[PATCH v2 2/7] acpi: carve out qfw_acpi.c
Heinrich Schuchardt
heinrich.schuchardt at canonical.com
Tue Nov 21 16:27:35 CET 2023
Move the code related to copying tables from QEMU to a separate code
module.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
---
v2:
new patch
---
drivers/misc/Makefile | 1 +
drivers/misc/qfw.c | 240 -------------------------------------
drivers/misc/qfw_acpi.c | 256 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 257 insertions(+), 240 deletions(-)
create mode 100644 drivers/misc/qfw_acpi.c
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index b67b82358a..cda701d38e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o
obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
ifdef CONFIG_QFW
obj-y += qfw.o
+obj-$(CONFIG_QFW_ACPI) += qfw_acpi.o
obj-$(CONFIG_QFW_PIO) += qfw_pio.o
obj-$(CONFIG_QFW_MMIO) += qfw_mmio.o
obj-$(CONFIG_SANDBOX) += qfw_sandbox.o
diff --git a/drivers/misc/qfw.c b/drivers/misc/qfw.c
index 307334faf4..db98619fdf 100644
--- a/drivers/misc/qfw.c
+++ b/drivers/misc/qfw.c
@@ -21,246 +21,6 @@
#include <tables_csum.h>
#include <asm/acpi_table.h>
-#ifdef QFW_ACPI
-/*
- * This function allocates memory for ACPI tables
- *
- * @entry : BIOS linker command entry which tells where to allocate memory
- * (either high memory or low memory)
- * @addr : The address that should be used for low memory allcation. If the
- * memory allocation request is 'ZONE_HIGH' then this parameter will
- * be ignored.
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_allocate(struct udevice *dev,
- struct bios_linker_entry *entry, ulong *addr)
-{
- uint32_t size, align;
- struct fw_file *file;
- unsigned long aligned_addr;
-
- align = le32_to_cpu(entry->alloc.align);
- /* align must be power of 2 */
- if (align & (align - 1)) {
- printf("error: wrong alignment %u\n", align);
- return -EINVAL;
- }
-
- file = qfw_find_file(dev, entry->alloc.file);
- if (!file) {
- printf("error: can't find file %s\n", entry->alloc.file);
- return -ENOENT;
- }
-
- size = be32_to_cpu(file->cfg.size);
-
- /*
- * ZONE_HIGH means we need to allocate from high memory, since
- * malloc space is already at the end of RAM, so we directly use it.
- * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
- * in which is low memory
- */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
- aligned_addr = (unsigned long)memalign(align, size);
- if (!aligned_addr) {
- printf("error: allocating resource\n");
- return -ENOMEM;
- }
- if (aligned_addr < gd->arch.table_start_high)
- gd->arch.table_start_high = aligned_addr;
- if (aligned_addr + size > gd->arch.table_end_high)
- gd->arch.table_end_high = aligned_addr + size;
-
- } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
- aligned_addr = ALIGN(*addr, align);
- } else {
- printf("error: invalid allocation zone\n");
- return -EINVAL;
- }
-
- debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
- file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
-
- qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size,
- (void *)aligned_addr);
- file->addr = aligned_addr;
-
- /* adjust address for low memory allocation */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
- *addr = (aligned_addr + size);
-
- return 0;
-}
-
-/*
- * This function patches ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells how to patch
- * ACPI tables
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_pointer(struct udevice *dev,
- struct bios_linker_entry *entry)
-{
- struct fw_file *dest, *src;
- uint32_t offset = le32_to_cpu(entry->pointer.offset);
- uint64_t pointer = 0;
-
- dest = qfw_find_file(dev, entry->pointer.dest_file);
- if (!dest || !dest->addr)
- return -ENOENT;
- src = qfw_find_file(dev, entry->pointer.src_file);
- if (!src || !src->addr)
- return -ENOENT;
-
- debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
- dest->addr, src->addr, offset, entry->pointer.size, pointer);
-
- memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
- pointer = le64_to_cpu(pointer);
- pointer += (unsigned long)src->addr;
- pointer = cpu_to_le64(pointer);
- memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
-
- return 0;
-}
-
-/*
- * This function updates checksum fields of ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells where to update ACPI table
- * checksums
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_checksum(struct udevice *dev,
