[PATCH v1 4/8] phy: move clk enable/disable in init/exit

[Alexey Romanov]

It is better to place clk_enable() in phy_meson_g12a_usb2_init()
and clk_disable() in phy_meson_g12a_usb2_exit().

For more detailed information, please see comments in the review of
a similar driver in the Linux Kernel:

https://lore.kernel.org/all/CAFBinCCEhobbyKHuKDWzTYCQWgNT1-e8=7hMhq1mvT6CuEOjGw@mail.gmail.com/

Signed-off-by: Alexey Romanov <avromanov at salutedevices.com>
---
 drivers/phy/meson-g12a-usb2.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/phy/meson-g12a-usb2.c b/drivers/phy/meson-g12a-usb2.c
index 2e366b16ae..7b028784a0 100644
--- a/drivers/phy/meson-g12a-usb2.c
+++ b/drivers/phy/meson-g12a-usb2.c
@@ -160,6 +160,14 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
 	struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
 	int ret;
 
+#if CONFIG_IS_ENABLED(CLK)
+	ret = clk_enable(&priv->clk);
+	if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
+		pr_err("failed to enable PHY clock\n");
+		return ret;
+	}
+#endif
+
 	ret = reset_assert(&priv->reset);
 	udelay(1);
 	ret |= reset_deassert(&priv->reset);
@@ -252,6 +260,10 @@ static int phy_meson_g12a_usb2_exit(struct phy *phy)
 	struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
 	int ret;
 
+#if CONFIG_IS_ENABLED(CLK)
+	clk_disable(&priv->clk);
+#endif
+
 	ret = reset_assert(&priv->reset);
 	if (ret)
 		return ret;
@@ -289,13 +301,6 @@ int meson_g12a_usb2_phy_probe(struct udevice *dev)
 	ret = clk_get_by_index(dev, 0, &priv->clk);
 	if (ret < 0)
 		return ret;
-
-	ret = clk_enable(&priv->clk);
-	if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
-		pr_err("failed to enable PHY clock\n");
-		clk_free(&priv->clk);
-		return ret;
-	}
 #endif
 
 	return 0;
-- 
2.25.1