[PATCH 2/2] arm: dts: k3-*-binman: Move to using templated FITs
Neha Malcom Francis
n-francis at ti.com
Wed Nov 15 11:10:24 CET 2023
Reduce redundancy in code by using templates to generate the A72 boot
binaries (tispl.bin and u-boot.img) as well as R5 boot binary sysfw.itb
(for legacy boot following devices J721E and AM65x).
Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
---
arch/arm/dts/k3-am625-sk-binman.dtsi | 157 +--------
.../dts/k3-am625-verdin-wifi-dev-binman.dtsi | 155 +-------
arch/arm/dts/k3-am62a-sk-binman.dtsi | 158 +--------
arch/arm/dts/k3-am64x-binman.dtsi | 151 +-------
arch/arm/dts/k3-am65x-binman.dtsi | 273 +-------------
arch/arm/dts/k3-j7200-binman.dtsi | 159 +--------
arch/arm/dts/k3-j721e-binman.dtsi | 332 +-----------------
arch/arm/dts/k3-j721s2-binman.dtsi | 157 +--------
8 files changed, 54 insertions(+), 1488 deletions(-)
diff --git a/arch/arm/dts/k3-am625-sk-binman.dtsi b/arch/arm/dts/k3-am625-sk-binman.dtsi
index 41277bf4bf..b7b5368886 100644
--- a/arch/arm/dts/k3-am625-sk-binman.dtsi
+++ b/arch/arm/dts/k3-am625-sk-binman.dtsi
@@ -141,10 +141,7 @@
#ifdef CONFIG_TARGET_AM625_A53_EVM
-#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_AM625_SK_DTB "spl/dts/k3-am625-sk.dtb"
-
-#define UBOOT_NODTB "u-boot-nodtb.bin"
#define AM625_SK_DTB "u-boot.dtb"
&binman {
@@ -155,55 +152,11 @@
};
};
ti-spl {
- filename = "tispl.bin";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- ti-secure {
- content = <&atf>;
- keyfile = "custMpk.pem";
- };
- atf: atf-bl31 {
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- ti-secure {
- content = <&tee>;
- keyfile = "custMpk.pem";
- };
- tee: tee-os {
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
ti-secure {
content = <&dm>;
keyfile = "custMpk.pem";
@@ -213,23 +166,6 @@
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_spl_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_spl_nodtb: blob-ext {
- filename = SPL_NODTB;
- };
- };
-
fdt-0 {
description = "k3-am625-sk";
type = "flat_dt";
@@ -263,29 +199,12 @@
&binman {
u-boot {
- filename = "u-boot.img";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM625 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_nodtb: u-boot-nodtb {
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for AM625 Board";
};
fdt-0 {
@@ -323,67 +242,17 @@
&binman {
ti-spl_unsigned {
- filename = "tispl.bin_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_unsigned_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- atf-bl31 {
- filename = "bl31.bin";
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- tee-os {
- filename = "tee-raw.bin";
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "ti-dm.bin";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- blob {
- filename = "spl/u-boot-spl-nodtb.bin";
- };
- };
-
fdt-0 {
description = "k3-am625-sk";
type = "flat_dt";
@@ -411,26 +280,12 @@
&binman {
u-boot_unsigned {
- filename = "u-boot.img_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_unsigned_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM625 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- blob {
- filename = UBOOT_NODTB;
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for AM625 Board";
};
fdt-0 {
diff --git a/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi b/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi
index 089b2a5f5c..eafd3310bb 100644
--- a/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi
+++ b/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi
@@ -214,10 +214,7 @@
#ifdef CONFIG_TARGET_VERDIN_AM62_A53
-#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_VERDIN_AM62_DTB "spl/dts/k3-am625-verdin-wifi-dev.dtb"
-
-#define UBOOT_NODTB "u-boot-nodtb.bin"
#define VERDIN_AM62_DTB "u-boot.dtb"
&binman {
@@ -228,54 +225,12 @@
};
};
ti-spl {
- filename = "tispl.bin";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
images {
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- ti-secure {
- content = <&atf>;
- keyfile = "custMpk.pem";
- };
- atf: atf-bl31 {
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- ti-secure {
- content = <&tee>;
- keyfile = "custMpk.pem";
- };
- tee: tee-os {
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
ti-secure {
content = <&dm>;
keyfile = "custMpk.pem";
@@ -285,23 +240,6 @@
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_spl_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_spl_nodtb: blob-ext {
