[PATCH v1 2/3] efi_vars: Implement SPI Flash store
AKASHI Takahiro
takahiro.akashi at linaro.org
Wed Nov 22 03:38:46 CET 2023
On Tue, Nov 21, 2023 at 11:57:12PM +0000, Shantur Rathore wrote:
> Currently U-boot uses ESP as storage for EFI variables.
> Devices with SPI Flash are used for storing environment with this
> commit we allow EFI variables to be stored on SPI Flash.
>
> Signed-off-by: Shantur Rathore <i at shantur.com>
> ---
>
> include/efi_variable.h | 25 ++++++++++
> lib/efi_loader/Kconfig | 18 +++++++
> lib/efi_loader/Makefile | 1 +
> lib/efi_loader/efi_var_sf.c | 91 +++++++++++++++++++++++++++++++++++
> lib/efi_loader/efi_variable.c | 4 ++
> 5 files changed, 139 insertions(+)
> create mode 100644 lib/efi_loader/efi_var_sf.c
>
> diff --git a/include/efi_variable.h b/include/efi_variable.h
> index ca7e19d514..766dd109f5 100644
> --- a/include/efi_variable.h
> +++ b/include/efi_variable.h
> @@ -188,6 +188,31 @@ efi_status_t efi_var_from_file(void);
>
> #endif // CONFIG_EFI_VARIABLE_FILE_STORE
>
> +#ifdef CONFIG_EFI_VARIABLE_SF_STORE
Not needed as I said.
> +
> +/**
> + * efi_var_from_sf() - read variables from SPI Flash
> + *
> + * EFI variable buffer is read from SPI Flash at offset defined with
> + * CONFIG_EFI_VARIABLE_SF_OFFSET of length CONFIG_EFI_VAR_BUF_SIZE
> + *
> + *
> + * Return: status code
> + */
> +efi_status_t efi_var_from_sf(void);
> +
> +/**
> + * efi_var_to_sf() - save non-volatile variables to SPI Flash
> + *
> + * EFI variable buffer is saved to SPI Flash at offset defined with
> + * CONFIG_EFI_VARIABLE_SF_OFFSET of length CONFIG_EFI_VAR_BUF_SIZE.
> + *
> + * Return: status code
> + */
> +efi_status_t efi_var_to_sf(void);
> +
> +#endif // CONFIG_EFI_VARIABLE_SF_STORE
> +
> /**
> * efi_var_mem_init() - set-up variable list
> *
> diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
> index 4ccd26f94a..1fcc6fabb4 100644
> --- a/lib/efi_loader/Kconfig
> +++ b/lib/efi_loader/Kconfig
> @@ -54,6 +54,17 @@ config EFI_VARIABLE_FILE_STORE
> Select this option if you want non-volatile UEFI variables to be
> stored as file /ubootefi.var on the EFI system partition.
>
> +config EFI_VARIABLE_SF_STORE
> + bool "Store non-volatile UEFI variables in SPI Flash"
> + depends on SPI_FLASH
> + help
> + Select this option if you want non-volatile UEFI variables to be
> + stored in SPI Flash.
> + Define CONFIG_EFI_VARIABLE_SF_OFFSET as offset in SPI Flash to use as
> + the storage for variables. CONFIG_EFI_VAR_BUF_SIZE defines the space
> + needed.
> +
> +
> config EFI_MM_COMM_TEE
> bool "UEFI variables storage service via the trusted world"
> depends on OPTEE
> @@ -108,6 +119,13 @@ config EFI_VARIABLE_NO_STORE
>
> endchoice
>
> +config EFI_VARIABLE_SF_OFFSET
> + hex "EFI variables in SPI flash offset"
> + depends on EFI_VARIABLE_SF_STORE
> + default 0x7D0000
The default value is definitely board-specific.
Please add "if TARGET_ROCKPRO64_RK3399(?)".
> + help
> + Offset from the start of the SPI Flash where EFI variables will be stored.
> +
> config EFI_VARIABLES_PRESEED
> bool "Initial values for UEFI variables"
> depends on !EFI_MM_COMM_TEE
> diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
> index 8d31fc61c6..b9b715b1ff 100644
> --- a/lib/efi_loader/Makefile
> +++ b/lib/efi_loader/Makefile
> @@ -67,6 +67,7 @@ obj-$(CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2) += efi_unicode_collation.o
> obj-y += efi_var_common.o
> obj-y += efi_var_mem.o
> obj-y += efi_var_file.o
> +obj-$(CONFIG_EFI_VARIABLE_SF_STORE) += efi_var_sf.o
> ifeq ($(CONFIG_EFI_MM_COMM_TEE),y)
> obj-y += efi_variable_tee.o
> else
> diff --git a/lib/efi_loader/efi_var_sf.c b/lib/efi_loader/efi_var_sf.c
> new file mode 100644
> index 0000000000..e604a2225c
> --- /dev/null
> +++ b/lib/efi_loader/efi_var_sf.c
> @@ -0,0 +1,91 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * File interface for UEFI variables
For Spi Flash?
