[PATCH v4 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation
Apurva Nandan
a-nandan at ti.com
Sun Oct 1 18:55:45 CEST 2023
TI K3 J784S4 and AM69 are new additions to the K3 SoC family.
Add documentation about the J784S4 EVM and AM69 SK.
Signed-off-by: Dasnavis Sabiya <sabiya.d at ti.com>
Signed-off-by: Apurva Nandan <a-nandan at ti.com>
---
board/ti/j784s4/MAINTAINERS | 1 +
doc/board/ti/j784s4_evm.rst | 339 ++++++++++++++++++++++++++++++++++++
doc/board/ti/k3.rst | 1 +
3 files changed, 341 insertions(+)
create mode 100644 doc/board/ti/j784s4_evm.rst
diff --git a/board/ti/j784s4/MAINTAINERS b/board/ti/j784s4/MAINTAINERS
index 5b5ef8b109..24db43f09b 100644
--- a/board/ti/j784s4/MAINTAINERS
+++ b/board/ti/j784s4/MAINTAINERS
@@ -15,6 +15,7 @@ F: arch/arm/dts/k3-j784s4-evm-u-boot.dtsi
F: arch/arm/dts/k3-j784s4-r5-evm.dts
F: arch/arm/dts/k3-j784s4-ddr.dtsi
F: arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi
+F: doc/board/ti/j784s4_evm.rst
AM69 BOARD
F: arch/arm/dts/k3-am69-sk.dts
diff --git a/doc/board/ti/j784s4_evm.rst b/doc/board/ti/j784s4_evm.rst
new file mode 100644
index 0000000000..c04894b47a
--- /dev/null
+++ b/doc/board/ti/j784s4_evm.rst
@@ -0,0 +1,339 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
+.. sectionauthor:: Apurva Nandan <a-nandan at ti.com>
+
+J784S4 and AM69 Platforms
+=========================
+
+Introduction
+------------
+The J784S4 SoC belongs to the K3 Multicore SoC architecture
+platform, providing advanced system integration in automotive,
+ADAS and industrial applications requiring AI at the network edge.
+This SoC extends the K3 Jacinto 7 family of SoCs with focus on
+raising performance and integration while providing interfaces,
+memory architecture and compute performance for multi-sensor, high
+concurrency applications.
+
+The device is partitioned into three functional domains, each containing
+specific processing cores and peripherals:
+
+1. Wake-up (WKUP) domain
+ * ARM Cortex-M4F processor, runs TI Foundational Security (TIFS)
+
+2. Microcontroller (MCU) domain
+ * Dual core ARM Cortex-R5F processor, runs device management
+ and SoC early boot
+
+3. MAIN domain
+ * Dual core 64-bit ARM Cortex-A72, runs HLOS
+
+More info can be found in TRM: http://www.ti.com/lit/zip/spruj52
+
+Platform information:
+
+* https://www.ti.com/tool/J784S4XEVM
+* https://www.ti.com/tool/SK-AM69
+
+Boot Flow
+---------
+Below is the pictorial representation of boot flow:
+
+.. image:: img/boot_diagram_k3_current.svg
+
+- On this platform, "TI Foundational Security (TIFS)" functions as the
+ security enclave master. While "Device Manager (DM)", also known as the
+ "TISCI server" in TI terminology, offers all the essential services.
+
+- As illustrated in the diagram above, R5 SPL manages power and clock
+ services independently before handing over control to DM. The A72 or
+ the C7x (Aux core) software components request TIFS/DM to handle
+ security or device management services.
+
+Sources
+-------
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_sources
+ :end-before: .. k3_rst_include_end_boot_sources
+
+Build procedure
+---------------
+0. Setup the environment variables:
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_common_env_vars_desc
+ :end-before: .. k3_rst_include_end_common_env_vars_desc
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_board_env_vars_desc
+ :end-before: .. k3_rst_include_end_board_env_vars_desc
+
+Set the variables corresponding to this platform:
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_common_env_vars_defn
+ :end-before: .. k3_rst_include_end_common_env_vars_defn
+.. code-block:: bash
+
+ $ export UBOOT_CFG_CORTEXR=j784s4_evm_r5_defconfig
+ $ export UBOOT_CFG_CORTEXA=j784s4_evm_a72_defconfig
+ $ export TFA_BOARD=generic
+ $ export TFA_EXTRA_ARGS="K3_USART=0x8"
+ $ export OPTEE_PLATFORM=k3-j784s4
+ $ export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8"
+
+.. j784s4_evm_rst_include_start_build_steps
+
+1. Trusted Firmware-A
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_build_steps_tfa
+ :end-before: .. k3_rst_include_end_build_steps_tfa
+
+
+2. OP-TEE
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_build_steps_optee
+ :end-before: .. k3_rst_include_end_build_steps_optee
+
+3. U-Boot
+
+.. _j784s4_evm_rst_u_boot_r5:
+
+* 3.1 R5
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_build_steps_spl_r5
+ :end-before: .. k3_rst_include_end_build_steps_spl_r5
+
+.. _j784s4_evm_rst_u_boot_a72:
+
+* 3.2 A72
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_build_steps_uboot
+ :end-before: .. k3_rst_include_end_build_steps_uboot
+.. j784s4_evm_rst_include_end_build_steps
+
+Target Images
+-------------
+In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC
+variant (GP, HS-FS, HS-SE) requires a different source for these files.