- filename = SPL_NODTB;
- };
- };
-
fdt-0 {
description = "k3-am625-verdin-wifi-dev";
type = "flat_dt";
@@ -333,29 +271,12 @@
&binman {
u-boot {
- filename = "u-boot.img";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM625 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_nodtb: u-boot-nodtb {
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot fot AM625 Verdin Board";
};
fdt-0 {
@@ -392,66 +313,16 @@
&binman {
ti-spl_unsigned {
- filename = "tispl.bin_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_unsigned_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- atf-bl31 {
- filename = "bl31.bin";
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- tee-os {
- filename = "tee-raw.bin";
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "ti-dm.bin";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- blob {
- filename = "spl/u-boot-spl-nodtb.bin";
- };
- };
-
fdt-0 {
description = "k3-am625-verdin-wifi-dev";
type = "flat_dt";
@@ -479,26 +350,12 @@
&binman {
u-boot_unsigned {
- filename = "u-boot.img_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_unsigned_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM625 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- blob {
- filename = UBOOT_NODTB;
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for AM625 Verdin Board";
};
fdt-0 {
diff --git a/arch/arm/dts/k3-am62a-sk-binman.dtsi b/arch/arm/dts/k3-am62a-sk-binman.dtsi
index de09430d93..c5e027d44d 100644
--- a/arch/arm/dts/k3-am62a-sk-binman.dtsi
+++ b/arch/arm/dts/k3-am62a-sk-binman.dtsi
@@ -144,10 +144,7 @@
#ifdef CONFIG_TARGET_AM62A7_A53_EVM
-#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_AM62A7_SK_DTB "spl/dts/k3-am62a7-sk.dtb"
-
-#define UBOOT_NODTB "u-boot-nodtb.bin"
#define AM62A7_SK_DTB "u-boot.dtb"
&binman {
@@ -158,55 +155,11 @@
};
};
ti-spl {
- filename = "tispl.bin";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- ti-secure {
- content = <&atf>;
- keyfile = "custMpk.pem";
- };
- atf: atf-bl31 {
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- ti-secure {
- content = <&tee>;
- keyfile = "custMpk.pem";
- };
- tee: tee-os {
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
ti-secure {
content = <&dm>;
keyfile = "custMpk.pem";
@@ -216,23 +169,6 @@
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_spl_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_spl_nodtb: blob-ext {
- filename = SPL_NODTB;
- };
- };
-
fdt-0 {
description = "k3-am62a7-sk";
type = "flat_dt";
@@ -266,29 +202,12 @@
&binman {
u-boot {
- filename = "u-boot.img";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM62Ax board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_nodtb: u-boot-nodtb {
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for AM62Ax Board";
};
fdt-0 {
@@ -326,67 +245,16 @@
&binman {
ti-spl_unsigned {
- filename = "tispl.bin_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_unsigned_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- atf-bl31 {
- filename = "bl31.bin";
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- tee-os {
- filename = "tee-raw.bin";
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "ti-dm.bin";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- blob {
- filename = "spl/u-boot-spl-nodtb.bin";
- };
- };
-
fdt-0 {
description = "k3-am62a7-sk";
type = "flat_dt";
@@ -414,26 +282,12 @@
&binman {
u-boot_unsigned {
- filename = "u-boot.img_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_unsigned_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM62Ax board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- blob {
- filename = UBOOT_NODTB;
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for AM62Ax Board";
};
fdt-0 {
diff --git a/arch/arm/dts/k3-am64x-binman.dtsi b/arch/arm/dts/k3-am64x-binman.dtsi
index a5e54006b4..88df214954 100644
--- a/arch/arm/dts/k3-am64x-binman.dtsi
+++ b/arch/arm/dts/k3-am64x-binman.dtsi
@@ -118,87 +118,27 @@
#ifdef CONFIG_TARGET_AM642_A53_EVM
-#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_AM642_EVM_DTB "spl/dts/k3-am642-evm.dtb"
#define SPL_AM642_SK_DTB "spl/dts/k3-am642-sk.dtb"
-#define UBOOT_NODTB "u-boot-nodtb.bin"
#define AM642_EVM_DTB "u-boot.dtb"
#define AM642_SK_DTB "arch/arm/dts/k3-am642-sk.dtb"
&binman {
ti-spl {
- filename = "tispl.bin";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_template>;
fit {
