[PATCHv10 14/15] net/lwip: replace original net commands with lwip
Sean Edmond
seanedmond at linux.microsoft.com
Tue Oct 3 19:58:41 CEST 2023
On 2023-09-26 2:41 a.m., Maxim Uvarov wrote:
> Replace original commands: ping, tftp, dhcp and wget.
>
> Signed-off-by: Maxim Uvarov<maxim.uvarov at linaro.org>
> ---
> boot/bootmeth_efi.c | 18 +++++++---
> boot/bootmeth_pxe.c | 21 ++++++-----
> cmd/net.c | 86 +++++----------------------------------------
> cmd/pxe.c | 19 +++++-----
> include/net.h | 8 +++--
> include/net/ulwip.h | 64 +++++++++++++++++++++++++++++++++
> 6 files changed, 113 insertions(+), 103 deletions(-)
> create mode 100644 include/net/ulwip.h
>
> diff --git a/boot/bootmeth_efi.c b/boot/bootmeth_efi.c
> index ae936c8daa..52399d627c 100644
> --- a/boot/bootmeth_efi.c
> +++ b/boot/bootmeth_efi.c
> @@ -20,6 +20,8 @@
> #include <mapmem.h>
> #include <mmc.h>
> #include <net.h>
> +#include <net/lwip.h>
> +#include <net/ulwip.h>
> #include <pxe_utils.h>
> #include <linux/sizes.h>
>
> @@ -319,9 +321,7 @@ static int distro_efi_try_bootflow_files(struct udevice *dev,
>
> static int distro_efi_read_bootflow_net(struct bootflow *bflow)
> {
> - char file_addr[17], fname[256];
> - char *tftp_argv[] = {"tftp", file_addr, fname, NULL};
> - struct cmd_tbl cmdtp = {}; /* dummy */
> + char fname[256];
> const char *addr_str, *fdt_addr_str;
> int ret, arch, size;
> ulong addr, fdt_addr;
> @@ -368,7 +368,6 @@ static int distro_efi_read_bootflow_net(struct bootflow *bflow)
> if (!fdt_addr_str)
> return log_msg_ret("fdt", -EINVAL);
> fdt_addr = hextoul(fdt_addr_str, NULL);
> - sprintf(file_addr, "%lx", fdt_addr);
>
> /* We only allow the first prefix with PXE */
> ret = distro_efi_get_fdt_name(fname, sizeof(fname), 0);
> @@ -379,7 +378,16 @@ static int distro_efi_read_bootflow_net(struct bootflow *bflow)
> if (!bflow->fdt_fname)
> return log_msg_ret("fil", -ENOMEM);
>
> - if (!do_tftpb(&cmdtp, 0, 3, tftp_argv)) {
> + ret = ulwip_init();
> + if (ret)
> + return log_msg_ret("ulwip_init", ret);
> +
> + ret = ulwip_tftp(fdt_addr, fname);
> + if (ret)
> + return log_msg_ret("ulwip_tftp", ret);
> +
> + ret = ulwip_loop();
> + if (!ret) {
> bflow->fdt_size = env_get_hex("filesize", 0);
> bflow->fdt_addr = fdt_addr;
> } else {
> diff --git a/boot/bootmeth_pxe.c b/boot/bootmeth_pxe.c
> index 8d489a11aa..fc6aabaa18 100644
> --- a/boot/bootmeth_pxe.c
> +++ b/boot/bootmeth_pxe.c
> @@ -21,6 +21,8 @@
> #include <mapmem.h>
> #include <mmc.h>
> #include <net.h>
> +#include <net/ulwip.h>
> +#include <net/lwip.h>
> #include <pxe_utils.h>
>
> static int extlinux_pxe_getfile(struct pxe_context *ctx, const char *file_path,