> + *
> + * Copyright (c) 2023, Shantur Rtahore
> + */
> +
> +#define LOG_CATEGORY LOGC_EFI
> +
> +#include <efi_loader.h>
> +#include <efi_variable.h>
> +#include <spi_flash.h>
> +#include <dm.h>
> +
> +efi_status_t efi_var_to_sf(void)
> +{
> + efi_status_t ret;
> + struct efi_var_file *buf;
> + loff_t len;
> + struct udevice *sfdev;
> +
> + ret = efi_var_collect(&buf, &len, EFI_VARIABLE_NON_VOLATILE);
> + if (len > EFI_VAR_BUF_SIZE) {
> + log_err("EFI var buffer length more than target SF size");
> + ret = EFI_BAD_BUFFER_SIZE;
> + goto error;
> + }
> +
> + debug("%s - Got buffer to write buf->len : %d\n", __func__, buf->length);
log_debug()?
> +
> + if (ret != EFI_SUCCESS)
> + goto error;
> +
> + ret = uclass_get_device(UCLASS_SPI_FLASH, 0, &sfdev);
> + if (ret)
> + goto error;
> +
> + ret = spi_flash_erase_dm(sfdev, CONFIG_EFI_VARIABLE_SF_OFFSET, EFI_VAR_BUF_SIZE);
> + debug("%s - Erased SPI Flash offset %lx\n", __func__, CONFIG_EFI_VARIABLE_SF_OFFSET);
> + if (ret)
> + goto error;
> +
> + ret = spi_flash_write_dm(sfdev, CONFIG_EFI_VARIABLE_SF_OFFSET, len, buf);
> + debug("%s - Wrote buffer to SPI Flash : %ld\n", __func__, ret);
> +
> + if (ret)
> + goto error;
> +
> + ret = EFI_SUCCESS;
> +error:
> + if (ret)
> + log_err("Failed to persist EFI variables in SF\n");
> + free(buf);
> + return ret;
> +}
> +
> +efi_status_t efi_var_from_sf(void)
> +{
> + struct efi_var_file *buf;
> + efi_status_t ret;
> + struct udevice *sfdev;
> +
> + buf = calloc(1, EFI_VAR_BUF_SIZE);
> + if (!buf) {
> + log_err("Out of memory\n");
I hope that we see a more specific diag message here.
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + ret = uclass_get_device(UCLASS_SPI_FLASH, 0, &sfdev);
> + if (ret)
> + goto error;
> +
> + ret = spi_flash_read_dm(sfdev, CONFIG_EFI_VARIABLE_SF_OFFSET,
> + EFI_VAR_BUF_SIZE, buf);
> +
> + debug("%s - read buffer buf->length: %x\n", __func__, buf->length);
> +
> + if (ret || buf->length < sizeof(struct efi_var_file)) {
> + log_err("Failed to load EFI variables\n");
I hope that we see a more specific diag message here.
> + goto error;
> + }
> +
> + ret = efi_var_restore(buf, false);
> + if (ret != EFI_SUCCESS)
> + log_err("Invalid EFI variables file\n");
> +
> + ret = EFI_SUCCESS;
> +error:
> + free(buf);
> + return ret;
> +}
> diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c
> index 7fa444451d..0f85962f05 100644
> --- a/lib/efi_loader/efi_variable.c
> +++ b/lib/efi_loader/efi_variable.c
> @@ -360,6 +360,8 @@ efi_status_t efi_set_variable_int(const u16 *variable_name,
> if (attributes & EFI_VARIABLE_NON_VOLATILE) {
> #ifdef CONFIG_EFI_VARIABLE_FILE_STORE
> efi_var_to_file();
> +#elif CONFIG_EFI_VARIABLE_SF_STORE
> + efi_var_to_sf();
if (CONFIG_IS_ENABLED(EFI_VARIABLE_SF_STORE))
efi_var_to_sf();
-Takahiro Akashi
> #endif
> }
>
> @@ -471,6 +473,8 @@ efi_status_t efi_init_variables(void)
>
> #ifdef CONFIG_EFI_VARIABLE_FILE_STORE
> ret = efi_var_from_file();
> +#elif CONFIG_EFI_VARIABLE_SF_STORE
> + ret = efi_var_from_sf();
> #else
> ret = EFI_SUCCESS;
> #endif
> --
> 2.40.1
>
More information about the U-Boot
mailing list