+
+ - GP
+
+ * tiboot3-j784s4-gp-evm.bin from :ref:`step 3.1 <j784s4_evm_rst_u_boot_r5>`
+ * tispl.bin_unsigned, u-boot.img_unsigned from :ref:`step 3.2 <j784s4_evm_rst_u_boot_a72>`
+
+ - HS-FS
+
+ * tiboot3-j784s4-hs-fs-evm.bin from :ref:`step 3.1 <j784s4_evm_rst_u_boot_r5>`
+ * tispl.bin, u-boot.img from :ref:`step 3.2 <j784s4_evm_rst_u_boot_a72>`
+
+ - HS-SE
+
+ * tiboot3-j784s4-hs-evm.bin from :ref:`step 3.1 <j784s4_evm_rst_u_boot_r5>`
+ * tispl.bin, u-boot.img from :ref:`step 3.2 <j784s4_evm_rst_u_boot_a72>`
+
+Image formats
+-------------
+
+- tiboot3.bin
+
+.. image:: img/multi_cert_tiboot3.bin.svg
+
+- tispl.bin
+
+.. image:: img/dm_tispl.bin.svg
+
+R5 Memory Map
+-------------
+
+.. list-table::
+ :widths: 16 16 16
+ :header-rows: 1
+
+ * - Region
+ - Start Address
+ - End Address
+
+ * - SPL
+ - 0x41c00000
+ - 0x41c40000
+
+ * - EMPTY
+ - 0x41c40000
+ - 0x41c61f20
+
+ * - STACK
+ - 0x41c65f20
+ - 0x41c61f20
+
+ * - Global data
+ - 0x41c65f20
+ - 0x41c66000
+
+ * - Heap
+ - 0x41c66000
+ - 0x41c76000
+
+ * - BSS
+ - 0x41c76000
+ - 0x41c80000
+
+ * - DM DATA
+ - 0x41c80000
+ - 0x41c84130
+
+ * - EMPTY
+ - 0x41c84130
+ - 0x41cff9fc
+
+ * - MCU Scratchpad
+ - 0x41cff9fc
+ - 0x41cffbfc
+
+ * - ROM DATA
+ - 0x41cffbfc
+ - 0x41cfffff
+
+Switch Setting for Boot Mode
+----------------------------
+
+Boot Mode pins provide means to select the boot mode and options before the
+device is powered up. After every POR, they are the main source to populate
+the Boot Parameter Tables.
+
+Boot Mode Pins for J784S4-EVM
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following tables show some common boot modes used on J784S4 SoC platform.
+More details can be found in the Technical Reference Manual:
+http://www.ti.com/lit/zip/spruj52 under the `Boot Mode Pins` section.
+
+.. list-table:: J784S4 EVM Boot Modes
+ :widths: 16 16 16
+ :header-rows: 1
+
+ * - Switch Label
+ - SW9: 12345678
+ - SW8: 12345678
+
+ * - SD
+ - 00000000
+ - 10000010
+
+ * - EMMC
+ - 01000000
+ - 10000000
+
+ * - OSPI
+ - 01000000
+ - 00000110
+
+ * - UART
+ - 01110000
+ - 00000000
+
+ * - USB DFU
+ - 00100000
+ - 10000000
+
+For SW8 and SW9, the switch state in the "ON" position = 1.
+
+Boot Mode Pins for AM69-SK
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following table show some common boot modes used on AM69-SK platform.
+More details can be found in the User Guide for AM69-SK:
+https://www.ti.com/lit/ug/spruj70/spruj70.pdf under the `Bootmode Settings`
+section.
+
+.. list-table:: AM69 SK Boot Modes
+ :widths: 16 16
+ :header-rows: 1
+
+ * - Switch Label
+ - SW2: 1234
+
+ * - SD
+ - 0000
+
+ * - EMMC
+ - 0110
+
+ * - OSPI
+ - 1110
+
+ * - UART
+ - 1010
+
+For SW2, the switch state in the "ON" position = 1.
+
+Debugging U-Boot
+----------------
+
+See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for
+detailed setup information.
+
+.. warning::
+
+ **OpenOCD support since**: v0.12.0
+
+ If the default package version of OpenOCD in your development
+ environment's distribution needs to be updated, it might be necessary to
+ build OpenOCD from the source.
+
+Debugging U-Boot on J784S4-EVM
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_openocd_connect_XDS110
+ :end-before: .. k3_rst_include_end_openocd_connect_XDS110
+
+To start OpenOCD and connect to the board
+
+.. code-block:: bash
+
+ openocd -f board/ti_j784s4evm.cfg
+
+Debugging U-Boot on SK-AM69
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_openocd_connect_cti20
+ :end-before: .. k3_rst_include_end_openocd_connect_cti20
+
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_openocd_cfg_external_intro
+ :end-before: .. k3_rst_include_end_openocd_cfg_external_intro
+
+For SK-AM69, the openocd_connect.cfg is as follows:
+
+.. code-block:: tcl
+
+ # TUMPA example:
+ # http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User's_Manual
+ source [find interface/ftdi/tumpa.cfg]
+
+ transport select jtag
+
+ # default JTAG configuration has only SRST and no TRST
+ reset_config srst_only srst_push_pull
+
+ # delay after SRST goes inactive
+ adapter srst delay 20
+
+ if { ![info exists SOC] } {
+ # Set the SoC of interest
+ set SOC j784s4
+ }
+
+ source [find target/ti_k3.cfg]
+
+ ftdi tdo_sample_edge falling
+
+ # Speeds for FT2232H are in multiples of 2, and 32MHz is tops
+ # max speed we seem to achieve is ~20MHz.. so we pick 16MHz
+ adapter speed 16000
diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst
index ec447358ac..60aacdac99 100644
--- a/doc/board/ti/k3.rst
+++ b/doc/board/ti/k3.rst
@@ -35,6 +35,7 @@ K3 Based SoCs
am65x_evm
j7200_evm
j721e_evm
+ j784s4_evm
Boot Flow Overview
------------------
--
2.34.1
More information about the U-Boot
mailing list