> @@ -116,18 +118,21 @@ static int extlinux_pxe_read_file(struct udevice *dev, struct bootflow *bflow,
> const char *file_path, ulong addr,
> ulong *sizep)
> {
> - char *tftp_argv[] = {"tftp", NULL, NULL, NULL};
> - struct pxe_context *ctx = dev_get_priv(dev);
> - char file_addr[17];
> ulong size;
> int ret;
>
> - sprintf(file_addr, "%lx", addr);
> - tftp_argv[1] = file_addr;
> - tftp_argv[2] = (void *)file_path;
> + ret = ulwip_init();
> + if (ret)
> + return log_msg_ret("ulwip_init", ret);
> +
> + ret = ulwip_tftp(addr, file_path);
> + if (ret)
> + return log_msg_ret("ulwip_tftp", ret);
> +
> + ret = ulwip_loop();
> + if (ret)
> + return log_msg_ret("ulwip_loop", ret);
>
> - if (do_tftpb(ctx->cmdtp, 0, 3, tftp_argv))
> - return -ENOENT;
> ret = pxe_get_file_size(&size);
> if (ret)
> return log_msg_ret("tftp", ret);
> diff --git a/cmd/net.c b/cmd/net.c
> index d407d8320a..dc5a114309 100644
> --- a/cmd/net.c
> +++ b/cmd/net.c
> @@ -22,6 +22,7 @@
> #include <net/udp.h>
> #include <net/sntp.h>
> #include <net/ncsi.h>
> +#include <net/lwip.h>
>
> static int netboot_common(enum proto_t, struct cmd_tbl *, int, char * const []);
>
> @@ -40,19 +41,9 @@ U_BOOT_CMD(
> #endif
>
> #ifdef CONFIG_CMD_TFTPBOOT
> -int do_tftpb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
> -{
> - int ret;
> -
> - bootstage_mark_name(BOOTSTAGE_KERNELREAD_START, "tftp_start");
> - ret = netboot_common(TFTPGET, cmdtp, argc, argv);
> - bootstage_mark_name(BOOTSTAGE_KERNELREAD_STOP, "tftp_done");
> - return ret;
> -}
> -
> #if IS_ENABLED(CONFIG_IPV6)
> U_BOOT_CMD(
> - tftpboot, 4, 1, do_tftpb,
> + tftpboot, 4, 1, do_lwip_tftp,
It looks like LWIP doesn't support TFTP with IPv6 addressing. Perhaps
we need to fall back onto the existing TFTP implementation until LWIP
supports it?
Note, that currently, IPv6 TFTP is enabled using the "-ipv6" argument.
The intention is that netboot_common() sees the argument and sets the
"use_ip6" variable. It looks like the new implementation in
do_lwip_tftp() doesn't re-use the argument parsing in netboot_common()
and that it doesn't handle the addition of the "-ipv6" flag.
I support the addition of LWIP, but I'm concerned about how abrupt
changes like this one will be for existing users. The underlying stack
will change, with no easy way for the user to revert to the previous
stack. Has there been any discussion about preserving the existing
functionality, with an option to enable/disable LWIP stack?This would
give the community time to transition/validate LWIP before deprecating
the old u-boot networking stack.