description = "Configuration to load ATF and SPL";
#address-cells = <1>;
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- ti-secure {
- content = <&atf>;
- keyfile = "custMpk.pem";
- };
- atf: atf-bl31 {
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- ti-secure {
- content = <&tee>;
- keyfile = "custMpk.pem";
- };
- tee: tee-os {
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "/dev/null";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_spl_nodtb>;
- keyfile = "custMpk.pem";
-
- };
- u_boot_spl_nodtb: blob-ext {
- filename = SPL_NODTB;
- };
- };
fdt-0 {
description = "k3-am642-evm";
@@ -254,29 +194,12 @@
&binman {
u-boot {
- filename = "u-boot.img";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM64 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_nodtb: u-boot-nodtb {
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for AM64 Board";
};
fdt-0 {
@@ -340,65 +263,17 @@
&binman {
ti-spl_unsigned {
- filename = "tispl.bin_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_unsigned_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- atf-bl31 {
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- tee-os {
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "/dev/null";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- blob {
- filename = "spl/u-boot-spl-nodtb.bin";
- };
- };
-
fdt-0 {
description = "k3-am642-evm";
type = "flat_dt";
@@ -443,26 +318,12 @@
&binman {
u-boot_unsigned {
- filename = "u-boot.img_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_unsigned_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM64 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- blob {
- filename = UBOOT_NODTB;
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for AM64 Board";
};
fdt-0 {
diff --git a/arch/arm/dts/k3-am65x-binman.dtsi b/arch/arm/dts/k3-am65x-binman.dtsi
index 59605ca597..8cc24da1f3 100644
--- a/arch/arm/dts/k3-am65x-binman.dtsi
+++ b/arch/arm/dts/k3-am65x-binman.dtsi
@@ -42,77 +42,7 @@
};
itb {
filename = "sysfw-am65x_sr2-hs-evm.itb";
- fit {
- description = "SYSFW and Config fragments";
- #address-cells = <1>;
- images {
- sysfw.bin {
- description = "sysfw";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "sysfw.bin";
- };
- };
- board-cfg.bin {
- description = "board-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- ti-secure {
- content = <&board_cfg>;
- keyfile = "custMpk.pem";
- };
- board_cfg: board-cfg {
- filename = "board-cfg.bin";
- type = "blob-ext";
- };
- };
- pm-cfg.bin {
- description = "pm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- ti-secure {
- content = <&pm_cfg>;
- keyfile = "custMpk.pem";
- };
- pm_cfg: pm-cfg {
- filename = "pm-cfg.bin";
- type = "blob-ext";
- };
- };
- rm-cfg.bin {
- description = "rm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- ti-secure {
- content = <&rm_cfg>;
- keyfile = "custMpk.pem";\
- };
- rm_cfg: rm-cfg {
- filename = "rm-cfg.bin";
- type = "blob-ext";
- };
- };
- sec-cfg.bin {
- description = "sec-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- ti-secure {
- content = <&sec_cfg>;
- keyfile = "custMpk.pem";
- };
- sec_cfg: sec-cfg {
- filename = "sec-cfg.bin";
- type = "blob-ext";
- };
- };
- };
- };
+ insert-template = <&itb_template>;
};
};
@@ -149,55 +79,14 @@
itb_gp {
filename = "sysfw-am65x_sr2-gp-evm.itb";
symlink = "sysfw.itb";
+ insert-template = <&itb_unsigned_template>;
fit {
- description = "SYSFW and Config fragments";
- #address-cells = <1>;
images {
sysfw.bin {
- description = "sysfw";
- type = "firmware";
- arch = "arm";
- compression = "none";
blob-ext {
filename = "sysfw.bin_gp";
};
};
- board-cfg.bin {
- description = "board-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "board-cfg.bin";
- };
- };
- pm-cfg.bin {
- description = "pm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "pm-cfg.bin";
- };
- };
- rm-cfg.bin {
- description = "rm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "rm-cfg.bin";
- };
- };
- sec-cfg.bin {
- description = "sec-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "sec-cfg.bin";
- };
- };
};
};
};
@@ -206,86 +95,22 @@
#ifdef CONFIG_TARGET_AM654_A53_EVM
-#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_AM654_EVM_DTB "spl/dts/k3-am654-base-board.dtb"
-
-#define UBOOT_NODTB "u-boot-nodtb.bin"
#define AM654_EVM_DTB "u-boot.dtb"
&binman {
ti-spl {
- filename = "tispl.bin";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- ti-secure {
