER_CTRL_REG_ADDR 0x200C
> > > +
> > > +/* register to control the Slave DLL logic */
> > > +#define PHY_DLL_SLAVE_CTRL_REG_ADDR 0x2010
> > > +#define PHY_DLL_SLAVE_CTRL_REG_READ_DQS_CMD_DELAY
> > GENMASK(31, 24)
> > > +#define PHY_DLL_SLAVE_CTRL_REG_READ_DQS_DELAY
> > GENMASK(7, 0)
> > > +
> > > +/* register to control the global settings for PHY */
> > > +#define PHY_CTRL_REG_ADDR 0x2080
> > > +
> > > +struct phy_reg {
> > > + u32 phy_dqs_timing;
> > > + u32 phy_gate_lpbk_ctrl;
> > > + //u32 phy_dll_master_ctrl;
> >
> > Remove unused code.
> Noted.
> >
> > > + u32 phy_dll_slave_ctrl;
> > > + //u32 phy_ctrl;
> >
> > ditto
> Noted.
> >
> > > + u32 phy_dq_timing;
> > > + //cp_sw_half_cycle_shift; ASIC
> >
> > Ditto
> Noted.
> >
> > > +};
> > > +
> > > +struct controller_reg {
> > > + u32 hrs07;
> > > + u32 hrs09;
> > > + u32 hrs10;
> > > + u32 hrs16;
> > > +};
> >
> >
> > As some reg values can be re-used. I don't know what its value means.
> > e.g) 0x00380004 is sued sd_ds/emmc_sdr/emmc_ddr/emmc_hs200.
> This value is generated by script provided by Cadence.
> e.g.) phy_dqs_timing_reg (0x2004) is a 32 bits register, inside the register has
> few component: use_ext_lpbk_dqs, use_lpbk_dqs, use_phony_dqs,
> use_phony_dqs_cmd, phony_dqs_sel, dqs_select_tsel_start and
> dqs_select_tsel_end.
>
> Each components value is generated by script and I combined the value in a 32
> bits value, 0x00380004.
>
> >
> > I don't want to use a magic code. If you can add some macros, it's
> > more readable.
> Should I change the struct in way below, so that it is more reable?
> static struct sdhci_cdns_phy_reg_pairs sd_ds_mode_setting[] = {
> {0x00380000, PHY_DQS_TIMING_REG_ADDR},
> {0x01A00040, PHY_GATE_LPBK_CTRL_REG_ADDR},
> {0x00000000, PHY_DLL_SLAVE_CTRL_REG_ADDR},
> {0x00000180, PHY_CTRL_REG_ADDR},
> {0x00000001, PHY_DQ_TIMING_REG_ADDR},
> };
>
> Or I have to put each value of components and put a convertion function in the
> code to change this to 32 bits value and program inti register,
> phy_dqs_timing_reg (0x2004)?
>
> >
> > > +
> > > +static struct phy_reg sd_ds_phy_cfg = {
> > > + 0x00380004,
> > > + 0x01A00040,
> > > + 0x00000000,
> > > + 0x00000001,
> > > +};
> > > +
> > > +static struct phy_reg emmc_sdr_phy_cfg = {
> > > + 0x00380004,
> > > + 0x01A00040,
> > > + 0x00000000,
> > > + 0x00000001,
> > > +};
> > > +
> > > +static struct phy_reg emmc_ddr_phy_cfg = {
> > > + 0x00380004,
> > > + 0x01A00040,
> > > + 0x00000000,
> > > + 0x10000001,
> > > +};
> > > +
> > > +static struct phy_reg emmc_hs200_phy_cfg = {
> > > + 0x00380004,
> > > + 0x01A00040,
> > > + 0x00DADA00,
> > > + 0x00000001,
> > > +};
> > > +
> > > +static struct phy_reg emmc_hs400_phy_cfg = {
> > > + 0x00280004,
> > > + 0x01A00040,
> > > + 0x00DAD800,
> > > + 0x00000001,
> > > +};
> > > +
> > > +static struct controller_reg sd_ds_ctrl_cfg = {
> > > + 0x00080000,
> > > + 0x0001800C,
> > > + 0x00020000,
> > > + 0x00000000,
> > > +};
> > > +
> > > +static struct controller_reg emmc_sdr_ctrl_cfg = {
> > > + 0x00080000,
> > > + 0x0001800C,
> > > + 0x00030000,
> > > + 0x00000000,
> > > +};
> > > +
> > > +static struct controller_reg emmc_ddr_ctrl_cfg = {
> > > + 0x00090001,
> > > + 0x0001800C,
> > > + 0x00020000,
> > > + 0x11000001,
> > > +};
> > > +
> > > +static struct controller_reg emmc_hs200_ctrl_cfg = {
> > > + 0x00090000,
