[PATCH 18/21] dts: msm8916: import DT from Linux
Caleb Connolly
caleb.connolly at linaro.org
Tue Nov 21 18:09:41 CET 2023
Import the msm8916 devicetree from Linux and adjust the dragonboard410c
devicetree to use it.
Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
arch/arm/dts/dragonboard410c-uboot.dtsi | 44 -
arch/arm/dts/dragonboard410c.dts | 198 +-
arch/arm/dts/msm8916-pins.dtsi | 582 ++++++
arch/arm/dts/msm8916-pm8916.dtsi | 76 +
arch/arm/dts/msm8916.dtsi | 2194 +++++++++++++++++++++++
arch/arm/dts/pm8916.dtsi | 183 ++
include/dt-bindings/arm/coresight-cti-dt.h | 37 +
include/dt-bindings/clock/qcom,rpmcc.h | 174 ++
include/dt-bindings/interconnect/qcom,msm8916.h | 100 ++
include/dt-bindings/reset/qcom,gcc-msm8916.h | 100 ++
10 files changed, 3484 insertions(+), 204 deletions(-)
diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi b/arch/arm/dts/dragonboard410c-uboot.dtsi
deleted file mode 100644
index cec64bf80f99..000000000000
--- a/arch/arm/dts/dragonboard410c-uboot.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * U-Boot addition to handle Dragonboard 410c pins
- *
- * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
- */
-
-/ {
-
- smem {
- bootph-all;
- };
-
- soc {
- bootph-all;
-
- pinctrl at 1000000 {
- bootph-all;
-
- uart {
- bootph-all;
- };
- };
-
- qcom,gcc at 1800000 {
- bootph-all;
- };
-
- serial at 78b0000 {
- bootph-all;
- };
- };
-};
-
-
-&pm8916_gpios {
- usb_hub_reset_pm {
- gpios = <&pm8916_gpios 2 0>;
- };
-
- usb_sw_sel_pm {
- gpios = <&pm8916_gpios 3 0>;
- };
-};
diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
index a42b68fee8c0..8933c64e56e5 100644
--- a/arch/arm/dts/dragonboard410c.dts
+++ b/arch/arm/dts/dragonboard410c.dts
@@ -7,193 +7,40 @@
/dts-v1/;
-#include "skeleton64.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "msm8916-pm8916.dtsi"
+
/ {
model = "Qualcomm Technologies, Inc. Dragonboard 410c";
compatible = "qcom,apq8016-sbc", "qcom,apq8016";
qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>;
qcom,board-id = <0x10018 0x0>;
- #address-cells = <0x2>;
- #size-cells = <0x2>;
aliases {
usb0 = "/soc/ehci at 78d9000";
+ serial0 = &blsp1_uart2;
};
- memory {
+ memory at 80000000 {
device_type = "memory";
reg = <0 0x80000000 0 0x3da00000>;
};
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- smem_mem: smem_region at 86300000 {
- reg = <0x0 0x86300000 0x0 0x100000>;
- no-map;
- };
- };
-
chosen {
stdout-path = "/soc/serial at 78b0000";
};
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_mem>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- };
-
- soc {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges = <0x0 0x0 0x0 0xffffffff>;
- compatible = "simple-bus";
-
- rpm_msg_ram: memory at 60000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0x60000 0x8000>;
- };
-
- soc_gpios: pinctrl at 1000000 {
- compatible = "qcom,msm8916-pinctrl";
- reg = <0x1000000 0x400000>;
- gpio-controller;
- gpio-count = <122>;
- gpio-bank-name="soc";
- #gpio-cells = <2>;
-
- blsp1_uart: uart {
- function = "blsp1_uart";
- pins = "GPIO_4", "GPIO_5";
- drive-strength = <8>;
- bias-disable;
- };
- };
- clkc: qcom,gcc at 1800000 {
- compatible = "qcom,gcc-msm8916";
- reg = <0x1800000 0x80000>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- #clock-cells = <0x1>;
- };
-
- serial at 78b0000 {
- compatible = "qcom,msm-uartdm-v1.4";
- reg = <0x78b0000 0x200>;
- clocks = <&clkc 4>;
- clock-names = "core";
- pinctrl-names = "uart";
- pinctrl-0 = <&blsp1_uart>;
- };
-
- ehci at 78d9000 {
- compatible = "qcom,ci-hdrc";
- reg = <0x78d9000 0x400>;
- phys = <&ehci_phy>;
- };
-
- ehci_phy: ehci_phy at 78d9000 {
- compatible = "qcom,usb-hs-phy-msm8916";
- reg = <0x78d9000 0x400>;
- #phy-cells = <0>;
- };
-
- sdhci at 07824000 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x7824900 0x11c 0x7824000 0x800>;
- bus-width = <0x8>;
- index = <0x0>;
- non-removable;
- clock = <&clkc 0>;
- clock-frequency = <100000000>;
- };
-
- sdhci at 07864000 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x7864900 0x11c 0x7864000 0x800>;
- index = <0x1>;
- bus-width = <0x4>;
- clock = <&clkc 1>;
- clock-frequency = <200000000>;
- cd-gpios = <&soc_gpios 38 GPIO_ACTIVE_LOW>;
- };
-
- wcnss {
- bt {
- compatible="qcom,wcnss-bt";
- };
-
- wifi {
- compatible="qcom,wcnss-wlan";
- };
- };
-
- spmi_bus: spmi at 200f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0200f000 0x001000>,
- <0x02400000 0x400000>,
- <0x02c00000 0x400000>,
- <0x03800000 0x200000>,
- <0x0200a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- pmic0: pm8916 at 0 {
- compatible = "qcom,spmi-pmic";
- reg = <0x0 0x1>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
-
- pon at 800 {
- compatible = "qcom,pm8916-pon";
- reg = <0x800 0x100>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- pwrkey {
- compatible = "qcom,pm8941-pwrkey";
- debounce = <15625>;
- bias-pull-up;
- };
-
- pm8916_resin: resin {
- compatible = "qcom,pm8941-resin";
- debounce = <15625>;
- bias-pull-up;
- };
- };
-
- pm8916_gpios: pm8916_gpios at c000 {
- compatible = "qcom,pm8916-gpio";
- reg = <0xc000 0x400>;
- gpio-controller;
- gpio-ranges = <&pm8916_gpios 0 0 4>;
- #gpio-cells = <2>;
- };
- };
-
- pmic1: pm8916 at 1 {
- compatible = "qcom,spmi-pmic";
- reg = <0x1 0x1>;
- };
- };
- };
-
leds {
compatible = "gpio-leds";
user1 {
label = "green:user1";
- gpios = <&soc_gpios 21 0>;
+ gpios = <&msmgpio 21 0>;
};
user2 {
label = "green:user2";
- gpios = <&soc_gpios 120 0>;
+ gpios = <&msmgpio 120 0>;
};
user3 {
@@ -208,4 +55,35 @@
};
};
-#include "dragonboard410c-uboot.dtsi"
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pm8916_gpios {
+ usb_hub_reset_pm {
+ gpios = <&pm8916_gpios 2 0>;
+ };
+
+ usb_sw_sel_pm {
+ gpios = <&pm8916_gpios 3 0>;
+ };
+};
+
+&pm8916_resin {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+ clock-frequency = <100000000>;
+};
+
+&sdhc_2 {
+ status = "okay";
+ cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+ clock-frequency = <200000000>;
+};
+
+&usb {
+ status = "okay";
+};
diff --git a/arch/arm/dts/msm8916-pins.dtsi b/arch/arm/dts/msm8916-pins.dtsi
new file mode 100644
index 000000000000..33dfcf318a81
--- /dev/null
+++ b/arch/arm/dts/msm8916-pins.dtsi
@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ */
+
+&msmgpio {
+
+ blsp1_uart1_default: blsp1-uart1-default-state {
+ /* TX, RX, CTS_N, RTS_N */
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "blsp_uart1";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp1_uart2_default: blsp1-uart2-default-state {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+ pins = "gpio4", "gpio5";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ spi1_default: spi1-default-state {
+ spi-pins {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
+
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio2";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi1_sleep: spi1-sleep-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ spi2_default: spi2-default-state {
+ spi-pins {
+ pins = "gpio4", "gpio5", "gpio7";
+ function = "blsp_spi2";
+
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio6";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi2_sleep: spi2-sleep-state {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ spi3_default: spi3-default-state {
+ spi-pins {
+ pins = "gpio8", "gpio9", "gpio11";
+ function = "blsp_spi3";
+
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio10";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi3_sleep: spi3-sleep-state {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ spi4_default: spi4-default-state {