- content = <&atf>;
- keyfile = "custMpk.pem";
- };
- atf: atf-bl31 {
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- ti-secure {
- content = <&tee>;
- keyfile = "custMpk.pem";
- };
- tee: tee-os {
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "/dev/null";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_spl_nodtb>;
- keyfile = "custMpk.pem";
-
- };
- u_boot_spl_nodtb: blob-ext {
- filename = SPL_NODTB;
- };
- };
-
fdt-0 {
description = "k3-am654-base-board";
type = "flat_dt";
@@ -317,29 +142,12 @@
&binman {
u-boot {
- filename = "u-boot.img";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM65 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_nodtb: u-boot-nodtb {
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for AM65 Board";
};
fdt-0 {
@@ -378,67 +186,16 @@
&binman {
ti-spl_unsigned {
- filename = "tispl.bin_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_unsigned_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- atf-bl31 {
- filename = "bl31.bin";
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- tee-os {
- filename = "tee-raw.bin";
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "/dev/null";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- blob-ext {
- filename = SPL_NODTB;
- };
- };
-
fdt-0 {
description = "k3-j721e-common-proc-board";
type = "flat_dt";
@@ -466,26 +223,12 @@
&binman {
u-boot_unsigned {
- filename = "u-boot.img_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_unsigned_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for AM65 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- blob {
- filename = UBOOT_NODTB;
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for AM65 Board";
};
fdt-0 {
diff --git a/arch/arm/dts/k3-j7200-binman.dtsi b/arch/arm/dts/k3-j7200-binman.dtsi
index 14f7dea65e..10c9d6cba7 100644
--- a/arch/arm/dts/k3-j7200-binman.dtsi
+++ b/arch/arm/dts/k3-j7200-binman.dtsi
@@ -180,10 +180,7 @@
#ifdef CONFIG_TARGET_J7200_A72_EVM
-#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_J7200_EVM_DTB "spl/dts/k3-j7200-common-proc-board.dtb"
-
-#define UBOOT_NODTB "u-boot-nodtb.bin"
#define J7200_EVM_DTB "u-boot.dtb"
&binman {
@@ -194,82 +191,20 @@
};
};
ti-spl {
- filename = "tispl.bin";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- ti-secure {
- content = <&atf>;
- keyfile = "custMpk.pem";
- };
- atf: atf-bl31 {
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- ti-secure {
- content = <&tee>;
- keyfile = "custMpk.pem";
- };
- tee: tee-os {
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
ti-secure {
content = <&dm>;
keyfile = "custMpk.pem";
};
-
dm: blob-ext {
filename = "ti-dm.bin";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_spl_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_spl_nodtb: blob-ext {
- filename = SPL_NODTB;
- };
- };
-
fdt-0 {
description = "k3-j7200-common-proc-board";
type = "flat_dt";
@@ -302,29 +237,12 @@
&binman {
u-boot {
- filename = "u-boot.img";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for J7200 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_nodtb: u-boot-nodtb {
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for J7200 Board";
};
fdt-0 {
@@ -362,67 +280,16 @@
&binman {
ti-spl_unsigned {
- filename = "tispl.bin_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_unsigned_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- atf-bl31 {
- filename = "bl31.bin";
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- tee-os {
- filename = "tee-raw.bin";
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "ti-dm.bin";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- blob {
- filename = SPL_NODTB;
- };
- };
-
fdt-1 {
description = "k3-j7200-common-proc-board";
type = "flat_dt";
@@ -450,26 +317,12 @@
&binman {
u-boot_unsigned {
- filename = "u-boot.img_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_unsigned_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for J7200 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- blob {
- filename = UBOOT_NODTB;
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for J7200 Board";
};
fdt-1 {
diff --git a/arch/arm/dts/k3-j721e-binman.dtsi b/arch/arm/dts/k3-j721e-binman.dtsi
index 4f566c21a9..5ddb474e3a 100644
--- a/arch/arm/dts/k3-j721e-binman.dtsi
+++ b/arch/arm/dts/k3-j721e-binman.dtsi
@@ -42,78 +42,7 @@
};
itb {
filename = "sysfw-j721e_sr1_1-hs-evm.itb";
- fit {
