[PATCH v1 7/8] dwc3: add support for Amlogic A1 family

[Alexey Romanov]

Now the driver supports also A1 phy layer.

Signed-off-by: Alexey Romanov <avromanov at salutedevices.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 73 ++++++++++++++++++++++++++----
 1 file changed, 63 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 90418ddc1d..550e6682a2 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -28,6 +28,7 @@
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/compat.h>
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
 
 /* USB2 Ports Control Registers */
 
@@ -102,10 +103,22 @@ enum {
 	PHY_COUNT,
 };
 
-static const char *phy_names[PHY_COUNT] = {
+static const char *const dwc3_meson_g12a_phy_names[] = {
 	"usb2-phy0", "usb2-phy1", "usb3-phy0",
 };
 
+static const char *const dwc3_meson_a1_phy_names[] = {
+	"usb2-phy0", "usb2-phy1"
+};
+
+struct dwc3_meson_g12a;
+
+struct dwc3_meson_g12a_drvdata {
+	const char *const *phy_names;
+	unsigned int phy_cnt;
+	int (*clk_init)(struct dwc3_meson_g12a *priv);
+};
+
 struct dwc3_meson_g12a {
 	struct udevice		*dev;
 	struct regmap           *regmap;
@@ -119,6 +132,7 @@ struct dwc3_meson_g12a {
 #if CONFIG_IS_ENABLED(DM_REGULATOR)
 	struct udevice		*vbus_supply;
 #endif
+	struct dwc3_meson_g12a_drvdata *drvdata;
 };
 
 #define U2P_REG_SIZE						0x20
@@ -293,10 +307,11 @@ int dwc3_meson_g12a_force_mode(struct udevice *dev, enum usb_dr_mode mode)
 
 static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv)
 {
+	struct dwc3_meson_g12a_drvdata *data = priv->drvdata;
 	int i, ret;
 
-	for (i = 0 ; i < PHY_COUNT ; ++i) {
-		ret = generic_phy_get_by_name(priv->dev, phy_names[i],
+	for (i = 0 ; i < data->phy_cnt; ++i) {
+		ret = generic_phy_get_by_name(priv->dev, data->phy_names[i],
 					      &priv->phys[i]);
 		if (ret == -ENOENT || ret == -ENODATA)
 			continue;
@@ -354,18 +369,36 @@ static int dwc3_meson_g12a_clk_init(struct dwc3_meson_g12a *priv)
 	return 0;
 }
 
+static int dwc3_meson_a1_clk_init(struct dwc3_meson_g12a *priv)
+{
+	int ret;
+
+	ret = clk_get_by_name(priv->dev, "usb_bus", &priv->clk);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(&priv->clk);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static int dwc3_meson_g12a_probe(struct udevice *dev)
 {
 	struct dwc3_meson_g12a *priv = dev_get_plat(dev);
+	struct dwc3_meson_g12a_drvdata *data =
+		(struct dwc3_meson_g12a_drvdata *)dev_get_driver_data(dev);
 	int ret, i;
 
+	priv->drvdata = data;
 	priv->dev = dev;
 
 	ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
 	if (ret)
 		return ret;
 
-	ret = dwc3_meson_g12a_clk_init(priv);
+	ret = data->clk_init(priv);
 	if (ret)
 		return ret;
 
@@ -398,7 +431,7 @@ static int dwc3_meson_g12a_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
-	for (i = 0 ; i < PHY_COUNT ; ++i) {
+	for (i = 0 ; i < data->phy_cnt; ++i) {
 		if (!priv->phys[i].dev)
 			continue;
 
@@ -407,7 +440,7 @@ static int dwc3_meson_g12a_probe(struct udevice *dev)
 			goto err_phy_init;
 	}
 
-	for (i = 0; i < PHY_COUNT; ++i) {
+	for (i = 0; i < data->phy_cnt; ++i) {
 		if (!priv->phys[i].dev)
 			continue;
 
@@ -419,7 +452,7 @@ static int dwc3_meson_g12a_probe(struct udevice *dev)
 	return 0;
 
 err_phy_init:
-	for (i = 0 ; i < PHY_COUNT ; ++i) {
+	for (i = 0 ; i < data->phy_cnt ; ++i) {
 		if (!priv->phys[i].dev)
 			continue;
 
@@ -432,20 +465,21 @@ err_phy_init:
 static int dwc3_meson_g12a_remove(struct udevice *dev)
 {
 	struct dwc3_meson_g12a *priv = dev_get_plat(dev);
+	struct dwc3_meson_g12a_drvdata *data = priv->drvdata;
 	int i;
 
 	reset_release_all(&priv->reset, 1);
 
 	clk_release_all(&priv->clk, 1);
 
-	for (i = 0; i < PHY_COUNT; ++i) {
+	for (i = 0; i < data->phy_cnt; ++i) {
 		if (!priv->phys[i].dev)
 			continue;
 
 		 generic_phy_power_off(&priv->phys[i]);
 	}
 
-	for (i = 0 ; i < PHY_COUNT ; ++i) {
+	for (i = 0 ; i < data->phy_cnt; ++i) {
 		if (!priv->phys[i].dev)
 			continue;
 
@@ -455,8 +489,27 @@ static int dwc3_meson_g12a_remove(struct udevice *dev)
 	return dm_scan_fdt_dev(dev);
 }
 
+static const struct dwc3_meson_g12a_drvdata meson_g12a_drvdata = {
+	.phy_names = dwc3_meson_g12a_phy_names,
+	.phy_cnt = ARRAY_SIZE(dwc3_meson_g12a_phy_names),
+	.clk_init = dwc3_meson_g12a_clk_init,
+};
+
+static const struct dwc3_meson_g12a_drvdata meson_a1_drvdata = {
+	.phy_names = dwc3_meson_a1_phy_names,
+	.phy_cnt = ARRAY_SIZE(dwc3_meson_a1_phy_names),
+	.clk_init = dwc3_meson_a1_clk_init,
+};
+
 static const struct udevice_id dwc3_meson_g12a_ids[] = {
-	{ .compatible = "amlogic,meson-g12a-usb-ctrl" },
+	{
+		.compatible = "amlogic,meson-g12a-usb-ctrl",
+		.data = (ulong)&meson_g12a_drvdata,
+	},
+	{
+		.compatible = "amlogic,meson-a1-usb-ctrl",
+		.data = (ulong)&meson_a1_drvdata,
+	},
 	{ }
 };
 
-- 
2.25.1