[PATCH 1/2] arm: dts: k3-binman: Add support for FIT templates

[Neha Malcom Francis]

Add templates for FIT images used extensively across K3 boards with most
of the code common. This includes the FIT portions of:
	- tispl.bin
	- u-boot.img
	- sysfw.itb (in case of legacy boot flow)

Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
---
 arch/arm/dts/k3-binman.dtsi | 327 ++++++++++++++++++++++++++++++++++++
 1 file changed, 327 insertions(+)

diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi
index 2ea2dd18a1..677a017403 100644
--- a/arch/arm/dts/k3-binman.dtsi
+++ b/arch/arm/dts/k3-binman.dtsi
@@ -113,4 +113,331 @@
 	};
 };
 
+&binman {
+	itb_template: template-5 {
+		fit {
+			description = "SYSFW and Config fragments";
+			#address-cells = <1>;
+			images {
+				sysfw.bin {
+					description = "sysfw";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					blob-ext {
+					    filename = "sysfw.bin";
+					};
+				};
+				board-cfg.bin {
+					description = "board-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					ti-secure {
+						content = <&board_cfg>;
+						keyfile = "custMpk.pem";
+					};
+					board_cfg: board-cfg {
+						filename = "board-cfg.bin";
+						type = "blob-ext";
+					};
+
+				};
+				pm-cfg.bin {
+					description = "pm-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					ti-secure {
+						content = <&pm_cfg>;
+						keyfile = "custMpk.pem";
+					};
+					pm_cfg: pm-cfg {
+						filename = "pm-cfg.bin";
+						type = "blob-ext";
+					};
+				};
+				rm-cfg.bin {
+					description = "rm-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					ti-secure {
+						content = <&rm_cfg>;
+						keyfile = "custMpk.pem";
+					};
+					rm_cfg: rm-cfg {
+						filename = "rm-cfg.bin";
+						type = "blob-ext";
+					};
+				};
+				sec-cfg.bin {
+					description = "sec-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					ti-secure {
+						content = <&sec_cfg>;
+						keyfile = "custMpk.pem";
+					};
+					sec_cfg: sec-cfg {
+						filename = "sec-cfg.bin";
+						type = "blob-ext";
+					};
+				};
+			};
+		};
+	};
+
+	itb_unsigned_template: template-6 {
+		fit {
+			description = "SYSFW and Config fragments";
+			#address-cells = <1>;
+			images {
+				sysfw.bin {
+					description = "sysfw";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					blob-ext {
+					    filename = "sysfw.bin_fs";
+					};
+				};
+				board-cfg.bin {
+					description = "board-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					board-cfg {
+						filename = "board-cfg.bin";
+						type = "blob-ext";
+					};
+
+				};
+				pm-cfg.bin {
+					description = "pm-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					pm-cfg {
+						filename = "pm-cfg.bin";
+						type = "blob-ext";
+					};
+				};
+				rm-cfg.bin {
+					description = "rm-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					rm-cfg {
+						filename = "rm-cfg.bin";
+						type = "blob-ext";
+					};
+				};
+				sec-cfg.bin {
+					description = "sec-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					sec-cfg {
+						filename = "sec-cfg.bin";
+						type = "blob-ext";
+					};
+				};
+			};
+		};
+	};
+};
+
+#else
+
+&binman {
+	ti_spl_template: template-1 {
+		filename = "tispl.bin";
+		pad-byte = <0xff>;
+
+		fit {
+			description = "Configuration to load ATF and SPL";
+			#address-cells = <1>;
+
+			images {
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					os = "arm-trusted-firmware";
+					load = <CONFIG_K3_ATF_LOAD_ADDR>;
+					entry = <CONFIG_K3_ATF_LOAD_ADDR>;
+					ti-secure {
+						content = <&atf>;
+						keyfile = "custMpk.pem";
+					};
+					atf: atf-bl31 {
+					};
+				};
+
+				tee {
+					description = "OP-TEE";
+					type = "tee";
+					arch = "arm64";
+					compression = "none";
+					os = "tee";
+					load = <0x9e800000>;
+					entry = <0x9e800000>;
+					ti-secure {
+						content = <&tee>;
+						keyfile = "custMpk.pem";
+					};
+					tee: tee-os {
+					};
+				};
+
+				dm {
+					description = "DM binary";
+					type = "firmware";
+					arch = "arm32";
+					compression = "none";
+					os = "DM";
+					load = <0x89000000>;
+					entry = <0x89000000>;
+				};
+
+				spl {
+					description = "SPL (64-bit)";
+					type = "standalone";
+					os = "U-Boot";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SPL_TEXT_BASE>;
+					entry = <CONFIG_SPL_TEXT_BASE>;
+					ti-secure {
+						content = <&u_boot_spl_nodtb>;
+						keyfile = "custMpk.pem";
+
+					};
+					u_boot_spl_nodtb: blob-ext {
+						filename = "spl/u-boot-spl-nodtb.bin";
+					};
+				};
+
+			};
+		};
+	};
+	ti_spl_unsigned_template: template-2 {
+		filename = "tispl.bin_unsigned";
+		pad-byte = <0xff>;
+
+		fit {
+			description = "Configuration to load ATF and SPL";
+			#address-cells = <1>;
+
+			images {
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					os = "arm-trusted-firmware";
+					load = <CONFIG_K3_ATF_LOAD_ADDR>;
+					entry = <CONFIG_K3_ATF_LOAD_ADDR>;
+					atf-bl31 {
+						filename = "bl31.bin";
+					};
+				};
+
+				tee {
+					description = "OP-TEE";
+					type = "tee";
+					arch = "arm64";
+					compression = "none";
+					os = "tee";
+					load = <0x9e800000>;
+					entry = <0x9e800000>;
+					tee-os {
+						filename = "tee-raw.bin";
+					};
+				};
+
+				dm {
+					description = "DM binary";
+					type = "firmware";
+					arch = "arm32";
+					compression = "none";
+					os = "DM";
+					load = <0x89000000>;
+					entry = <0x89000000>;
+				};
+
+				spl {
+					description = "SPL (64-bit)";
+					type = "standalone";
+					os = "U-Boot";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SPL_TEXT_BASE>;
+					entry = <CONFIG_SPL_TEXT_BASE>;
+					blob-ext {
+						filename = "spl/u-boot-spl-nodtb.bin";
+					};
+				};
+			};
+		};
+	};
+	u_boot_template: template-3 {
+		filename = "u-boot.img";
+		pad-byte = <0xff>;
+
+		fit {
+			description = "FIT image with multiple configurations";
+
+			images {
+				uboot {
+					type = "firmware";
+					os = "u-boot";
+					arch = "arm";
+					compression = "none";
+					load = <CONFIG_TEXT_BASE>;
+					ti-secure {
+						content = <&u_boot_nodtb>;
+						keyfile = "custMpk.pem";
+					};
+					u_boot_nodtb: u-boot-nodtb {
+					};
+					hash {
+						algo = "crc32";
+					};
+				};
+			};
+		};
+	};
+	u_boot_unsigned_template: template-4 {
+		filename = "u-boot.img_unsigned";
+		pad-byte = <0xff>;
+
+		fit {
+			description = "FIT image with multiple configurations";
+
+			images {
+				uboot {
+					type = "firmware";
+					os = "u-boot";
+					arch = "arm";
+					compression = "none";
+					load = <CONFIG_TEXT_BASE>;
+					blob {
+						filename = "u-boot-nodtb.bin";
+					};
+					hash {
+						algo = "crc32";
+					};
+				};
+			};
+		};
+	};
+
+};
+
 #endif
-- 
2.34.1