[PATCH 0/2] Conclusive WHLE-LS1046A support
Artur Rojek
artur at conclusive.pl
Thu Nov 16 14:16:28 CET 2023
Hi all,
this series adds support for Conclusive WHLE-LS1046A, a QorIQ LS1046A
SoC based Single Board Computer by Conclusive Engineering.
Patch [1/2] adds support for storing U-Boot environment on an ext4
partition of MMC. This is required for whle_ls1046a_emmc_defconfig.
Patch [2/2] introduces support for Conclusive WHLE-LS1046A, including
board init and Device Tree files. This board offers two boot methods,
over QSPI and eMMC, with their respective defconfigs being provided.
Artur Rojek (1):
board: Add support for Conclusive WHLE-LS1046A
Jakub Klama (1):
armv8: layerscape: Enable ext4 environment storage
arch/arm/Kconfig | 19 ++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 5 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/fsl-ls1046a-whle.dts | 208 ++++++++++++++++++
board/conclusive/whle-ls1046a/Kconfig | 15 ++
board/conclusive/whle-ls1046a/MAINTAINERS | 9 +
board/conclusive/whle-ls1046a/Makefile | 7 +
board/conclusive/whle-ls1046a/ddr.c | 21 ++
board/conclusive/whle-ls1046a/eth.c | 64 ++++++
board/conclusive/whle-ls1046a/whle-ls1046a.c | 218 +++++++++++++++++++
configs/whle_ls1046a_emmc_defconfig | 82 +++++++
configs/whle_ls1046a_qspi_defconfig | 83 +++++++
include/configs/whle_ls1046a.h | 90 ++++++++
13 files changed, 822 insertions(+)
create mode 100644 arch/arm/dts/fsl-ls1046a-whle.dts
create mode 100644 board/conclusive/whle-ls1046a/Kconfig
create mode 100644 board/conclusive/whle-ls1046a/MAINTAINERS
create mode 100644 board/conclusive/whle-ls1046a/Makefile
create mode 100644 board/conclusive/whle-ls1046a/ddr.c
create mode 100644 board/conclusive/whle-ls1046a/eth.c
create mode 100644 board/conclusive/whle-ls1046a/whle-ls1046a.c
create mode 100644 configs/whle_ls1046a_emmc_defconfig
create mode 100644 configs/whle_ls1046a_qspi_defconfig
create mode 100644 include/configs/whle_ls1046a.h
--
2.42.1
More information about the U-Boot
mailing list