+ spi-pins {
+ pins = "gpio12", "gpio13", "gpio15";
+ function = "blsp_spi4";
+
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio14";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi4_sleep: spi4-sleep-state {
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ spi5_default: spi5-default-state {
+ spi-pins {
+ pins = "gpio16", "gpio17", "gpio19";
+ function = "blsp_spi5";
+
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio18";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi5_sleep: spi5-sleep-state {
+ pins = "gpio16", "gpio17", "gpio18", "gpio19";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ spi6_default: spi6-default-state {
+ spi-pins {
+ pins = "gpio20", "gpio21", "gpio23";
+ function = "blsp_spi6";
+
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio22";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi6_sleep: spi6-sleep-state {
+ pins = "gpio20", "gpio21", "gpio22", "gpio23";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ i2c1_default: i2c1-default-state {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c1_sleep: i2c1-sleep-state {
+ pins = "gpio2", "gpio3";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c2_default: i2c2-default-state {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c2_sleep: i2c2-sleep-state {
+ pins = "gpio6", "gpio7";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c3_default: i2c3-default-state {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c3_sleep: i2c3-sleep-state {
+ pins = "gpio10", "gpio11";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c4_default: i2c4-default-state {
+ pins = "gpio14", "gpio15";
+ function = "blsp_i2c4";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c4_sleep: i2c4-sleep-state {
+ pins = "gpio14", "gpio15";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c5_default: i2c5-default-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp_i2c5";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c5_sleep: i2c5-sleep-state {
+ pins = "gpio18", "gpio19";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c6_default: i2c6-default-state {
+ pins = "gpio22", "gpio23";
+ function = "blsp_i2c6";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c6_sleep: i2c6-sleep-state {
+ pins = "gpio22", "gpio23";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pmx-sdc1-clk-state {
+ sdc1_clk_on: clk-on-pins {
+ pins = "sdc1_clk";
+
+ bias-disable;
+ drive-strength = <16>;
+ };
+ sdc1_clk_off: clk-off-pins {
+ pins = "sdc1_clk";
+
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ pmx-sdc1-cmd-state {
+ sdc1_cmd_on: cmd-on-pins {
+ pins = "sdc1_cmd";
+
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ sdc1_cmd_off: cmd-off-pins {
+ pins = "sdc1_cmd";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ pmx-sdc1-data-state {
+ sdc1_data_on: data-on-pins {
+ pins = "sdc1_data";
+
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ sdc1_data_off: data-off-pins {
+ pins = "sdc1_data";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ pmx-sdc2-clk-state {
+ sdc2_clk_on: clk-on-pins {
+ pins = "sdc2_clk";
+
+ bias-disable;
+ drive-strength = <16>;
+ };
+ sdc2_clk_off: clk-off-pins {
+ pins = "sdc2_clk";
+
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ pmx-sdc2-cmd-state {
+ sdc2_cmd_on: cmd-on-pins {
+ pins = "sdc2_cmd";
+
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ sdc2_cmd_off: cmd-off-pins {
+ pins = "sdc2_cmd";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ pmx-sdc2-data-state {
+ sdc2_data_on: data-on-pins {
+ pins = "sdc2_data";
+
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ sdc2_data_off: data-off-pins {
+ pins = "sdc2_data";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ pmx-sdc2-cd-pin-state {
+ sdc2_cd_on: cd-on-pins {
+ pins = "gpio38";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ sdc2_cd_off: cd-off-pins {
+ pins = "gpio38";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ cdc-pdm-lines-state {
+ cdc_pdm_lines_act: pdm-lines-on-pins {
+ pins = "gpio63", "gpio64", "gpio65", "gpio66",
+ "gpio67", "gpio68";
+ function = "cdc_pdm0";
+
+ drive-strength = <8>;
+ bias-disable;
+ };
+ cdc_pdm_lines_sus: pdm-lines-off-pins {
+ pins = "gpio63", "gpio64", "gpio65", "gpio66",
+ "gpio67", "gpio68";
+ function = "cdc_pdm0";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ ext-pri-tlmm-lines-state {
+ ext_pri_tlmm_lines_act: ext-pa-on-pins {
+ pins = "gpio113", "gpio114", "gpio115", "gpio116";
+ function = "pri_mi2s";
+
+ drive-strength = <8>;
+ bias-disable;
+ };
+ ext_pri_tlmm_lines_sus: ext-pa-off-pins {
+ pins = "gpio113", "gpio114", "gpio115", "gpio116";
+ function = "pri_mi2s";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ ext-pri-ws-line-state {
+ ext_pri_ws_act: ext-pa-on-pins {
+ pins = "gpio110";
+ function = "pri_mi2s_ws";
+
+ drive-strength = <8>;
+ bias-disable;
+ };
+ ext_pri_ws_sus: ext-pa-off-pins {
+ pins = "gpio110";
+ function = "pri_mi2s_ws";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ ext-mclk-tlmm-lines-state {
+ ext_mclk_tlmm_lines_act: mclk-lines-on-pins {
+ pins = "gpio116";
+ function = "pri_mi2s";
+
+ drive-strength = <8>;
+ bias-disable;
+ };
+ ext_mclk_tlmm_lines_sus: mclk-lines-off-pins {
+ pins = "gpio116";
+ function = "pri_mi2s";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ /* secondary Mi2S */
+ ext-sec-tlmm-lines-state {
+ ext_sec_tlmm_lines_act: tlmm-lines-on-pins {
+ pins = "gpio112", "gpio117", "gpio118", "gpio119";
+ function = "sec_mi2s";
+
+ drive-strength = <8>;
+ bias-disable;
+ };
+ ext_sec_tlmm_lines_sus: tlmm-lines-off-pins {
+ pins = "gpio112", "gpio117", "gpio118", "gpio119";
+ function = "sec_mi2s";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ cdc_dmic_lines_act: cdc-dmic-lines-on-state {
+ clk-pins {
+ pins = "gpio0";
+ function = "dmic0_clk";
+
+ drive-strength = <8>;
+ };
+ data-pins {
+ pins = "gpio1";
+ function = "dmic0_data";
+
+ drive-strength = <8>;
+ };
+ };
+ cdc_dmic_lines_sus: cdc-dmic-lines-off-state {
+ clk-pins {
+ pins = "gpio0";
+ function = "dmic0_clk";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ data-pins {
+ pins = "gpio1";
+ function = "dmic0_data";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ wcnss_pin_a: wcnss-active-state {
+ pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "wcss_wlan";
+
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ cci0_default: cci0-default-state {
+ pins = "gpio29", "gpio30";
+ function = "cci_i2c";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ camera_front_default: camera-front-default-state {
+ pwdn-pins {
+ pins = "gpio33";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+ rst-pins {
+ pins = "gpio28";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+ mclk1-pins {
+ pins = "gpio27";
+ function = "cam_mclk1";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_rear_default: camera-rear-default-state {
+ pwdn-pins {
+ pins = "gpio34";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+ rst-pins {
+ pins = "gpio35";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+ mclk0-pins {
+ pins = "gpio26";
+ function = "cam_mclk0";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+};
diff --git a/arch/arm/dts/msm8916-pm8916.dtsi b/arch/arm/dts/msm8916-pm8916.dtsi
new file mode 100644
index 000000000000..6eb5e0a39510
--- /dev/null
+++ b/arch/arm/dts/msm8916-pm8916.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916.dtsi"
+#include "pm8916.dtsi"
+
+&camss {
