[PATCH v2 5/8] phy: support Amlogic A1 family
Alexey Romanov
avromanov at salutedevices.com
Tue Oct 3 13:28:31 CEST 2023
Setting G12A and A1 is similar, so we can use G12A phy
driver with little changes.
Signed-off-by: Alexey Romanov <avromanov at salutedevices.com>
---
drivers/phy/Kconfig | 2 +-
drivers/phy/meson-g12a-usb2.c | 79 ++++++++++++++++++++++++++++-------
2 files changed, 66 insertions(+), 15 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index cf4d5908d7..60be62907d 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -190,7 +190,7 @@ config MESON_GXL_USB_PHY
config MESON_G12A_USB_PHY
bool "Amlogic Meson G12A USB PHYs"
- depends on PHY && ARCH_MESON && MESON_G12A
+ depends on PHY && ARCH_MESON && (MESON_G12A || MESON_A1)
imply REGMAP
help
This is the generic phy driver for the Amlogic Meson G12A
diff --git a/drivers/phy/meson-g12a-usb2.c b/drivers/phy/meson-g12a-usb2.c
index 7b028784a0..90053dbea3 100644
--- a/drivers/phy/meson-g12a-usb2.c
+++ b/drivers/phy/meson-g12a-usb2.c
@@ -18,6 +18,7 @@
#include <regmap.h>
#include <linux/delay.h>
#include <power/regulator.h>
+#include <power-domain.h>
#include <reset.h>
#include <clk.h>
@@ -146,18 +147,28 @@
#define RESET_COMPLETE_TIME 1000
#define PLL_RESET_COMPLETE_TIME 100
+enum meson_soc_id {
+ MESON_SOC_A1,
+ MESON_SOC_G12A,
+};
+
struct phy_meson_g12a_usb2_priv {
struct regmap *regmap;
#if CONFIG_IS_ENABLED(CLK)
struct clk clk;
#endif
struct reset_ctl reset;
+#if CONFIG_IS_ENABLED(POWER_DOMAIN)
+ struct power_domain pwrdm;
+#endif
+ int soc_id;
};
static int phy_meson_g12a_usb2_init(struct phy *phy)
{
struct udevice *dev = phy->dev;
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
+ u32 value;
int ret;
#if CONFIG_IS_ENABLED(CLK)
@@ -196,8 +207,7 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) |
FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9));
- regmap_write(priv->regmap, PHY_CTRL_R18,
- FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
+ value = FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
@@ -209,6 +219,11 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
PHY_CTRL_R18_MPLL_ACG_RANGE;
+ if (priv->soc_id == MESON_SOC_A1)
+ value |= PHY_CTRL_R18_MPLL_DCO_CLK_SEL;
+
+ regmap_write(priv->regmap, PHY_CTRL_R18, value);
+
udelay(PLL_RESET_COMPLETE_TIME);
/* UnReset PLL */
@@ -231,13 +246,19 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) |
FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0));
- regmap_write(priv->regmap, PHY_CTRL_R4,
- FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
- FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
- FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
- PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
- FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
- FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
+ if (priv->soc_id == MESON_SOC_G12A)
+ regmap_write(priv->regmap, PHY_CTRL_R4,
+ FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
+ FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
+ FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
+ PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
+ FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
+ FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
+ else if (priv->soc_id == MESON_SOC_A1)
+ regmap_write(priv->regmap, PHY_CTRL_R21,
+ PHY_CTRL_R21_USB2_CAL_ACK_EN |
+ PHY_CTRL_R21_USB2_TX_STRG_PD |
+ FIELD_PREP(PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0, 2));
/* Tuning Disconnect Threshold */
regmap_write(priv->regmap, PHY_CTRL_R3,
@@ -246,10 +267,15 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3));
/* Analog Settings */
- regmap_write(priv->regmap, PHY_CTRL_R14, 0);
- regmap_write(priv->regmap, PHY_CTRL_R13,
- PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
- FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+ if (priv->soc_id == MESON_SOC_G12A) {
+ regmap_write(priv->regmap, PHY_CTRL_R14, 0);
+ regmap_write(priv->regmap, PHY_CTRL_R13,
+ PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
+ FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+ } else if (priv->soc_id == MESON_SOC_A1) {
+ regmap_write(priv->regmap, PHY_CTRL_R13,
+ FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+ }
return 0;
}
@@ -281,6 +307,8 @@ int meson_g12a_usb2_phy_probe(struct udevice *dev)
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
int ret;
+ priv->soc_id = (enum meson_soc_id)dev_get_driver_data(dev);
+
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
if (ret)
return ret;
@@ -297,6 +325,22 @@ int meson_g12a_usb2_phy_probe(struct udevice *dev)
return ret;
}
+#if CONFIG_IS_ENABLED(POWER_DOMAIN)
+ ret = power_domain_get(dev, &priv->pwrdm);
+ if (ret < 0 && ret != -ENODEV) {
+ pr_err("failed to get power domain\n");
+ return ret;
+ }
+
+ if (ret != -ENODEV) {
+ ret = power_domain_on(&priv->pwrdm);
+ if (ret < 0) {
+ pr_err("failed to enable power domain\n");
+ return ret;
+ }
+ }
+#endif
+
#if CONFIG_IS_ENABLED(CLK)
ret = clk_get_by_index(dev, 0, &priv->clk);
if (ret < 0)
@@ -307,7 +351,14 @@ int meson_g12a_usb2_phy_probe(struct udevice *dev)
}
static const struct udevice_id meson_g12a_usb2_phy_ids[] = {
- { .compatible = "amlogic,g12a-usb2-phy" },
+ {
+ .compatible = "amlogic,g12a-usb2-phy",
+ .data = (ulong)MESON_SOC_G12A,
+ },
+ {
+ .compatible = "amlogic,a1-usb2-phy",
+ .data = (ulong)MESON_SOC_A1,
+ },
{ }
};
--
2.25.1
More information about the U-Boot
mailing list