- description = "SYSFW and Config fragments";
- #address-cells = <1>;
- images {
- sysfw.bin {
- description = "sysfw";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "sysfw.bin";
- };
- };
- board-cfg.bin {
- description = "board-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- ti-secure {
- content = <&board_cfg>;
- keyfile = "custMpk.pem";
- };
- board_cfg: board-cfg {
- filename = "board-cfg.bin";
- type = "blob-ext";
- };
-
- };
- pm-cfg.bin {
- description = "pm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- ti-secure {
- content = <&pm_cfg>;
- keyfile = "custMpk.pem";
- };
- pm_cfg: pm-cfg {
- filename = "pm-cfg.bin";
- type = "blob-ext";
- };
- };
- rm-cfg.bin {
- description = "rm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- ti-secure {
- content = <&rm_cfg>;
- keyfile = "custMpk.pem";
- };
- rm_cfg: rm-cfg {
- filename = "rm-cfg.bin";
- type = "blob-ext";
- };
- };
- sec-cfg.bin {
- description = "sec-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- ti-secure {
- content = <&sec_cfg>;
- keyfile = "custMpk.pem";
- };
- sec_cfg: sec-cfg {
- filename = "sec-cfg.bin";
- type = "blob-ext";
- };
- };
- };
- };
+ insert-template = <&itb_template>;
};
};
@@ -145,62 +74,7 @@
};
itb_fs {
filename = "sysfw-j721e_sr2-hs-fs-evm.itb";
- fit {
- description = "SYSFW and Config fragments";
- #address-cells = <1>;
- images {
- sysfw.bin {
- description = "sysfw";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "sysfw.bin_fs";
- };
- };
- board-cfg.bin {
- description = "board-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- board-cfg {
- filename = "board-cfg.bin";
- type = "blob-ext";
- };
-
- };
- pm-cfg.bin {
- description = "pm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- pm-cfg {
- filename = "pm-cfg.bin";
- type = "blob-ext";
- };
- };
- rm-cfg.bin {
- description = "rm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- rm-cfg {
- filename = "rm-cfg.bin";
- type = "blob-ext";
- };
- };
- sec-cfg.bin {
- description = "sec-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- sec-cfg {
- filename = "sec-cfg.bin";
- type = "blob-ext";
- };
- };
- };
- };
+ insert-template = <&itb_unsigned_template>;
};
};
@@ -237,55 +111,15 @@
itb_gp {
filename = "sysfw-j721e-gp-evm.itb";
symlink = "sysfw.itb";
+ insert-template = <&itb_unsigned_template>;
+
fit {
- description = "SYSFW and Config fragments";
- #address-cells = <1>;
images {
sysfw.bin {
- description = "sysfw";
- type = "firmware";
- arch = "arm";
- compression = "none";
blob-ext {
filename = "sysfw.bin_gp";
};
};
- board-cfg.bin {
- description = "board-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "board-cfg.bin";
- };
- };
- pm-cfg.bin {
- description = "pm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "pm-cfg.bin";
- };
- };
- rm-cfg.bin {
- description = "rm-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "rm-cfg.bin";
- };
- };
- sec-cfg.bin {
- description = "sec-cfg";
- type = "firmware";
- arch = "arm";
- compression = "none";
- blob-ext {
- filename = "sec-cfg.bin";
- };
- };
};
};
};
@@ -294,11 +128,9 @@
#ifdef CONFIG_TARGET_J721E_A72_EVM
-#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_J721E_EVM_DTB "spl/dts/k3-j721e-common-proc-board.dtb"
#define SPL_J721E_SK_DTB "spl/dts/k3-j721e-sk.dtb"
-#define UBOOT_NODTB "u-boot-nodtb.bin"
#define J721E_EVM_DTB "u-boot.dtb"
#define J721E_SK_DTB "arch/arm/dts/k3-j721e-sk.dtb"
@@ -310,55 +142,11 @@
};
};
ti-spl {
- filename = "tispl.bin";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- ti-secure {
- content = <&atf>;
- keyfile = "custMpk.pem";
- };
- atf: atf-bl31 {
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- ti-secure {
- content = <&tee>;
- keyfile = "custMpk.pem";
- };
- tee: tee-os {
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
ti-secure {
content = <&dm>;
keyfile = "custMpk.pem";
@@ -368,24 +156,6 @@
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_spl_nodtb>;
- keyfile = "custMpk.pem";
-
- };
- u_boot_spl_nodtb: blob-ext {
- filename = SPL_NODTB;
- };
- };
-
fdt-0 {
description = "k3-j721e-common-proc-board";
type = "flat_dt";
@@ -439,29 +209,12 @@
&binman {
u-boot {
- filename = "u-boot.img";
- pad-byte = <0xff>;
-
+ insert-template = <&u_boot_template>;
fit {
- description = "FIT image with multiple configurations";
images {
uboot {
- description = "U-Boot for j721e board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_nodtb: u-boot-nodtb {
