[PATCH v2] drivers: pcie_xilinx: Fix "reg" not found error
mchitale at ventanamicro.com
mchitale at ventanamicro.com
Thu Nov 16 14:29:27 CET 2023
On Mon, 2023-11-13 at 09:10 +0100, Michal Simek wrote:
>
> On 11/11/23 18:36, Mayuresh Chitale wrote:
> > Fix the driver to use the dev_read_addr_size API to fetch the reg
> > property from the DT.
> >
> > Signed-off-by: Mayuresh Chitale <mchitale at ventanamicro.com>
> > ---
> > Changes in v2:
> > ====
> > - Remove global_data.h from include
> > - Use devm_ioremap instead of map_phsymem
> >
> > drivers/pci/pcie_xilinx.c | 26 +++++++++-----------------
> > 1 file changed, 9 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c
> > index 53fd121e90..c1f5bbbb1b 100644
> > --- a/drivers/pci/pcie_xilinx.c
> > +++ b/drivers/pci/pcie_xilinx.c
> > @@ -8,11 +8,9 @@
> > #include <common.h>
> > #include <dm.h>
> > #include <pci.h>
> > -#include <asm/global_data.h>
> > #include <linux/bitops.h>
> > #include <linux/printk.h>
> > -
> > -#include <asm/io.h>
> > +#include <linux/io.h>
> >
> > /**
> > * struct xilinx_pcie - Xilinx PCIe controller state
> > @@ -140,20 +138,14 @@ static int pcie_xilinx_write_config(struct
> > udevice *bus, pci_dev_t bdf,
> > static int pcie_xilinx_of_to_plat(struct udevice *dev)
> > {
> > struct xilinx_pcie *pcie = dev_get_priv(dev);
> > - struct fdt_resource reg_res;
> > - DECLARE_GLOBAL_DATA_PTR;
> > - int err;
> > -
> > - err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg",
> > - 0, ®_res);
> > - if (err < 0) {
> > - pr_err("\"reg\" resource not found\n");
> > - return err;
> > - }
> > -
> > - pcie->cfg_base = map_physmem(reg_res.start,
> > - fdt_resource_size(®_res),
> > - MAP_NOCACHE);
> > + fdt_addr_t addr;
> > + fdt_size_t size;
> > +
> > + addr = dev_read_addr_size(dev, &size);
> > + if (addr == FDT_ADDR_T_NONE)
> > + return -EINVAL;
> > +
> > + pcie->cfg_base = devm_ioremap(dev, addr, size);
>
> this can also fail.
>
> Just put there.
> if (IS_ERR(pcie->cfg_base))
> return PTR_ERR(pcie->cfg_base);
Ok.
>
> M
More information about the U-Boot
mailing list