+ vdda-supply = <&pm8916_l2>;
+};
+
+&dsi0 {
+ vdda-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+};
+
+&dsi_phy0 {
+ vddio-supply = <&pm8916_l6>;
+};
+
+&mpss {
+ pll-supply = <&pm8916_l7>;
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8916_l8>;
+ vqmmc-supply = <&pm8916_l5>;
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8916_l11>;
+ vqmmc-supply = <&pm8916_l12>;
+};
+
+&usb_hs_phy {
+ v1p8-supply = <&pm8916_l7>;
+ v3p3-supply = <&pm8916_l13>;
+};
+
+&wcnss {
+ vddpx-supply = <&pm8916_l7>;
+};
+
+&wcnss_iris {
+ vddxo-supply = <&pm8916_l7>;
+ vddrfa-supply = <&pm8916_s3>;
+ vddpa-supply = <&pm8916_l9>;
+ vdddig-supply = <&pm8916_l5>;
+};
+
+&rpm_requests {
+ smd_rpm_regulators: regulators {
+ compatible = "qcom,rpm-pm8916-regulators";
+
+ /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
+ pm8916_s3: s3 {};
+ pm8916_s4: s4 {};
+
+ pm8916_l1: l1 {};
+ pm8916_l2: l2 {};
+ /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */
+ pm8916_l4: l4 {};
+ pm8916_l5: l5 {};
+ pm8916_l6: l6 {};
+ pm8916_l7: l7 {};
+ pm8916_l8: l8 {};
+ pm8916_l9: l9 {};
+ pm8916_l10: l10 {};
+ pm8916_l11: l11 {};
+ pm8916_l12: l12 {};
+ pm8916_l13: l13 {};
+ pm8916_l14: l14 {};
+ pm8916_l15: l15 {};
+ pm8916_l16: l16 {};
+ pm8916_l17: l17 {};
+ pm8916_l18: l18 {};
+ };
+};
diff --git a/arch/arm/dts/msm8916.dtsi b/arch/arm/dts/msm8916.dtsi
new file mode 100644
index 000000000000..834e0b66b7f2
--- /dev/null
+++ b/arch/arm/dts/msm8916.dtsi
@@ -0,0 +1,2194 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8916.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ chosen { };
+
+ memory at 80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tz-apps at 86000000 {
+ reg = <0x0 0x86000000 0x0 0x300000>;
+ no-map;
+ };
+
+ smem at 86300000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0x86300000 0x0 0x100000>;
+ no-map;
+
+ hwlocks = <&tcsr_mutex 3>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ };
+
+ hypervisor at 86400000 {
+ reg = <0x0 0x86400000 0x0 0x100000>;
+ no-map;
+ };
+
+ tz at 86500000 {
+ reg = <0x0 0x86500000 0x0 0x180000>;
+ no-map;
+ };
+
+ reserved at 86680000 {
+ reg = <0x0 0x86680000 0x0 0x80000>;
+ no-map;
+ };
+
+ rmtfs at 86700000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0x86700000 0x0 0xe0000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+
+ rfsa at 867e0000 {
+ reg = <0x0 0x867e0000 0x0 0x20000>;
+ no-map;
+ };
+
+ mpss_mem: mpss at 86800000 {
+ reg = <0x0 0x86800000 0x0 0x2b00000>;
+ no-map;
+ };
+
+ wcnss_mem: wcnss at 89300000 {
+ reg = <0x0 0x89300000 0x0 0x600000>;
+ no-map;
+ };
+
+ venus_mem: venus at 89900000 {
+ reg = <0x0 0x89900000 0x0 0x600000>;
+ no-map;
+ };
+
+ mba_mem: mba at 8ea00000 {
+ no-map;
+ reg = <0 0x8ea00000 0 0x100000>;
+ };
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
+ qcom,acc = <&cpu0_acc>;
+ qcom,saw = <&cpu0_saw>;
+ };
+
+ CPU1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
+ qcom,acc = <&cpu1_acc>;
+ qcom,saw = <&cpu1_saw>;
+ };
+
+ CPU2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
+ qcom,acc = <&cpu2_acc>;
+ qcom,saw = <&cpu2_saw>;
+ };
+
+ CPU3: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
+ qcom,acc = <&cpu3_acc>;
+ qcom,saw = <&cpu3_saw>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "standalone-power-collapse";
+ arm,psci-suspend-param = <0x40000002>;
+ entry-latency-us = <130>;
+ exit-latency-us = <150>;
+ min-residency-us = <2000>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+
+ CLUSTER_RET: cluster-retention {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x41000012>;
+ entry-latency-us = <500>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
+
+ CLUSTER_PWRDN: cluster-gdhs {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x41000032>;
+ entry-latency-us = <2000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <6000>;
+ };
+ };
+ };
+
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ opp-998400000 {
+ opp-hz = /bits/ 64 <998400000>;
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-msm8916", "qcom,scm";
+ clocks = <&gcc GCC_CRYPTO_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ #reset-cells = <1>;
+
+ qcom,dload-mode = <&tcsr 0x6100>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ CPU_PD0: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: power-domain-cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: power-domain-cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: power-domain-cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ CLUSTER_PD: power-domain-cluster {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+ };
+ };
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8916";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8916-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <1>;
+ };
+ rpmpd_opp_svs_krait: opp2 {
+ opp-level = <2>;
+ };
+ rpmpd_opp_svs_soc: opp3 {
+ opp-level = <3>;
+ };
+ rpmpd_opp_nom: opp4 {
+ opp-level = <4>;
+ };
+ rpmpd_opp_turbo: opp5 {
+ opp-level = <5>;
+ };
+ rpmpd_opp_super_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ smp2p-hexagon {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ hexagon_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ hexagon_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-wcnss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <451>, <431>;
+
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 18>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smsm {
+ compatible = "qcom,smsm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,ipc-1 = <&apcs 8 13>;
+ qcom,ipc-3 = <&apcs 8 19>;
+
+ apps_smsm: apps at 0 {
+ reg = <0>;
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ hexagon_smsm: hexagon at 1 {
+ reg = <1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wcnss_smsm: wcnss at 6 {
+ reg = <6>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ soc: soc at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ rng at 22000 {
+ compatible = "qcom,prng";
+ reg = <0x00022000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ restart at 4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0x004ab000 0x4>;
+ };
+
+ qfprom: qfprom at 5c000 {
+ compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
+ reg = <0x0005c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tsens_base1: base1 at d0 {
+ reg = <0xd0 0x1>;
+ bits = <0 7>;
+ };
+
+ tsens_s0_p1: s0-p1 at d0 {
+ reg = <0xd0 0x2>;
+ bits = <7 5>;
+ };
+
+ tsens_s0_p2: s0-p2 at d1 {
+ reg = <0xd1 0x2>;
+ bits = <4 5>;
+ };
+
+ tsens_s1_p1: s1-p1 at d2 {
+ reg = <0xd2 0x1>;
+ bits = <1 5>;
+ };
+ tsens_s1_p2: s1-p2 at d2 {
+ reg = <0xd2 0x2>;
+ bits = <6 5>;
+ };
+ tsens_s2_p1: s2-p1 at d3 {
+ reg = <0xd3 0x1>;
+ bits = <3 5>;
+ };
+
+ tsens_s2_p2: s2-p2 at d4 {
+ reg = <0xd4 0x1>;
+ bits = <0 5>;
+ };
+
+ // no tsens with hw_id 3
+
+ tsens_s4_p1: s4-p1 at d4 {
+ reg = <0xd4 0x2>;
+ bits = <5 5>;
+ };
+
+ tsens_s4_p2: s4-p2 at d5 {
+ reg = <0xd5 0x1>;
+ bits = <2 5>;
+ };
+
+ tsens_s5_p1: s5-p1 at d5 {
+ reg = <0xd5 0x2>;
+ bits = <7 5>;
+ };
+
+ tsens_s5_p2: s5-p2 at d6 {
+ reg = <0xd6 0x2>;
+ bits = <4 5>;
+ };
+
+ tsens_base2: base2 at d7 {
+ reg = <0xd7 0x1>;
+ bits = <1 7>;
+ };
+
+ tsens_mode: mode at ef {
+ reg = <0xef 0x1>;
+ bits = <5 3>;
+ };
+ };
+
+ rpm_msg_ram: sram at 60000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x00060000 0x8000>;
+ };
+
+ sram at 290000 {
+ compatible = "qcom,msm8916-rpm-stats";
+ reg = <0x00290000 0x10000>;
+ };
+
+ bimc: interconnect at 400000 {
+ compatible = "qcom,msm8916-bimc";