> "boot image via network using TFTP protocol\n"
> "To use IPv6 add -ipv6 parameter or use IPv6 hostIPaddr framed "
> "with [] brackets",
> @@ -60,7 +51,7 @@ U_BOOT_CMD(
> );
> #else
> U_BOOT_CMD(
> - tftpboot, 3, 1, do_tftpb,
> + tftpboot, 3, 1, do_lwip_tftp,
> "load file via network using TFTP protocol",
> "[loadAddress] [[hostIPaddr:]bootfilename]"
> );
> @@ -139,7 +130,7 @@ U_BOOT_CMD(dhcp6, 3, 1, do_dhcp6,
> static int do_dhcp(struct cmd_tbl *cmdtp, int flag, int argc,
> char *const argv[])
> {
> - return netboot_common(DHCP, cmdtp, argc, argv);
> + return do_lwip_dhcp();
> }
>
> U_BOOT_CMD(
> @@ -196,13 +187,11 @@ U_BOOT_CMD(
> #endif
>
> #if defined(CONFIG_CMD_WGET)
> -static int do_wget(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
> -{
> - return netboot_common(WGET, cmdtp, argc, argv);
> -}
> +int do_lwip_wget(struct cmd_tbl *cmdtp, int flag, int argc,
> + char *const argv[]);
>
> U_BOOT_CMD(
> - wget, 3, 1, do_wget,
> + wget, 3, 1, do_lwip_wget,
> "boot image via network using HTTP protocol",
> "[loadAddress] [[hostIPaddr:]path and image name]"
> );
> @@ -456,28 +445,8 @@ static int netboot_common(enum proto_t proto, struct cmd_tbl *cmdtp, int argc,
> }
>
> #if defined(CONFIG_CMD_PING)
> -static int do_ping(struct cmd_tbl *cmdtp, int flag, int argc,
> - char *const argv[])
> -{
> - if (argc < 2)
> - return CMD_RET_USAGE;
> -
> - net_ping_ip = string_to_ip(argv[1]);
> - if (net_ping_ip.s_addr == 0)
> - return CMD_RET_USAGE;
> -
> - if (net_loop(PING) < 0) {
> - printf("ping failed; host %s is not alive\n", argv[1]);
> - return CMD_RET_FAILURE;
> - }
> -
> - printf("host %s is alive\n", argv[1]);
> -
> - return CMD_RET_SUCCESS;
> -}
> -
> U_BOOT_CMD(
> - ping, 2, 1, do_ping,
> + ping, 2, 1, do_lwip_ping,
> "send ICMP ECHO_REQUEST to network host",
> "pingAddress"
> );
> @@ -601,45 +570,8 @@ U_BOOT_CMD(
> #endif
>
> #if defined(CONFIG_CMD_DNS)
> -int do_dns(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
> -{
> - if (argc == 1)
> - return CMD_RET_USAGE;
> -
> - /*
> - * We should check for a valid hostname:
> - * - Each label must be between 1 and 63 characters long
> - * - the entire hostname has a maximum of 255 characters
> - * - only the ASCII letters 'a' through 'z' (case-insensitive),
> - * the digits '0' through '9', and the hyphen
> - * - cannot begin or end with a hyphen
> - * - no other symbols, punctuation characters, or blank spaces are
> - * permitted
> - * but hey - this is a minimalist implmentation, so only check length
> - * and let the name server deal with things.
> - */
> - if (strlen(argv[1]) >= 255) {
> - printf("dns error: hostname too long\n");
> - return CMD_RET_FAILURE;
> - }
> -
> - net_dns_resolve = argv[1];
> -
> - if (argc == 3)
> - net_dns_env_var = argv[2];
> - else
> - net_dns_env_var = NULL;
> -
> - if (net_loop(DNS) < 0) {
> - printf("dns lookup of %s failed, check setup\n", argv[1]);
> - return CMD_RET_FAILURE;
> - }
> -
> - return CMD_RET_SUCCESS;
> -}
> -
> U_BOOT_CMD(
> - dns, 3, 1, do_dns,
> + dns, 3, 1, do_lwip_dns,
> "lookup the IP of a hostname",
> "hostname [envvar]"
> );
> diff --git a/cmd/pxe.c b/cmd/pxe.c
> index 677142520b..d44df428d2 100644
> --- a/cmd/pxe.c
> +++ b/cmd/pxe.c
> @@ -8,6 +8,7 @@
> #include <command.h>
> #include <fs.h>
> #include <net.h>
> +#include <net/lwip.h>
> #include <net6.h>
> #include <malloc.h>
>
> @@ -29,21 +30,19 @@ const char *pxe_default_paths[] = {
> static int do_get_tftp(struct pxe_context *ctx, const char *file_path,
> char *file_addr, ulong *sizep)
> {
> - char *tftp_argv[] = {"tftp", NULL, NULL, NULL};
> + ulong addr;
> + char *end;
> int ret;
> - int num_args;
>
> - tftp_argv[1] = file_addr;
> - tftp_argv[2] = (void *)file_path;
> + addr = hextoul(file_addr, &end);
> +
> if (ctx->use_ipv6) {
> - tftp_argv[3] = USE_IP6_CMD_PARAM;
> - num_args = 4;
> - } else {
> - num_args = 3;
> + /* @todo: check and fix me, here */
Again, looks like LWIP doesn't support IPv6 addressing, we may want to
fall back on existing TFTP implementation here.
