[PATCH] remoteproc: k3-dsp: Avoid reloading of firmware

[Udit Kumar]

DSP core is going into abnormal state when load callback is called
after starting of DSP core.
Reload of firmware needs core to be stopped first, followed by
load.
So avoid loading of firmware, when core is started.

Signed-off-by: Udit Kumar <u-kumar1 at ti.com>
---
 drivers/remoteproc/ti_k3_dsp_rproc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/remoteproc/ti_k3_dsp_rproc.c b/drivers/remoteproc/ti_k3_dsp_rproc.c
index 576de4bb26..daf6eae90a 100644
--- a/drivers/remoteproc/ti_k3_dsp_rproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_rproc.c
@@ -63,6 +63,7 @@ struct k3_dsp_privdata {
 	struct k3_dsp_boot_data *data;
 	struct k3_dsp_mem *mem;
 	int num_mems;
+	bool in_use;
 };
 
 /*
@@ -128,6 +129,13 @@ static int k3_dsp_load(struct udevice *dev, ulong addr, ulong size)
 	u32 boot_vector;
 	int ret;
 
+	if (dsp->in_use) {
+		dev_err(dev,
+			"Invalid op: Trying to load/start on already running core %d\n",
+			dsp->tsp.proc_id);
+		return -EINVAL;
+	}
+
 	dev_dbg(dev, "%s addr = 0x%lx, size = 0x%lx\n", __func__, addr, size);
 	ret = ti_sci_proc_request(&dsp->tsp);
 	if (ret)
@@ -195,6 +203,7 @@ static int k3_dsp_start(struct udevice *dev)
 			ti_sci_proc_power_domain_off(&dsp->tsp);
 	}
 
+	dsp->in_use = true;
 proc_release:
 	ti_sci_proc_release(&dsp->tsp);
 
@@ -207,6 +216,7 @@ static int k3_dsp_stop(struct udevice *dev)
 
 	dev_dbg(dev, "%s\n", __func__);
 
+	dsp->in_use = false;
 	ti_sci_proc_request(&dsp->tsp);
 	reset_assert(&dsp->dsp_rst);
 	ti_sci_proc_power_domain_off(&dsp->tsp);
-- 
2.34.1