+ reg = <0x00400000 0x62000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ tsens: thermal-sensor at 4a9000 {
+ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+
+ // no hw_id 3
+ nvmem-cells = <&tsens_mode>,
+ <&tsens_base1>, <&tsens_base2>,
+ <&tsens_s0_p1>, <&tsens_s0_p2>,
+ <&tsens_s1_p1>, <&tsens_s1_p2>,
+ <&tsens_s2_p1>, <&tsens_s2_p2>,
+ <&tsens_s4_p1>, <&tsens_s4_p2>,
+ <&tsens_s5_p1>, <&tsens_s5_p2>;
+ nvmem-cell-names = "mode",
+ "base1", "base2",
+ "s0_p1", "s0_p2",
+ "s1_p1", "s1_p2",
+ "s2_p1", "s2_p2",
+ "s4_p1", "s4_p2",
+ "s5_p1", "s5_p2";
+ #qcom,sensors = <5>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+ #thermal-sensor-cells = <1>;
+ };
+
+ pcnoc: interconnect at 500000 {
+ compatible = "qcom,msm8916-pcnoc";
+ reg = <0x00500000 0x11000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+ };
+
+ snoc: interconnect at 580000 {
+ compatible = "qcom,msm8916-snoc";
+ reg = <0x00580000 0x14000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
+ stm: stm at 802000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0x00802000 0x1000>,
+ <0x09280000 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint = <&funnel0_in7>;
+ };
+ };
+ };
+ };
+
+ /* System CTIs */
+ /* CTI 0 - TMC connections */
+ cti0: cti at 810000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x00810000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ status = "disabled";
+ };
+
+ /* CTI 1 - TPIU connections */
+ cti1: cti at 811000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x00811000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ status = "disabled";
+ };
+
+ /* CTIs 2-11 - no information - not instantiated */
+
+ tpiu: tpiu at 820000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x00820000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+ };
+
+ funnel0: funnel at 821000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x00821000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 0 - connected to Resource and Power Manger CPU ETM
+ * 1 - not-connected
+ * 2 - connected to Modem CPU ETM
+ * 3 - not-connected
+ * 5 - not-connected
+ * 6 - connected trought funnel to Wireless CPU ETM
+ * 7 - connected to STM component
+ */
+
+ port at 4 {
+ reg = <4>;
+ funnel0_in4: endpoint {
+ remote-endpoint = <&funnel1_out>;
+ };
+ };
+
+ port at 7 {
+ reg = <7>;
+ funnel0_in7: endpoint {
+ remote-endpoint = <&stm_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ funnel0_out: endpoint {
+ remote-endpoint = <&etf_in>;
+ };
+ };
+ };
+ };
+
+ replicator: replicator at 824000 {
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+ reg = <0x00824000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etr_in>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ replicator_in: endpoint {
+ remote-endpoint = <&etf_out>;
+ };
+ };
+ };
+ };
+
+ etf: etf at 825000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x00825000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint = <&funnel0_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ etf_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etr: etr at 826000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x00826000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+ };
+
+ funnel1: funnel at 841000 { /* APSS funnel only 4 inputs are used */
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x00841000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ funnel1_in0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ funnel1_in1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port at 2 {
+ reg = <2>;
+ funnel1_in2: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port at 3 {
+ reg = <3>;
+ funnel1_in3: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ funnel1_out: endpoint {
+ remote-endpoint = <&funnel0_in4>;
+ };
+ };
+ };
+ };
+
+ debug0: debug at 850000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00850000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU0>;
+ status = "disabled";
+ };
+
+ debug1: debug at 852000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00852000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU1>;
+ status = "disabled";
+ };
+
+ debug2: debug at 854000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00854000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU2>;
+ status = "disabled";
+ };
+
+ debug3: debug at 856000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00856000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU3>;
+ status = "disabled";
+ };
+
+ /* Core CTIs; CTIs 12-15 */
+ /* CTI - CPU-0 */
+ cti12: cti at 858000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x00858000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+ arm,cs-dev-assoc = <&etm0>;
+
+ status = "disabled";
+ };
+
+ /* CTI - CPU-1 */
+ cti13: cti at 859000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x00859000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+ arm,cs-dev-assoc = <&etm1>;
+
+ status = "disabled";
+ };
+
+ /* CTI - CPU-2 */
+ cti14: cti at 85a000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x0085a000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+ arm,cs-dev-assoc = <&etm2>;
+
+ status = "disabled";
+ };
+
+ /* CTI - CPU-3 */
+ cti15: cti at 85b000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x0085b000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+ arm,cs-dev-assoc = <&etm3>;
+
+ status = "disabled";
+ };
+
+ etm0: etm at 85c000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU0>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
+ };
+ };
+ };
+
+ etm1: etm at 85d000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU1>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
+ };
+ };
+ };
+
+ etm2: etm at 85e000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU2>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
+ };
+ };
+ };
+
+ etm3: etm at 85f000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU3>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
+ };
+ };
+ };
+
+ msmgpio: pinctrl at 1000000 {
+ compatible = "qcom,msm8916-pinctrl";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 122>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gcc: clock-controller at 1800000 {
+ compatible = "qcom,gcc-msm8916";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x01800000 0x80000>;
+ clocks = <&xo_board>,
+ <&sleep_clk>,
+ <&dsi_phy0 1>,
+ <&dsi_phy0 0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "xo",
+ "sleep_clk",
+ "dsi0pll",
+ "dsi0pllbyte",
+ "ext_mclk",
+ "ext_pri_i2s",
+ "ext_sec_i2s";
+ };
+
+ tcsr_mutex: hwlock at 1905000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01905000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: syscon at 1937000 {
+ compatible = "qcom,tcsr-msm8916", "syscon";
+ reg = <0x01937000 0x30000>;
+ };
+
+ mdss: display-subsystem at 1a00000 {
+ status = "disabled";
+ compatible = "qcom,mdss";
+ reg = <0x01a00000 0x1000>,
+ <0x01ac8000 0x3000>;
+ reg-names = "mdss_phys", "vbif_phys";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdp: display-controller at 1a01000 {
+ compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
+ reg = <0x01a01000 0x89000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ iommus = <&apps_iommu 4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi0: dsi at 1a98000 {
+ compatible = "qcom,msm8916-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
+ reg = <0x01a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+ <&gcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi_phy0 0>,
+ <&dsi_phy0 1>;
+