> > > + 0x00018000,
> > > + 0x00080000,
> > > + 0x00000000,
> > > +};
> > > +
> > > +static struct controller_reg emmc_hs400_ctrl_cfg = {
> > > + 0x00080000,
> > > + 0x00018000,
> > > + 0x00080000,
> > > + 0x11000000,
> > > +};
> > > +
> > > +static unsigned int sdhci_cdns6_read_phy_reg(struct sdhci_cdns_plat *plat,
> > > + u32 addr)
> > > +{
> > > + u32 data = 0;
> > > +
> > > + writel(addr, plat->hrs_addr + SDHCI_CDNS_HRS04);
> > > + data = readl(plat->hrs_addr + SDHCI_CDNS_HRS05);
> > > + return data;
> > > +}
> > > +
> > > +static void sdhci_cdns6_write_phy_reg(struct sdhci_cdns_plat *plat,
> > > + u32 addr, u32 data)
> > > +{
> > > + u32 readdat = 0;
> > > +
> > > + writel(addr, plat->hrs_addr + SDHCI_CDNS_HRS04);
> > > + writel(data, plat->hrs_addr + SDHCI_CDNS_HRS05);
> > > + readdat = readl(plat->hrs_addr + SDHCI_CDNS_HRS05);
> > > +
> > > + if (readdat != data) {
> > > + pr_err("Error, %s: Writing failed!: address: 0x%x, value : 0x%x,
> > > + readval: 0x%x\n", __func__, addr, data, readdat);
> >
> >
> > Doesn't need to return error value?
> Yes, I think it will be changed to return error value.
> >
> >
> > > + }
> > > +}
> > > +
> > > +static int sdhci_cdns6_reset_phy_dll(struct sdhci_cdns_plat *plat,
> > > + unsigned int reset)
> > > +{
> > > + void __iomem *reg = plat->hrs_addr + SDHCI_CDNS_HRS09;
> > > + u32 tmp;
> > > + int ret;
> > > +
> > > + tmp = readl(reg);
> > > + tmp &= ~SDHCI_CDNS_HRS09_PHY_SW_RESET;
> > > +
> > > + if (reset) /* Switch On DLL Reset */
> >
> >
> > /* Swithc On DLL Reset */
> Noted, thanks for telling.
>
> > if (reset)
> > ...
> > else
> > ...
> >
> >
> > > + tmp |= FIELD_PREP(SDHCI_CDNS_HRS09_PHY_SW_RESET, 0);
> > > + else /* Switch Off DLL Reset */
> > > + tmp |= FIELD_PREP(SDHCI_CDNS_HRS09_PHY_SW_RESET, 1);
> > > +
> > > + writel(tmp, reg);
> > > +
> > > + if (!reset) {
> > > + ret = readl_poll_timeout(reg, tmp,
> > > + (tmp &
> > SDHCI_CDNS_HRS09_PHY_INIT_COMPLETE),
> > > + 3000);
> >
> > Add a comment why it needs to poll during 3000.
> Actually 3000 us is a safe range. User manual doesn’t specify, I put myself.
> Comment will be like below:
> /* After reset, wait for PHY_INIT_COMPLETE in HRS09 register until it is set to 1
> within 3000us*/
>
> >
> > > + }
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +int sdhci_cdns6_phy_init(struct sdhci_cdns_plat *plat, u32 mode) {
> > > + struct phy_reg *phy_cfgs;
> > > + struct controller_reg *ctrl_cfgs;
> > > + void __iomem *reg = NULL;
> > > + u32 tmp;
> > > + int ret;
> > > +
> > > + switch (mode) {
> > > + case SDHCI_CDNS_HRS06_MODE_SD:
> > > + phy_cfgs = &sd_ds_phy_cfg;
> > > + ctrl_cfgs = &sd_ds_ctrl_cfg;
> > > + break;
> > > +
> > > + case SDHCI_CDNS_HRS06_MODE_MMC_SDR:
> > > + phy_cfgs = &emmc_sdr_phy_cfg;
> > > + ctrl_cfgs = &emmc_sdr_ctrl_cfg;
> > > + break;
> > > +
> > > + case SDHCI_CDNS_HRS06_MODE_MMC_DDR:
> > > + phy_cfgs = &emmc_ddr_phy_cfg;
> > > + ctrl_cfgs = &emmc_ddr_ctrl_cfg;
> > > + break;
> > > +
> > > + case SDHCI_CDNS_HRS06_MODE_MMC_HS200:
> > > + phy_cfgs = &emmc_hs200_phy_cfg;
> > > + ctrl_cfgs = &emmc_hs200_ctrl_cfg;
> > > + break;
> > > +
> > > + case SDHCI_CDNS_HRS06_MODE_MMC_HS400:
> > > + phy_cfgs = &emmc_hs400_phy_cfg;
> > > + ctrl_cfgs = &emmc_hs400_ctrl_cfg;
> > > + break;
> >
> >
> > If there is no matched mod, phy_cfgs and ctrl_cfgs should be NULL.
