[PATCH v1 1/8] dt-bindings: reset: add Meson A1 reset bindings

neil.armstrong at linaro.org neil.armstrong at linaro.org
Tue Oct 3 09:24:57 CEST 2023


On 02/10/2023 18:58, Alexey Romanov wrote:
> Get this from Linux 6.6-rc3.
> 
> Signed-off-by: Alexey Romanov <avromanov at salutedevices.com>
> ---
>   .../reset/amlogic,meson-a1-reset.h            | 76 +++++++++++++++++++
>   1 file changed, 76 insertions(+)
>   create mode 100644 include/dt-bindings/reset/amlogic,meson-a1-reset.h
> 
> diff --git a/include/dt-bindings/reset/amlogic,meson-a1-reset.h b/include/dt-bindings/reset/amlogic,meson-a1-reset.h
> new file mode 100644
> index 0000000000..2c749c655e
> --- /dev/null
> +++ b/include/dt-bindings/reset/amlogic,meson-a1-reset.h
> @@ -0,0 +1,76 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + * Author: Xingyu Chen <xingyu.chen at amlogic.com>
> + *
> + * Copyright (c) 2023, SberDevices, Inc.
> + * Author: Alexey Romanov <avromanov at salutedevices.com>
> + */
> +
> +#ifndef _DT_BINDINGS_AMLOGIC_MESON_A1_RESET_H
> +#define _DT_BINDINGS_AMLOGIC_MESON_A1_RESET_H
> +
> +/*	RESET0					*/
> +/*					0	*/
> +#define RESET_AM2AXI_VAD		1
> +/*					2-3	*/
> +#define RESET_PSRAM			4
> +#define RESET_PAD_CTRL			5
> +/*					6	*/
> +#define RESET_TEMP_SENSOR		7
> +#define RESET_AM2AXI_DEV		8
> +/*					9	*/
> +#define RESET_SPICC_A			10
> +#define RESET_MSR_CLK			11
> +#define RESET_AUDIO			12
> +#define RESET_ANALOG_CTRL		13
> +#define RESET_SAR_ADC			14
> +#define RESET_AUDIO_VAD			15
> +#define RESET_CEC			16
> +#define RESET_PWM_EF			17
> +#define RESET_PWM_CD			18
> +#define RESET_PWM_AB			19
> +/*					20	*/
> +#define RESET_IR_CTRL			21
> +#define RESET_I2C_S_A			22
> +/*					23	*/
> +#define RESET_I2C_M_D			24
> +#define RESET_I2C_M_C			25
> +#define RESET_I2C_M_B			26
> +#define RESET_I2C_M_A			27
> +#define RESET_I2C_PROD_AHB		28
> +#define RESET_I2C_PROD			29
> +/*					30-31	*/
> +
> +/*	RESET1					*/
> +#define RESET_ACODEC			32
> +#define RESET_DMA			33
> +#define RESET_SD_EMMC_A			34
> +/*					35	*/
> +#define RESET_USBCTRL			36
> +/*					37	*/
> +#define RESET_USBPHY			38
> +/*					39-41	*/
> +#define RESET_RSA			42
> +#define RESET_DMC			43
> +/*					44	*/
> +#define RESET_IRQ_CTRL			45
> +/*					46	*/
> +#define RESET_NIC_VAD			47
> +#define RESET_NIC_AXI			48
> +#define RESET_RAMA			49
> +#define RESET_RAMB			50
> +/*					51-52	*/
> +#define RESET_ROM			53
> +#define RESET_SPIFC			54
> +#define RESET_GIC			55
> +#define RESET_UART_C			56
> +#define RESET_UART_B			57
> +#define RESET_UART_A			58
> +#define RESET_OSC_RING			59
> +/*					60-63	*/
> +
> +/*	RESET2					*/
> +/*					64-95	*/
> +
> +#endif

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>


More information about the U-Boot mailing list