+ clocks = <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ clock-names = "mdp_core",
+ "iface",
+ "bus",
+ "byte",
+ "pixel",
+ "core";
+ phys = <&dsi_phy0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp5_intf1_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi_phy0: phy at 1a98300 {
+ compatible = "qcom,dsi-phy-28nm-lp";
+ reg = <0x01a98300 0xd4>,
+ <0x01a98500 0x280>,
+ <0x01a98780 0x30>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "ref";
+ };
+ };
+
+ camss: camss at 1b00000 {
+ compatible = "qcom,msm8916-camss";
+ reg = <0x01b0ac00 0x200>,
+ <0x01b00030 0x4>,
+ <0x01b0b000 0x200>,
+ <0x01b00038 0x4>,
+ <0x01b08000 0x100>,
+ <0x01b08400 0x100>,
+ <0x01b0a000 0x500>,
+ <0x01b00020 0x10>,
+ <0x01b10000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "ispif",
+ "vfe0";
+ power-domains = <&gcc VFE_GDSC>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
+ iommus = <&apps_iommu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci: cci at 1b0c000 {
+ compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01b0c000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>;
+ clock-names = "camss_top_ahb", "cci_ahb",
+ "cci", "camss_ahb";
+ assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_CLK>;
+ assigned-clock-rates = <80000000>, <19200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cci0_default>;
+ status = "disabled";
+
+ cci_i2c0: i2c-bus at 0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gpu at 1c00000 {
+ compatible = "qcom,adreno-306.0", "qcom,adreno";
+ reg = <0x01c00000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core",
+ "iface",
+ "mem",
+ "mem_iface",
+ "alt_mem_iface",
+ "gfx3d";
+ clocks =
+ <&gcc GCC_OXILI_GFX3D_CLK>,
+ <&gcc GCC_OXILI_AHB_CLK>,
+ <&gcc GCC_OXILI_GMEM_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_BIMC_GPU_CLK>,
+ <&gcc GFX3D_CLK_SRC>;
+ power-domains = <&gcc OXILI_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+ iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ };
+ };
+ };
+
+ venus: video-codec at 1d00000 {
+ compatible = "qcom,msm8916-venus";
+ reg = <0x01d00000 0xff000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&gcc VENUS_GDSC>;
+ clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+ <&gcc GCC_VENUS0_AHB_CLK>,
+ <&gcc GCC_VENUS0_AXI_CLK>;
+ clock-names = "core", "iface", "bus";
+ iommus = <&apps_iommu 5>;
+ memory-region = <&venus_mem>;
+ status = "okay";
+
+ video-decoder {
+ compatible = "venus-decoder";
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ };
+ };
+
+ apps_iommu: iommu at 1ef0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x01e20000 0x40000>;
+ reg = <0x01ef0000 0x3000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_APSS_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <17>;
+
+ /* VFE */
+ iommu-ctx at 3000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* MDP_0 */
+ iommu-ctx at 4000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x4000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* VENUS_NS */
+ iommu-ctx at 5000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x5000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpu_iommu: iommu at 1f08000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x01f08000 0x10000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_GFX_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <18>;
+
+ /* GFX3D_USER */
+ iommu-ctx at 1000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* GFX3D_PRIV */
+ iommu-ctx at 2000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ spmi_bus: spmi at 200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0200f000 0x001000>,
+ <0x02400000 0x400000>,
+ <0x02c00000 0x400000>,
+ <0x03800000 0x200000>,
+ <0x0200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ bam_dmux_dma: dma-controller at 4044000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x04044000 0x19000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+
+ num-channels = <6>;
+ qcom,num-ees = <1>;
+ qcom,powered-remotely;
+
+ status = "disabled";
+ };
+
+ mpss: remoteproc at 4080000 {
+ compatible = "qcom,msm8916-mss-pil";
+ reg = <0x04080000 0x100>,
+ <0x04020000 0x040>;
+
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ power-domains = <&rpmpd MSM8916_VDDCX>,
+ <&rpmpd MSM8916_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ qcom,smem-states = <&hexagon_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&scm 0>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+ status = "disabled";
+
+ mba {
+ memory-region = <&mba_mem>;
+ };
+
+ mpss {
+ memory-region = <&mpss_mem>;
+ };
+
+ bam_dmux: bam-dmux {
+ compatible = "qcom,bam-dmux";
+
+ interrupt-parent = <&hexagon_smsm>;
+ interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "pc", "pc-ack";
+
+ qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+ qcom,smem-state-names = "pc", "pc-ack";
+
+ dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+ dma-names = "tx", "rx";
+
+ status = "disabled";
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,smd-edge = <0>;
+ qcom,ipc = <&apcs 8 12>;
+ qcom,remote-pid = <1>;
+
+ label = "hexagon";
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,smd-channels = "fastrpcsmd-apps-dsp";
+ label = "adsp";
+ qcom,non-secure-domain;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cb at 1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ };
+ };
+ };
+ };
+
+ sound: sound at 7702000 {
+ status = "disabled";
+ compatible = "qcom,apq8016-sbc-sndcard";
+ reg = <0x07702000 0x4>, <0x07702004 0x4>;
+ reg-names = "mic-iomux", "spkr-iomux";
+ };
+
+ lpass: audio-controller at 7708000 {
+ status = "disabled";
+ compatible = "qcom,apq8016-lpass-cpu";
+
+ /*
+ * Note: Unlike the name would suggest, the SEC_I2S_CLK
+ * is actually only used by Tertiary MI2S while
+ * Primary/Secondary MI2S both use the PRI_I2S_CLK.
+ */
+ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+ <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+ <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
+
+ clock-names = "ahbix-clk",
+ "pcnoc-mport-clk",
+ "pcnoc-sway-clk",
+ "mi2s-bit-clk0",
+ "mi2s-bit-clk1",
+ "mi2s-bit-clk2",
+ "mi2s-bit-clk3";
+ #sound-dai-cells = <1>;
+
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpass-irq-lpaif";
+ reg = <0x07708000 0x10000>;
+ reg-names = "lpass-lpaif";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ lpass_codec: audio-codec at 771c000 {
+ compatible = "qcom,msm8916-wcd-digital-codec";
+ reg = <0x0771c000 0x400>;
+ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+ <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "ahbix-clk", "mclk";
+ #sound-dai-cells = <1>;
+ };
+
+ sdhc_1: mmc at 7824000 {
+ compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+ reg-names = "hc", "core";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+ mmc-ddr-1_8v;
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: mmc at 7864000 {
+ compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+ reg-names = "hc", "core";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ blsp_dma: dma-controller at 7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x23000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp1_uart1: serial at 78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart1_default>;
+ pinctrl-1 = <&blsp1_uart1_sleep>;
+ status = "disabled";
+ };
+
+ blsp1_uart2: serial at 78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
+ status = "disabled";
+ };
+
+ blsp_i2c1: i2c at 78b5000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b5000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_default>;
