[PATCH v4 08/16] remoteproc: k3-dsp: Extend support for C71x DSPs on J784S4 SoCs

[Apurva Nandan]

From: Hari Nagalla <hnagalla at ti.com>

The K3 J784S4 SoC has four C71x DSP subsystems in MAIN voltage domain.
The C71x DSPs are 64 bit machine with fixed and floating point DSP
operations. The C71x DSP subsystem is a slightly updated version of the
C71x DSP subsystem on J721E. And, same IP data can be used for J7200,
J721S2 and J784S4.

Extend support to the C71x DSPs for J784S4 with J721S2 compatible
string.

Signed-off-by: Hari Nagalla <hnagalla at ti.com>
Signed-off-by: Apurva Nandan <a-nandan at ti.com>
---
 drivers/remoteproc/ti_k3_dsp_rproc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/ti_k3_dsp_rproc.c b/drivers/remoteproc/ti_k3_dsp_rproc.c
index 1a2e9dd1f5..d856e31db8 100644
--- a/drivers/remoteproc/ti_k3_dsp_rproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_rproc.c
@@ -327,7 +327,8 @@ static int k3_dsp_of_get_memories(struct udevice *dev)
 
 	for (i = 0; i < dsp->num_mems; i++) {
 		/* C71 cores only have a L1P Cache, there are no L1P SRAMs */
-		if (device_is_compatible(dev, "ti,j721e-c71-dsp") &&
+		if (((device_is_compatible(dev, "ti,j721e-c71-dsp")) ||
+		     (device_is_compatible(dev, "ti,j721s2-c71-dsp"))) &&
 		    !strcmp(mem_names[i], "l1pram")) {
 			dsp->mem[i].bus_addr = FDT_ADDR_T_NONE;
 			dsp->mem[i].dev_addr = FDT_ADDR_T_NONE;
@@ -446,6 +447,7 @@ static const struct k3_dsp_boot_data c71_data = {
 static const struct udevice_id k3_dsp_ids[] = {
 	{ .compatible = "ti,j721e-c66-dsp", .data = (ulong)&c66_data, },
 	{ .compatible = "ti,j721e-c71-dsp", .data = (ulong)&c71_data, },
+	{ .compatible = "ti,j721s2-c71-dsp", .data = (ulong)&c71_data, },
 	{}
 };
 
-- 
2.34.1