[PATCH] arm: dts: k3-am625-beagleplay: Fix Boot

[Nishanth Menon]

Since commit [1] A53 u-boot proper is broken. This is because nodes
marked as 'bootph-pre-ram' are not available at u-boot proper before
relocation.

To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'.

[1]
9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")

Reported-by: Roger Quadros <rogerq at kernel.org>
Signed-off-by: Nishanth Menon <nm at ti.com>
---

Based on Roger's series:
https://lore.kernel.org/all/20230929134646.214781-1-rogerq@kernel.org/

Based on:
  next                       e29b932aa07f Merge branch '2023-09-30-Kconfig-updates' into next

See discussion thread:
https://lore.kernel.org/all/CAPnjgZ3MgWX8T0A0SofphEr_Xd77pE3hte9DNye1RuBVeB9N8Q@mail.gmail.com/

 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 70 ++++++++++----------
 1 file changed, 35 insertions(+), 35 deletions(-)

diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index f8c04e8a300a..d6c6baa5518b 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -14,143 +14,143 @@
 	};
 
 	memory at 80000000 {
-		bootph-pre-ram;
+		bootph-all;
 	};
 
 	/* Keep the LEDs on by default to indicate life */
 	leds {
-		bootph-pre-ram;
+		bootph-all;
 		led-0 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
 
 		led-1 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
 
 		led-2 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
 
 		led-3 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
 
 		led-4 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
 	};
 };
 
 &cbass_main {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_timer0 {
 	clock-frequency = <25000000>;
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &dmss {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &secure_proxy_main {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &dmsc {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &k3_pds {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &k3_clks {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &k3_reset {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &dmsc {
-	bootph-pre-ram;
+	bootph-all;
 	k3_sysreset: sysreset-controller {
 		compatible = "ti,sci-sysreset";
-		bootph-pre-ram;
+		bootph-all;
 	};
 };
 
 &wkup_conf {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &chipid {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_pmx0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_uart0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &console_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &cbass_mcu {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &cbass_wakeup {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &mcu_pmx0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_i2c0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &local_i2c_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &gpio0_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_gpio0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_gpio1 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &sdhci0 {
 	/* EMMC */
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &emmc_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &sd_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 	/* Force to use SDCD card detect pin */
 	pinctrl-single,pins = <
 		AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
@@ -164,11 +164,11 @@
 };
 
 &tps65219 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &sdhci1 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 #ifdef CONFIG_TARGET_AM625_A53_EVM
-- 
2.40.0