+ pinctrl-1 = <&i2c1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi1: spi at 78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b5000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi1_default>;
+ pinctrl-1 = <&spi1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c2: i2c at 78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b6000 0x500>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_default>;
+ pinctrl-1 = <&i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi2: spi at 78b6000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b6000 0x500>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi2_default>;
+ pinctrl-1 = <&spi2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c3: i2c at 78b7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b7000 0x500>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_default>;
+ pinctrl-1 = <&i2c3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi3: spi at 78b7000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b7000 0x500>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi3_default>;
+ pinctrl-1 = <&spi3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c4: i2c at 78b8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b8000 0x500>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c4_default>;
+ pinctrl-1 = <&i2c4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi4: spi at 78b8000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b8000 0x500>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi4_default>;
+ pinctrl-1 = <&spi4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c5: i2c at 78b9000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b9000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c5_default>;
+ pinctrl-1 = <&i2c5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi5: spi at 78b9000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b9000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi5_default>;
+ pinctrl-1 = <&spi5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c6: i2c at 78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078ba000 0x500>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_default>;
+ pinctrl-1 = <&i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi6: spi at 78ba000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078ba000 0x500>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi6_default>;
+ pinctrl-1 = <&spi6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usb: usb at 78d9000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x078d9000 0x200>,
+ <0x078d9200 0x200>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+ assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ assigned-clock-rates = <80000000>;
+ resets = <&gcc GCC_USB_HS_BCR>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ ahb-burst-config = <0>;
+ phy-names = "usb-phy";
+ phys = <&usb_hs_phy>;
+ status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8916",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+ reset-names = "phy", "por";
+ qcom,init-seq = /bits/ 8 <0x0 0x44>,
+ <0x1 0x6b>,
+ <0x2 0x24>,
+ <0x3 0x13>;
+ };
+ };
+ };
+
+ wcnss: remoteproc at a21b000 {
+ compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+ reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ memory-region = <&wcnss_mem>;
+
+ interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ power-domains = <&rpmpd MSM8916_VDDCX>,
+ <&rpmpd MSM8916_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
+
+ status = "disabled";
+
+ wcnss_iris: iris {
+ /* Separate chip, compatible is board-specific */
+ clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+ clock-names = "xo";
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+ qcom,remote-pid = <4>;
+
+ label = "pronto";
+
+ wcnss_ctrl: wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&wcnss>;
+
+ wcnss_bt: bluetooth {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wcnss_wifi: wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
+ intc: interrupt-controller at b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
+ <0x0b001000 0x1000>, <0x0b004000 0x2000>;
+ interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apcs: mailbox at b011000 {
+ compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
+ reg = <0x0b011000 0x1000>;
+ #mbox-cells = <1>;
+ clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+ clock-names = "pll", "aux";
+ #clock-cells = <0>;
+ };
+
+ a53pll: clock at b016000 {
+ compatible = "qcom,msm8916-a53pll";
+ reg = <0x0b016000 0x40>;
+ #clock-cells = <0>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ timer at b020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b020000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame at b021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b021000 0x1000>,
+ <0x0b022000 0x1000>;
+ };
+
+ frame at b023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame at b024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame at b025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame at b026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame at b027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame at b028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b028000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ cpu0_acc: power-manager at b088000 {
+ compatible = "qcom,msm8916-acc";
+ reg = <0x0b088000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu0_saw: power-manager at b089000 {
+ compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+ reg = <0x0b089000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu1_acc: power-manager at b098000 {
+ compatible = "qcom,msm8916-acc";
+ reg = <0x0b098000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu1_saw: power-manager at b099000 {
+ compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+ reg = <0x0b099000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu2_acc: power-manager at b0a8000 {
+ compatible = "qcom,msm8916-acc";
+ reg = <0x0b0a8000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu2_saw: power-manager at b0a9000 {
+ compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+ reg = <0x0b0a9000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu3_acc: power-manager at b0b8000 {
+ compatible = "qcom,msm8916-acc";
+ reg = <0x0b0b8000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu3_saw: power-manager at b0b9000 {
+ compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+ reg = <0x0b0b9000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+ };
+
+ thermal-zones {
+ cpu0-1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu0_1_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_1_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_1_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu2_3_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_3_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_3_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ gpu_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ gpu_crit: gpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cam_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ modem_alert0: trip-point0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
+
+#include "msm8916-pins.dtsi"
diff --git a/arch/arm/dts/pm8916.dtsi b/arch/arm/dts/pm8916.dtsi
new file mode 100644
index 000000000000..f4fb1a92ab55
--- /dev/null
+++ b/arch/arm/dts/pm8916.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+ pm8916_0: pmic at 0 {