> Noted.
>
> >
> > > + }
> > > +
> > > + /* Switch On the DLL Reset */
> > > + sdhci_cdns6_reset_phy_dll(plat, 1);
> > > +
> > > + sdhci_cdns6_write_phy_reg(plat, PHY_DQS_TIMING_REG_ADDR,
> > > + phy_cfgs->phy_dqs_timing);
> > > + sdhci_cdns6_write_phy_reg(plat, PHY_GATE_LPBK_CTRL_REG_ADDR,
> > > + phy_cfgs->phy_gate_lpbk_ctrl);
> > > + sdhci_cdns6_write_phy_reg(plat, PHY_DLL_SLAVE_CTRL_REG_ADDR,
> > > + phy_cfgs->phy_dll_slave_ctrl);
> > > +
> > > + /* Switch Off the DLL Reset */
> > > + ret = sdhci_cdns6_reset_phy_dll(plat, 0);
> > > + if (ret) {
> > > + printf("sdhci_cdns6_reset_phy is not completed\n");
> > > + return ret;
> > > + }
> > > +
> > > + /* Set PHY DQ TIMING control register */
> > > + sdhci_cdns6_write_phy_reg(plat, PHY_DQ_TIMING_REG_ADDR,
> > > + phy_cfgs->phy_dq_timing);
> > > +
> > > + /* Set HRS09 register */
> > > + reg = plat->hrs_addr + SDHCI_CDNS_HRS09;
> > > + tmp = readl(reg);
> >
> >
> > I'm not suer why plat-hrs_addr assigned to reg.
> > How about using the below?
> >
> > hrs_base_addr = plat->hrs_addr;
> >
> > readl(hrs_base_addr + SDHCI_CDNS_HRS10);
> >
> > Then you can change the below code like
> >
> > readl(hrs_base_addr + SDHCI_CDNS_HRS16); readl(hrs_base_addr +
> > SDHCI_CDNS_HRS07);
> >
> > Otherwise, readl(plat->hrs_addr + SDHCI_xxx);
> Noted, this looked simpler.
>
> >
> >
> > > + tmp &= ~(SDHCI_CDNS_HRS09_EXTENDED_WR_MODE |
> > > + SDHCI_CDNS_HRS09_EXTENDED_RD_MODE |
> > > + SDHCI_CDNS_HRS09_RDDATA_EN |
> > > + SDHCI_CDNS_HRS09_RDCMD_EN);
> > > + tmp |= ctrl_cfgs->hrs09;
> > > + writel(tmp, reg);
> > > +
> > > + /* Set HRS10 register */
> > > + reg = plat->hrs_addr + SDHCI_CDNS_HRS10;
> > > + tmp = readl(reg);
> > > + tmp &= ~SDHCI_CDNS_HRS10_HCSDCLKADJ;
> > > + tmp |= ctrl_cfgs->hrs10;
> > > + writel(tmp, reg);
> > > +
> > > + /* Set HRS16 register */
> > > + reg = plat->hrs_addr + SDHCI_CDNS_HRS16;
> > > + tmp = ctrl_cfgs->hrs16;
> > > + writel(tmp, reg);
> > > +
> > > + /* Set HRS07 register */
> > > + reg = plat->hrs_addr + SDHCI_CDNS_HRS07;
> > > + tmp = ctrl_cfgs->hrs07;
> > > + writel(tmp, reg);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +int sdhci_cdns6_set_tune_val(struct sdhci_cdns_plat *plat,
> > > + unsigned int val)
> > > +{
> > > + u32 tmp, tuneval;
> >
> > Ditto.
> Any problem with this? I think current way looked simple.
>
> >
> > Best Regards,
> > Jaehoon Chung
> >
> > > +
> > > + tuneval = (val * 256) / SDHCI_CDNS_MAX_TUNING_LOOP;
> > > +
> > > + tmp = sdhci_cdns6_read_phy_reg(plat,
> > PHY_DLL_SLAVE_CTRL_REG_ADDR);
> > > + tmp &= ~(PHY_DLL_SLAVE_CTRL_REG_READ_DQS_CMD_DELAY |
> > > + PHY_DLL_SLAVE_CTRL_REG_READ_DQS_DELAY);
> > > + tmp |=
> > FIELD_PREP(PHY_DLL_SLAVE_CTRL_REG_READ_DQS_CMD_DELAY, tuneval) |
> > > + FIELD_PREP(PHY_DLL_SLAVE_CTRL_REG_READ_DQS_DELAY,
> > tuneval);
> > > + sdhci_cdns6_write_phy_reg(plat, PHY_DLL_SLAVE_CTRL_REG_ADDR,
> > tmp);
> > > +
> > > + return 0;
> > > +}
> >
More information about the U-Boot
mailing list