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for J721E Board";
};
fdt-0 {
@@ -524,67 +277,16 @@
&binman {
ti-spl_unsigned {
- filename = "tispl.bin_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_unsigned_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- atf-bl31 {
- filename = "bl31.bin";
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- tee-os {
- filename = "tee-raw.bin";
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "ti-dm.bin";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- blob-ext {
- filename = SPL_NODTB;
- };
- };
-
fdt-0 {
description = "k3-j721e-common-proc-board";
type = "flat_dt";
@@ -629,26 +331,12 @@
&binman {
u-boot_unsigned {
- filename = "u-boot.img_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_unsigned_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for j721e board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- blob {
- filename = UBOOT_NODTB;
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for J721E Board";
};
fdt-0 {
diff --git a/arch/arm/dts/k3-j721s2-binman.dtsi b/arch/arm/dts/k3-j721s2-binman.dtsi
index 5bca4e94ec..3922007b3b 100644
--- a/arch/arm/dts/k3-j721s2-binman.dtsi
+++ b/arch/arm/dts/k3-j721s2-binman.dtsi
@@ -141,11 +141,9 @@
#ifdef CONFIG_TARGET_J721S2_A72_EVM
-#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_J721S2_EVM_DTB "spl/dts/k3-j721s2-common-proc-board.dtb"
#define SPL_AM68_SK_DTB "spl/dts/k3-am68-sk-base-board.dtb"
-#define UBOOT_NODTB "u-boot-nodtb.bin"
#define J721S2_EVM_DTB "u-boot.dtb"
#define AM68_SK_DTB "arch/arm/dts/k3-am68-sk-base-board.dtb"
@@ -157,55 +155,11 @@
};
};
ti-spl {
- filename = "tispl.bin";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- ti-secure {
- content = <&atf>;
- keyfile = "custMpk.pem";
- };
- atf: atf-bl31 {
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- ti-secure {
- content = <&tee>;
- keyfile = "custMpk.pem";
- };
- tee: tee-os {
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
ti-secure {
content = <&dm>;
keyfile = "custMpk.pem";
@@ -215,23 +169,6 @@
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_spl_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_spl_nodtb: blob-ext {
- filename = SPL_NODTB;
- };
- };
-
fdt-0 {
description = "k3-j721s2-common-proc-board";
type = "flat_dt";
@@ -285,29 +222,12 @@
&binman {
u-boot {
- filename = "u-boot.img";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for J721S2 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- ti-secure {
- content = <&u_boot_nodtb>;
- keyfile = "custMpk.pem";
- };
- u_boot_nodtb: u-boot-nodtb {
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for J721S2 Board";
};
fdt-0 {
@@ -371,67 +291,16 @@
&binman {
ti-spl_unsigned {
- filename = "tispl.bin_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&ti_spl_unsigned_template>;
fit {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
-
images {
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- os = "arm-trusted-firmware";
- load = <CONFIG_K3_ATF_LOAD_ADDR>;
- entry = <CONFIG_K3_ATF_LOAD_ADDR>;
- atf-bl31 {
- filename = "bl31.bin";
- };
- };
-
- tee {
- description = "OP-TEE";
- type = "tee";
- arch = "arm64";
- compression = "none";
- os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
- tee-os {
- filename = "tee-raw.bin";
- };
- };
-
dm {
- description = "DM binary";
- type = "firmware";
- arch = "arm32";
- compression = "none";
- os = "DM";
- load = <0x89000000>;
- entry = <0x89000000>;
blob-ext {
filename = "ti-dm.bin";
};
};
- spl {
- description = "SPL (64-bit)";
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_SPL_TEXT_BASE>;
- entry = <CONFIG_SPL_TEXT_BASE>;
- blob {
- filename = "spl/u-boot-spl-nodtb.bin";
- };
- };
-
fdt-0 {
description = "k3-j721s2-common-proc-board";
type = "flat_dt";
@@ -475,26 +344,12 @@
&binman {
u-boot_unsigned {
- filename = "u-boot.img_unsigned";
- pad-byte = <0xff>;
+ insert-template = <&u_boot_unsigned_template>;
fit {
- description = "FIT image with multiple configurations";
-
images {
uboot {
- description = "U-Boot for J721S2 board";
- type = "firmware";
- os = "u-boot";
- arch = "arm";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
- blob {
- filename = UBOOT_NODTB;
- };
- hash {
- algo = "crc32";
- };
+ description = "U-Boot for J721S2 Board";
};
fdt-0 {
--
2.34.1
More information about the U-Boot
mailing list