+ compatible = "qcom,pm8916", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pon at 800 {
+ compatible = "qcom,pm8916-pon";
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ pm8916_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ status = "disabled";
+ };
+
+ watchdog {
+ compatible = "qcom,pm8916-wdt";
+ interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+ timeout-sec = <60>;
+ };
+ };
+
+ pm8916_usbin: usb-detect at 1300 {
+ compatible = "qcom,pm8941-misc";
+ reg = <0x1300>;
+ interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "usb_vbus";
+ status = "disabled";
+ };
+
+ pm8916_temp: temp-alarm at 2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8916_vadc: adc at 3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ adc-chan at 0 {
+ reg = <VADC_USBIN>;
+ qcom,pre-scaling = <1 10>;
+ };
+ adc-chan at 7 {
+ reg = <VADC_VSYS>;
+ qcom,pre-scaling = <1 3>;
+ };
+ adc-chan at 8 {
+ reg = <VADC_DIE_TEMP>;
+ };
+ adc-chan at 9 {
+ reg = <VADC_REF_625MV>;
+ };
+ adc-chan at a {
+ reg = <VADC_REF_1250MV>;
+ };
+ adc-chan at e {
+ reg = <VADC_GND_REF>;
+ };
+ adc-chan at f {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+
+ rtc at 6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pm8916_mpps: mpps at a000 {
+ compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp";
+ reg = <0xa000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8916_mpps 0 0 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pm8916_gpios: gpio at c000 {
+ compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ gpio-ranges = <&pm8916_gpios 0 0 4>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pm8916_1: pmic at 1 {
+ compatible = "qcom,pm8916", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8916_pwm: pwm {
+ compatible = "qcom,pm8916-pwm";
+
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+
+ pm8916_vib: vibrator at c000 {
+ compatible = "qcom,pm8916-vib";
+ reg = <0xc000>;
+ status = "disabled";
+ };
+
+ wcd_codec: audio-codec at f000 {
+ compatible = "qcom,pm8916-wcd-analog-codec";
+ reg = <0xf000>;
+ reg-names = "pmic-codec-core";
+ clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "mclk";
+ interrupt-parent = <&spmi_bus>;
+ interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+ interrupt-names = "cdc_spk_cnp_int",
+ "cdc_spk_clip_int",
+ "cdc_spk_ocp_int",
+ "mbhc_ins_rem_det1",
+ "mbhc_but_rel_det",
+ "mbhc_but_press_det",
+ "mbhc_ins_rem_det",
+ "mbhc_switch_int",
+ "cdc_ear_ocp_int",
+ "cdc_hphr_ocp_int",
+ "cdc_hphl_ocp_det",
+ "cdc_ear_cnp_int",
+ "cdc_hphr_cnp_int",
+ "cdc_hphl_cnp_int";
+ vdd-cdc-io-supply = <&pm8916_l5>;
+ vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+ vdd-micbias-supply = <&pm8916_l13>;
+ #sound-dai-cells = <1>;
+ };
+ };
+};
diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h
new file mode 100644
index 000000000000..61e7bdf8ea6e
--- /dev/null
+++ b/include/dt-bindings/arm/coresight-cti-dt.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for the defined trigger signal
+ * types on CoreSight CTI.
+ */
+
+#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
+#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
+
+#define GEN_IO 0
+#define GEN_INTREQ 1
+#define GEN_INTACK 2
+#define GEN_HALTREQ 3
+#define GEN_RESTARTREQ 4
+#define PE_EDBGREQ 5
+#define PE_DBGRESTART 6
+#define PE_CTIIRQ 7
+#define PE_PMUIRQ 8
+#define PE_DBGTRIGGER 9
+#define ETM_EXTOUT 10
+#define ETM_EXTIN 11
+#define SNK_FULL 12
+#define SNK_ACQCOMP 13
+#define SNK_FLUSHCOMP 14
+#define SNK_FLUSHIN 15
+#define SNK_TRIGIN 16
+#define STM_ASYNCOUT 17
+#define STM_TOUT_SPTE 18
+#define STM_TOUT_SW 19
+#define STM_TOUT_HETE 20
+#define STM_HWEVENT 21
+#define ELA_TSTART 22
+#define ELA_TSTOP 23
+#define ELA_DBGREQ 24
+#define CTI_TRIG_MAX 25
+
+#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */
diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
new file mode 100644
index 000000000000..46309c9953b2
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,rpmcc.h
@@ -0,0 +1,174 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2015 Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
+#define _DT_BINDINGS_CLK_MSM_RPMCC_H
+
+/* RPM clocks */
+#define RPM_PXO_CLK 0
+#define RPM_PXO_A_CLK 1
+#define RPM_CXO_CLK 2
+#define RPM_CXO_A_CLK 3
+#define RPM_APPS_FABRIC_CLK 4
+#define RPM_APPS_FABRIC_A_CLK 5
+#define RPM_CFPB_CLK 6
+#define RPM_CFPB_A_CLK 7
+#define RPM_QDSS_CLK 8
+#define RPM_QDSS_A_CLK 9
+#define RPM_DAYTONA_FABRIC_CLK 10
+#define RPM_DAYTONA_FABRIC_A_CLK 11
+#define RPM_EBI1_CLK 12
+#define RPM_EBI1_A_CLK 13
+#define RPM_MM_FABRIC_CLK 14
+#define RPM_MM_FABRIC_A_CLK 15
+#define RPM_MMFPB_CLK 16
+#define RPM_MMFPB_A_CLK 17
+#define RPM_SYS_FABRIC_CLK 18
+#define RPM_SYS_FABRIC_A_CLK 19
+#define RPM_SFPB_CLK 20
+#define RPM_SFPB_A_CLK 21
+#define RPM_SMI_CLK 22
+#define RPM_SMI_A_CLK 23
+#define RPM_PLL4_CLK 24
+#define RPM_XO_D0 25
+#define RPM_XO_D1 26
+#define RPM_XO_A0 27
+#define RPM_XO_A1 28
+#define RPM_XO_A2 29
+#define RPM_NSS_FABRIC_0_CLK 30
+#define RPM_NSS_FABRIC_0_A_CLK 31
+#define RPM_NSS_FABRIC_1_CLK 32
+#define RPM_NSS_FABRIC_1_A_CLK 33
+
+/* SMD RPM clocks */
+#define RPM_SMD_XO_CLK_SRC 0
+#define RPM_SMD_XO_A_CLK_SRC 1
+#define RPM_SMD_PCNOC_CLK 2
+#define RPM_SMD_PCNOC_A_CLK 3
+#define RPM_SMD_SNOC_CLK 4
+#define RPM_SMD_SNOC_A_CLK 5
+#define RPM_SMD_BIMC_CLK 6
+#define RPM_SMD_BIMC_A_CLK 7
+#define RPM_SMD_QDSS_CLK 8
+#define RPM_SMD_QDSS_A_CLK 9
+#define RPM_SMD_BB_CLK1 10
+#define RPM_SMD_BB_CLK1_A 11
+#define RPM_SMD_BB_CLK2 12
+#define RPM_SMD_BB_CLK2_A 13
+#define RPM_SMD_RF_CLK1 14
+#define RPM_SMD_RF_CLK1_A 15
+#define RPM_SMD_RF_CLK2 16
+#define RPM_SMD_RF_CLK2_A 17
+#define RPM_SMD_BB_CLK1_PIN 18
+#define RPM_SMD_BB_CLK1_A_PIN 19
+#define RPM_SMD_BB_CLK2_PIN 20
+#define RPM_SMD_BB_CLK2_A_PIN 21
+#define RPM_SMD_RF_CLK1_PIN 22
+#define RPM_SMD_RF_CLK1_A_PIN 23
+#define RPM_SMD_RF_CLK2_PIN 24
+#define RPM_SMD_RF_CLK2_A_PIN 25
+#define RPM_SMD_PNOC_CLK 26
+#define RPM_SMD_PNOC_A_CLK 27
+#define RPM_SMD_CNOC_CLK 28
+#define RPM_SMD_CNOC_A_CLK 29
+#define RPM_SMD_MMSSNOC_AHB_CLK 30
+#define RPM_SMD_MMSSNOC_AHB_A_CLK 31
+#define RPM_SMD_GFX3D_CLK_SRC 32
+#define RPM_SMD_GFX3D_A_CLK_SRC 33
+#define RPM_SMD_OCMEMGX_CLK 34
+#define RPM_SMD_OCMEMGX_A_CLK 35
+#define RPM_SMD_CXO_D0 36
+#define RPM_SMD_CXO_D0_A 37
+#define RPM_SMD_CXO_D1 38
+#define RPM_SMD_CXO_D1_A 39
+#define RPM_SMD_CXO_A0 40
+#define RPM_SMD_CXO_A0_A 41
+#define RPM_SMD_CXO_A1 42
+#define RPM_SMD_CXO_A1_A 43
+#define RPM_SMD_CXO_A2 44
+#define RPM_SMD_CXO_A2_A 45
+#define RPM_SMD_DIV_CLK1 46
+#define RPM_SMD_DIV_A_CLK1 47
+#define RPM_SMD_DIV_CLK2 48
+#define RPM_SMD_DIV_A_CLK2 49
+#define RPM_SMD_DIFF_CLK 50
+#define RPM_SMD_DIFF_A_CLK 51
+#define RPM_SMD_CXO_D0_PIN 52
+#define RPM_SMD_CXO_D0_A_PIN 53
+#define RPM_SMD_CXO_D1_PIN 54
+#define RPM_SMD_CXO_D1_A_PIN 55
+#define RPM_SMD_CXO_A0_PIN 56
+#define RPM_SMD_CXO_A0_A_PIN 57
+#define RPM_SMD_CXO_A1_PIN 58
+#define RPM_SMD_CXO_A1_A_PIN 59
+#define RPM_SMD_CXO_A2_PIN 60
+#define RPM_SMD_CXO_A2_A_PIN 61
+#define RPM_SMD_AGGR1_NOC_CLK 62
+#define RPM_SMD_AGGR1_NOC_A_CLK 63
+#define RPM_SMD_AGGR2_NOC_CLK 64
+#define RPM_SMD_AGGR2_NOC_A_CLK 65
+#define RPM_SMD_MMAXI_CLK 66
+#define RPM_SMD_MMAXI_A_CLK 67
+#define RPM_SMD_IPA_CLK 68
+#define RPM_SMD_IPA_A_CLK 69
+#define RPM_SMD_CE1_CLK 70
+#define RPM_SMD_CE1_A_CLK 71
+#define RPM_SMD_DIV_CLK3 72
+#define RPM_SMD_DIV_A_CLK3 73
+#define RPM_SMD_LN_BB_CLK 74
+#define RPM_SMD_LN_BB_A_CLK 75
+#define RPM_SMD_BIMC_GPU_CLK 76
