[PATCH v1 8/8] arch: a1: introduce USB initialization functionality
neil.armstrong at linaro.org
neil.armstrong at linaro.org
Tue Oct 3 09:24:24 CEST 2023
Hi,
On 02/10/2023 18:58, Alexey Romanov wrote:
> This is entrypoint for USB stack initialization. Function
> board_usb_init will be called from cmd/fastboot.c code.
This should not be needed anymore, using DM_USB_GADGET should work,
look how it was changed for G12A/SM1 and GXL/AXG:
https://lore.kernel.org/all/20221024-meson-dm-usb-v1-0-2ab077a503b9@baylibre.com
and
https://lore.kernel.org/all/20230117-u-boot-usb-gxl-otg-dm-v1-0-2853f6d75b06@linaro.org
Neil
>
> Signed-off-by: Alexey Romanov <avromanov at salutedevices.com>
> ---
> arch/arm/mach-meson/board-a1.c | 89 ++++++++++++++++++++++++++++++++++
> 1 file changed, 89 insertions(+)
>
> diff --git a/arch/arm/mach-meson/board-a1.c b/arch/arm/mach-meson/board-a1.c
> index 967bb67182..781d5cfb33 100644
> --- a/arch/arm/mach-meson/board-a1.c
> +++ b/arch/arm/mach-meson/board-a1.c
> @@ -4,12 +4,17 @@
> */
>
> #include <common.h>
> +#include <dm.h>
> +#include <usb.h>
> #include <asm/arch/a1.h>
> #include <asm/arch/boot.h>
> #include <asm/armv8/mmu.h>
> #include <asm/io.h>
> #include <linux/compiler.h>
> #include <linux/sizes.h>
> +#include <linux/usb/otg.h>
> +#include <asm/arch/usb.h>
> +#include <usb/dwc2_udc.h>
>
> phys_size_t get_effective_memsize(void)
> {
> @@ -57,3 +62,87 @@ static struct mm_region a1_mem_map[] = {
> };
>
> struct mm_region *mem_map = a1_mem_map;
> +
> +#if CONFIG_IS_ENABLED(USB_DWC3_MESON_G12A) && \
> + CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
> +
> +static struct dwc2_plat_otg_data meson_a1_dwc2_data;
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> + int node, dwc2_node;
> + const void *blob = gd->fdt_blob;
> + struct udevice *dev;
> + int ret;
> +
> + node = fdt_node_offset_by_compatible(blob, -1,
> + "amlogic,meson-a1-usb-ctrl");
> + if (node < 0) {
> + pr_err("not found usb-control node\n");
> + return -ENODEV;
> + }
> +
> + if (!fdtdec_get_is_enabled(blob, node)) {
> + pr_err("usb is disabled in the device tree\n");
> + return -ENODEV;
> + }
> +
> + ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
> + if (ret) {
> + pr_err("not found usb-control device\n");
> + return ret;
> + }
> +
> + dwc2_node = fdt_node_offset_by_compatible(blob, node,
> + "amlogic,meson-a1-usb");
> + if (dwc2_node < 0) {
> + pr_err("not found dwc2 node\n");
> + return -ENODEV;
> + }
> +
> + if (!fdtdec_get_is_enabled(blob, dwc2_node)) {
> + pr_err("dwc2 is disabled in the device tree\n");
> + return -ENODEV;
> + }
> +
> + meson_a1_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg");
> + if (meson_a1_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
> + pr_err("can't get base address\n");
> + return -ENODATA;
> + }
> +
> + meson_a1_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
> + "g-rx-fifo-size", 0);
> + if (meson_a1_dwc2_data.rx_fifo_sz < 0) {
> + pr_err("failed to get g-rx-fifo-size value\n");
> + return -ENODATA;
> + }
> +
> + meson_a1_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
> + "g-np-tx-fifo-size", 0);
> + if (meson_a1_dwc2_data.np_tx_fifo_sz < 0) {
> + pr_err("failed to get g-np-tx-fifo-size value\n");
> + return -ENODATA;
> + }
> +
> + meson_a1_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
> + "g-tx-fifo-size", 0);
> + if (meson_a1_dwc2_data.tx_fifo_sz < 0) {
> + pr_err("failed to get g-tx-fifo-size value\n");
> + return -ENODATA;
> + }
> +
> + ret = dwc3_meson_g12a_force_mode(dev, USB_DR_MODE_PERIPHERAL);
> + if (ret) {
> + pr_err("failed to force usb mode to peripheral\n");
> + return ret;
> + }
> +
> + return dwc2_udc_probe(&meson_a1_dwc2_data);
> +}
> +
> +int board_usb_cleanup(int index, enum usb_init_type init)
> +{
> + return 0;
> +}
> +#endif
More information about the U-Boot
mailing list