- struct bios_linker_entry *entry)
-{
- struct fw_file *file;
- uint8_t *data, cksum = 0;
- uint8_t *cksum_start;
-
- file = qfw_find_file(dev, entry->cksum.file);
- if (!file || !file->addr)
- return -ENOENT;
-
- data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
- cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
- cksum = table_compute_checksum(cksum_start,
- le32_to_cpu(entry->cksum.length));
- *data = cksum;
-
- return 0;
-}
-
-/* This function loads and patches ACPI tables provided by QEMU */
-ulong write_acpi_tables(ulong addr)
-{
- int i, ret;
- struct fw_file *file;
- struct bios_linker_entry *table_loader;
- struct bios_linker_entry *entry;
- uint32_t size;
- struct udevice *dev;
-
- ret = qfw_get_dev(&dev);
- if (ret) {
- printf("error: no qfw\n");
- return addr;
- }
-
- /* make sure fw_list is loaded */
- ret = qfw_read_firmware_list(dev);
- if (ret) {
- printf("error: can't read firmware file list\n");
- return addr;
- }
-
- file = qfw_find_file(dev, "etc/table-loader");
- if (!file) {
- printf("error: can't find etc/table-loader\n");
- return addr;
- }
-
- size = be32_to_cpu(file->cfg.size);
- if ((size % sizeof(*entry)) != 0) {
- printf("error: table-loader maybe corrupted\n");
- return addr;
- }
-
- table_loader = malloc(size);
- if (!table_loader) {
- printf("error: no memory for table-loader\n");
- return addr;
- }
-
- /* QFW always puts tables at high addresses */
- gd->arch.table_start_high = (ulong)table_loader;
- gd->arch.table_end_high = (ulong)table_loader;
-
- qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size, table_loader);
-
- for (i = 0; i < (size / sizeof(*entry)); i++) {
- entry = table_loader + i;
- switch (le32_to_cpu(entry->command)) {
- case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
- ret = bios_linker_allocate(dev, entry, &addr);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
- ret = bios_linker_add_pointer(dev, entry);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
- ret = bios_linker_add_checksum(dev, entry);
- if (ret)
- goto out;
- break;
- default:
- break;
- }
- }
-
-out:
- if (ret) {
- struct fw_cfg_file_iter iter;
- for (file = qfw_file_iter_init(dev, &iter);
- !qfw_file_iter_end(&iter);
- file = qfw_file_iter_next(&iter)) {
- if (file->addr) {
- free((void *)file->addr);
- file->addr = 0;
- }
- }
- }
-
- free(table_loader);
-
- gd_set_acpi_start(acpi_get_rsdp_addr());
-
- return addr;
-}
-
-ulong acpi_get_rsdp_addr(void)
-{
- int ret;
- struct fw_file *file;
- struct udevice *dev;
-
- ret = qfw_get_dev(&dev);
- if (ret) {
- printf("error: no qfw\n");
- return 0;
- }
-
- file = qfw_find_file(dev, "etc/acpi/rsdp");
- return file->addr;
-}
-#endif /* QFW_ACPI */
-
static void qfw_read_entry_io(struct qfw_dev *qdev, u16 entry, u32 size,
void *address)
{
diff --git a/drivers/misc/qfw_acpi.c b/drivers/misc/qfw_acpi.c
new file mode 100644
index 0000000000..6e14b2a504
--- /dev/null
+++ b/drivers/misc/qfw_acpi.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest at gmail.com>
+ * (C) Copyright 2021 Asherah Connor <ashe at kivikakk.ee>
+ */
+
+#define LOG_CATEGORY UCLASS_QFW
+
+#include <acpi/acpi_table.h>
+#include <errno.h>
+#include <malloc.h>
+#include <qfw.h>
+#include <tables_csum.h>
+#include <stdio.h>
+#include <asm/byteorder.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function allocates memory for ACPI tables
+ *
+ * @entry : BIOS linker command entry which tells where to allocate memory
+ * (either high memory or low memory)
+ * @addr : The address that should be used for low memory allcation. If the
+ * memory allocation request is 'ZONE_HIGH' then this parameter will
+ * be ignored.
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_allocate(struct udevice *dev,
+ struct bios_linker_entry *entry, ulong *addr)
+{
+ uint32_t size, align;
+ struct fw_file *file;
+ unsigned long aligned_addr;
+
+ align = le32_to_cpu(entry->alloc.align);
+ /* align must be power of 2 */
+ if (align & (align - 1)) {
+ printf("error: wrong alignment %u\n", align);
+ return -EINVAL;
+ }
+
+ file = qfw_find_file(dev, entry->alloc.file);
+ if (!file) {
+ printf("error: can't find file %s\n", entry->alloc.file);
+ return -ENOENT;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+
+ /*
+ * ZONE_HIGH means we need to allocate from high memory, since
+ * malloc space is already at the end of RAM, so we directly use it.
+ * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
+ * in which is low memory
+ */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
+ aligned_addr = (unsigned long)memalign(align, size);
+ if (!aligned_addr) {
+ printf("error: allocating resource\n");
+ return -ENOMEM;
+ }
+ if (aligned_addr < gd->arch.table_start_high)
+ gd->arch.table_start_high = aligned_addr;
+ if (aligned_addr + size > gd->arch.table_end_high)
+ gd->arch.table_end_high = aligned_addr + size;
+
+ } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
+ aligned_addr = ALIGN(*addr, align);
+ } else {
+ printf("error: invalid allocation zone\n");
+ return -EINVAL;
+ }
+
+ debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
+ file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
+
+ qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size,
+ (void *)aligned_addr);
+ file->addr = aligned_addr;
+
+ /* adjust address for low memory allocation */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
+ *addr = (aligned_addr + size);
+
+ return 0;
+}
+
+/*
+ * This function patches ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells how to patch
+ * ACPI tables
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_pointer(struct udevice *dev,
+ struct bios_linker_entry *entry)
+{
+ struct fw_file *dest, *src;
+ uint32_t offset = le32_to_cpu(entry->pointer.offset);
+ uint64_t pointer = 0;
+
+ dest = qfw_find_file(dev, entry->pointer.dest_file);
+ if (!dest || !dest->addr)
+ return -ENOENT;
+ src = qfw_find_file(dev, entry->pointer.src_file);
+ if (!src || !src->addr)
+ return -ENOENT;
+
+ debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
+ dest->addr, src->addr, offset, entry->pointer.size, pointer);
+
+ memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
+ pointer = le64_to_cpu(pointer);
+ pointer += (unsigned long)src->addr;
+ pointer = cpu_to_le64(pointer);
+ memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
+
+ return 0;
+}
+
+/*
+ * This function updates checksum fields of ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells where to update ACPI table
+ * checksums
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_checksum(struct udevice *dev,
+ struct bios_linker_entry *entry)
+{
+ struct fw_file *file;
+ uint8_t *data, cksum = 0;
+ uint8_t *cksum_start;
+
+ file = qfw_find_file(dev, entry->cksum.file);
+ if (!file || !file->addr)
+ return -ENOENT;
+
+ data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
+ cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
+ cksum = table_compute_checksum(cksum_start,
+ le32_to_cpu(entry->cksum.length));
+ *data = cksum;
+
+ return 0;
+}
+
+/* This function loads and patches ACPI tables provided by QEMU */
+ulong write_acpi_tables(ulong addr)
+{
+ int i, ret;
+ struct fw_file *file;
+ struct bios_linker_entry *table_loader;
+ struct bios_linker_entry *entry;
+ uint32_t size;
+ struct udevice *dev;
+
+ ret = qfw_get_dev(&dev);
+ if (ret) {
+ printf("error: no qfw\n");
+ return addr;
+ }
+
+ /* make sure fw_list is loaded */
+ ret = qfw_read_firmware_list(dev);
+ if (ret) {
+ printf("error: can't read firmware file list\n");
+ return addr;
+ }
+
+ file = qfw_find_file(dev, "etc/table-loader");
+ if (!file) {
+ printf("error: can't find etc/table-loader\n");
+ return addr;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+ if ((size % sizeof(*entry)) != 0) {
+ printf("error: table-loader maybe corrupted\n");
+ return addr;
+ }
+
+ table_loader = malloc(size);
+ if (!table_loader) {
+ printf("error: no memory for table-loader\n");
+ return addr;
+ }
+
+ /* QFW always puts tables at high addresses */
+ gd->arch.table_start_high = (ulong)table_loader;
+ gd->arch.table_end_high = (ulong)table_loader;
+
+ qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size, table_loader);
+
+ for (i = 0; i < (size / sizeof(*entry)); i++) {
+ entry = table_loader + i;
+ switch (le32_to_cpu(entry->command)) {
+ case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
+ ret = bios_linker_allocate(dev, entry, &addr);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
+ ret = bios_linker_add_pointer(dev, entry);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
+ ret = bios_linker_add_checksum(dev, entry);
+ if (ret)
+ goto out;
+ break;
+ default:
+ break;
+ }
+ }
+
+out:
+ if (ret) {
+ struct fw_cfg_file_iter iter;
+ for (file = qfw_file_iter_init(dev, &iter);
+ !qfw_file_iter_end(&iter);
+ file = qfw_file_iter_next(&iter)) {
+ if (file->addr) {
+ free((void *)file->addr);
+ file->addr = 0;
+ }
+ }
+ }
+
+ free(table_loader);
+
+ gd_set_acpi_start(acpi_get_rsdp_addr());
+
+ return addr;
+}
+
+ulong acpi_get_rsdp_addr(void)
+{
+ int ret;
+ struct fw_file *file;
+ struct udevice *dev;
+
+ ret = qfw_get_dev(&dev);
+ if (ret) {
+ printf("error: no qfw\n");
+ return 0;
+ }
+
+ file = qfw_find_file(dev, "etc/acpi/rsdp");
+ return file->addr;
+}
--
2.40.1
More information about the U-Boot
mailing list