+#define RPM_SMD_BIMC_GPU_A_CLK 77
+#define RPM_SMD_QPIC_CLK 78
+#define RPM_SMD_QPIC_CLK_A 79
+#define RPM_SMD_LN_BB_CLK1 80
+#define RPM_SMD_LN_BB_CLK1_A 81
+#define RPM_SMD_LN_BB_CLK2 82
+#define RPM_SMD_LN_BB_CLK2_A 83
+#define RPM_SMD_LN_BB_CLK3_PIN 84
+#define RPM_SMD_LN_BB_CLK3_A_PIN 85
+#define RPM_SMD_RF_CLK3 86
+#define RPM_SMD_RF_CLK3_A 87
+#define RPM_SMD_RF_CLK3_PIN 88
+#define RPM_SMD_RF_CLK3_A_PIN 89
+#define RPM_SMD_MMSSNOC_AXI_CLK 90
+#define RPM_SMD_MMSSNOC_AXI_CLK_A 91
+#define RPM_SMD_CNOC_PERIPH_CLK 92
+#define RPM_SMD_CNOC_PERIPH_A_CLK 93
+#define RPM_SMD_LN_BB_CLK3 94
+#define RPM_SMD_LN_BB_CLK3_A 95
+#define RPM_SMD_LN_BB_CLK1_PIN 96
+#define RPM_SMD_LN_BB_CLK1_A_PIN 97
+#define RPM_SMD_LN_BB_CLK2_PIN 98
+#define RPM_SMD_LN_BB_CLK2_A_PIN 99
+#define RPM_SMD_SYSMMNOC_CLK 100
+#define RPM_SMD_SYSMMNOC_A_CLK 101
+#define RPM_SMD_CE2_CLK 102
+#define RPM_SMD_CE2_A_CLK 103
+#define RPM_SMD_CE3_CLK 104
+#define RPM_SMD_CE3_A_CLK 105
+#define RPM_SMD_QUP_CLK 106
+#define RPM_SMD_QUP_A_CLK 107
+#define RPM_SMD_MMRT_CLK 108
+#define RPM_SMD_MMRT_A_CLK 109
+#define RPM_SMD_MMNRT_CLK 110
+#define RPM_SMD_MMNRT_A_CLK 111
+#define RPM_SMD_SNOC_PERIPH_CLK 112
+#define RPM_SMD_SNOC_PERIPH_A_CLK 113
+#define RPM_SMD_SNOC_LPASS_CLK 114
+#define RPM_SMD_SNOC_LPASS_A_CLK 115
+#define RPM_SMD_HWKM_CLK 116
+#define RPM_SMD_HWKM_A_CLK 117
+#define RPM_SMD_PKA_CLK 118
+#define RPM_SMD_PKA_A_CLK 119
+#define RPM_SMD_CPUSS_GNOC_CLK 120
+#define RPM_SMD_CPUSS_GNOC_A_CLK 121
+#define RPM_SMD_MSS_CFG_AHB_CLK 122
+#define RPM_SMD_MSS_CFG_AHB_A_CLK 123
+#define RPM_SMD_BIMC_FREQ_LOG 124
+#define RPM_SMD_LN_BB_CLK_PIN 125
+#define RPM_SMD_LN_BB_A_CLK_PIN 126
+
+#endif
diff --git a/include/dt-bindings/interconnect/qcom,msm8916.h b/include/dt-bindings/interconnect/qcom,msm8916.h
new file mode 100644
index 000000000000..359a75feb198
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,msm8916.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm interconnect IDs
+ *
+ * Copyright (c) 2019, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov at linaro.org>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
+
+#define BIMC_SNOC_SLV 0
+#define MASTER_JPEG 1
+#define MASTER_MDP_PORT0 2
+#define MASTER_QDSS_BAM 3
+#define MASTER_QDSS_ETR 4
+#define MASTER_SNOC_CFG 5
+#define MASTER_VFE 6
+#define MASTER_VIDEO_P0 7
+#define SNOC_MM_INT_0 8
+#define SNOC_MM_INT_1 9
+#define SNOC_MM_INT_2 10
+#define SNOC_MM_INT_BIMC 11
+#define PCNOC_SNOC_SLV 12
+#define SLAVE_APSS 13
+#define SLAVE_CATS_128 14
+#define SLAVE_OCMEM_64 15
+#define SLAVE_IMEM 16
+#define SLAVE_QDSS_STM 17
+#define SLAVE_SRVC_SNOC 18
+#define SNOC_BIMC_0_MAS 19
+#define SNOC_BIMC_1_MAS 20
+#define SNOC_INT_0 21
+#define SNOC_INT_1 22
+#define SNOC_INT_BIMC 23
+#define SNOC_PCNOC_MAS 24
+#define SNOC_QDSS_INT 25
+
+#define BIMC_SNOC_MAS 0
+#define MASTER_AMPSS_M0 1
+#define MASTER_GRAPHICS_3D 2
+#define MASTER_TCU0 3
+#define MASTER_TCU1 4
+#define SLAVE_AMPSS_L2 5
+#define SLAVE_EBI_CH0 6
+#define SNOC_BIMC_0_SLV 7
+#define SNOC_BIMC_1_SLV 8
+
+#define MASTER_BLSP_1 0
+#define MASTER_DEHR 1
+#define MASTER_LPASS 2
+#define MASTER_CRYPTO_CORE0 3
+#define MASTER_SDCC_1 4
+#define MASTER_SDCC_2 5
+#define MASTER_SPDM 6
+#define MASTER_USB_HS 7
+#define PCNOC_INT_0 8
+#define PCNOC_INT_1 9
+#define PCNOC_MAS_0 10
+#define PCNOC_MAS_1 11
+#define PCNOC_SLV_0 12
+#define PCNOC_SLV_1 13
+#define PCNOC_SLV_2 14
+#define PCNOC_SLV_3 15
+#define PCNOC_SLV_4 16
+#define PCNOC_SLV_8 17
+#define PCNOC_SLV_9 18
+#define PCNOC_SNOC_MAS 19
+#define SLAVE_BIMC_CFG 20
+#define SLAVE_BLSP_1 21
+#define SLAVE_BOOT_ROM 22
+#define SLAVE_CAMERA_CFG 23
+#define SLAVE_CLK_CTL 24
+#define SLAVE_CRYPTO_0_CFG 25
+#define SLAVE_DEHR_CFG 26
+#define SLAVE_DISPLAY_CFG 27
+#define SLAVE_GRAPHICS_3D_CFG 28
+#define SLAVE_IMEM_CFG 29
+#define SLAVE_LPASS 30
+#define SLAVE_MPM 31
+#define SLAVE_MSG_RAM 32
+#define SLAVE_MSS 33
+#define SLAVE_PDM 34
+#define SLAVE_PMIC_ARB 35
+#define SLAVE_PCNOC_CFG 36
+#define SLAVE_PRNG 37
+#define SLAVE_QDSS_CFG 38
+#define SLAVE_RBCPR_CFG 39
+#define SLAVE_SDCC_1 40
+#define SLAVE_SDCC_2 41
+#define SLAVE_SECURITY 42
+#define SLAVE_SNOC_CFG 43
+#define SLAVE_SPDM 44
+#define SLAVE_TCSR 45
+#define SLAVE_TLMM 46
+#define SLAVE_USB_HS 47
+#define SLAVE_VENUS_CFG 48
+#define SNOC_PCNOC_SLV 49
+
+#endif
diff --git a/include/dt-bindings/reset/qcom,gcc-msm8916.h b/include/dt-bindings/reset/qcom,gcc-msm8916.h
new file mode 100644
index 000000000000..1f9be10872df
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,gcc-msm8916.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2015 Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_RESET_MSM_GCC_8916_H
+#define _DT_BINDINGS_RESET_MSM_GCC_8916_H
+
+#define GCC_BLSP1_BCR 0
+#define GCC_BLSP1_QUP1_BCR 1
+#define GCC_BLSP1_UART1_BCR 2
+#define GCC_BLSP1_QUP2_BCR 3
+#define GCC_BLSP1_UART2_BCR 4
+#define GCC_BLSP1_QUP3_BCR 5
+#define GCC_BLSP1_QUP4_BCR 6
+#define GCC_BLSP1_QUP5_BCR 7
+#define GCC_BLSP1_QUP6_BCR 8
+#define GCC_IMEM_BCR 9
+#define GCC_SMMU_BCR 10
+#define GCC_APSS_TCU_BCR 11
+#define GCC_SMMU_XPU_BCR 12
+#define GCC_PCNOC_TBU_BCR 13
+#define GCC_PRNG_BCR 14
+#define GCC_BOOT_ROM_BCR 15
+#define GCC_CRYPTO_BCR 16
+#define GCC_SEC_CTRL_BCR 17
+#define GCC_AUDIO_CORE_BCR 18
+#define GCC_ULT_AUDIO_BCR 19
+#define GCC_DEHR_BCR 20
+#define GCC_SYSTEM_NOC_BCR 21
+#define GCC_PCNOC_BCR 22
+#define GCC_TCSR_BCR 23
+#define GCC_QDSS_BCR 24
+#define GCC_DCD_BCR 25
+#define GCC_MSG_RAM_BCR 26
+#define GCC_MPM_BCR 27
+#define GCC_SPMI_BCR 28
+#define GCC_SPDM_BCR 29
+#define GCC_MM_SPDM_BCR 30
+#define GCC_BIMC_BCR 31
+#define GCC_RBCPR_BCR 32
+#define GCC_TLMM_BCR 33
+#define GCC_USB_HS_BCR 34
+#define GCC_USB2A_PHY_BCR 35
+#define GCC_SDCC1_BCR 36
+#define GCC_SDCC2_BCR 37
+#define GCC_PDM_BCR 38
+#define GCC_SNOC_BUS_TIMEOUT0_BCR 39
+#define GCC_PCNOC_BUS_TIMEOUT0_BCR 40
+#define GCC_PCNOC_BUS_TIMEOUT1_BCR 41
+#define GCC_PCNOC_BUS_TIMEOUT2_BCR 42
+#define GCC_PCNOC_BUS_TIMEOUT3_BCR 43
+#define GCC_PCNOC_BUS_TIMEOUT4_BCR 44
+#define GCC_PCNOC_BUS_TIMEOUT5_BCR 45
+#define GCC_PCNOC_BUS_TIMEOUT6_BCR 46
+#define GCC_PCNOC_BUS_TIMEOUT7_BCR 47
+#define GCC_PCNOC_BUS_TIMEOUT8_BCR 48
+#define GCC_PCNOC_BUS_TIMEOUT9_BCR 49
+#define GCC_MMSS_BCR 50
+#define GCC_VENUS0_BCR 51
+#define GCC_MDSS_BCR 52
+#define GCC_CAMSS_PHY0_BCR 53
+#define GCC_CAMSS_CSI0_BCR 54
+#define GCC_CAMSS_CSI0PHY_BCR 55
+#define GCC_CAMSS_CSI0RDI_BCR 56
+#define GCC_CAMSS_CSI0PIX_BCR 57
+#define GCC_CAMSS_PHY1_BCR 58
+#define GCC_CAMSS_CSI1_BCR 59
+#define GCC_CAMSS_CSI1PHY_BCR 60
+#define GCC_CAMSS_CSI1RDI_BCR 61
+#define GCC_CAMSS_CSI1PIX_BCR 62
+#define GCC_CAMSS_ISPIF_BCR 63
+#define GCC_CAMSS_CCI_BCR 64
+#define GCC_CAMSS_MCLK0_BCR 65
+#define GCC_CAMSS_MCLK1_BCR 66
+#define GCC_CAMSS_GP0_BCR 67
+#define GCC_CAMSS_GP1_BCR 68
+#define GCC_CAMSS_TOP_BCR 69
+#define GCC_CAMSS_MICRO_BCR 70
+#define GCC_CAMSS_JPEG_BCR 71
+#define GCC_CAMSS_VFE_BCR 72
+#define GCC_CAMSS_CSI_VFE0_BCR 73
+#define GCC_OXILI_BCR 74
+#define GCC_GMEM_BCR 75
+#define GCC_CAMSS_AHB_BCR 76
+#define GCC_MDP_TBU_BCR 77
+#define GCC_GFX_TBU_BCR 78
+#define GCC_GFX_TCU_BCR 79
+#define GCC_MSS_TBU_AXI_BCR 80
+#define GCC_MSS_TBU_GSS_AXI_BCR 81
+#define GCC_MSS_TBU_Q6_AXI_BCR 82
+#define GCC_GTCU_AHB_BCR 83
+#define GCC_SMMU_CFG_BCR 84
+#define GCC_VFE_TBU_BCR 85
+#define GCC_VENUS_TBU_BCR 86
+#define GCC_JPEG_TBU_BCR 87
+#define GCC_PRONTO_TBU_BCR 88
+#define GCC_SMMU_CATS_BCR 89
+
+#endif
--
2.42.1
More information about the U-Boot
mailing list