> }
>
> - if (do_tftpb(ctx->cmdtp, 0, num_args, tftp_argv))
> - return -ENOENT;
> + ret = ulwip_tftp(addr, file_path);
> + if (ret)
> + return log_msg_ret("tftp", ret);
>
> ret = pxe_get_file_size(sizep);
> if (ret)
> diff --git a/include/net.h b/include/net.h
> index e254df7d7f..de7baeb121 100644
> --- a/include/net.h
> +++ b/include/net.h
> @@ -54,8 +54,10 @@ struct in_addr {
> __be32 s_addr;
> };
>
> +int do_lwip_dhcp(void);
> +
> /**
> - * do_tftpb - Run the tftpboot command
> + * do_lwip_tftp - Run the tftpboot command
> *
> * @cmdtp: Command information for tftpboot
> * @flag: Command flags (CMD_FLAG_...)
> @@ -63,7 +65,7 @@ struct in_addr {
> * @argv: List of arguments
> * Return: result (see enum command_ret_t)
> */
> -int do_tftpb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
> +int do_lwip_tftp(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
>
> /**
> * dhcp_run() - Run DHCP on the current ethernet device
> @@ -514,7 +516,7 @@ extern int net_restart_wrap; /* Tried all network devices */
> enum proto_t {
> BOOTP, RARP, ARP, TFTPGET, DHCP, DHCP6, PING, PING6, DNS, NFS, CDP,
> NETCONS, SNTP, TFTPSRV, TFTPPUT, LINKLOCAL, FASTBOOT_UDP, FASTBOOT_TCP,
> - WOL, UDP, NCSI, WGET, RS
> + WOL, UDP, NCSI, WGET, RS, LWIP
> };
>
> extern char net_boot_file_name[1024];/* Boot File name */
> diff --git a/include/net/ulwip.h b/include/net/ulwip.h
> new file mode 100644
> index 0000000000..8eac7aa130
> --- /dev/null
> +++ b/include/net/ulwip.h
> @@ -0,0 +1,64 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +/**
> + * ulwip_init() - initialize lwIP network stack
> + *
> + * @return 0 if success, !0 if error
> + */
> +int ulwip_init(void);
> +
> +/**
> + * ulwip_enabled() - check if lwIP network stack was initialized
> + *
> + * @return 1 lwip initialized, 0 if not yet initialized
> + */
> +int ulwip_enabled(void);
> +
> +/**
> + * ulwip_in_loop() - lwIP controls packet net loop
> + *
> + * @return 1 lwIP owns packet loop, 0 lwip does not own packet loop
> + */
> +int ulwip_in_loop(void);
> +
> +/**
> + * ulwip_loop_set() - make loop to be used by lwIP
> + *
> + * Function is used to make lwIP control network pool.
> + *
> + * @loop: 1. Rx packets go to lwIP 2. Rx packets go to the original stack.
> + */
> +void ulwip_loop_set(int loop);
> +
> +/**
> + * ulwip_exit() - exit from lwIP with a return code
> + *
> + * Exit from lwIP application back to the U-Boot with specific error code.
> + *
> + * @err: Error code to return
> + */
> +void ulwip_exit(int err);
> +
> +/**
> + * ulwip_poll() - polling function to feed lwIP with ethernet packet
> + *
> + * Function takes network packet and passes it to lwIP network stack
> + */
> +void ulwip_poll(void);
> +
> +/**
> + * ulwip_app_get_err() - return error code from lwIP application
> + *
> + * @return error code
> + */
> +int ulwip_app_get_err(void);
> +
> +/**
> + * ulwip_loop() - enter to packet polling loop
> + *
> + * When lwIP application did it's initialization stage, then it needs to enter
> + * to packet polling loop to grab rx packets.
> + *
> + * Returns: 0 if success, !0 if error
> + */
> +int ulwip_loop(void);
More information about the U-Boot
mailing list