[PATCH] arm: dts: k3-am625-beagleplay: Fix boot

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka at siemens.com>

Since commit [1] A53 u-boot proper is broken. This is because nodes
marked as 'bootph-pre-ram' are not available at u-boot proper before
relocation.

To fix this we mark all nodes as 'bootph-all'.

[1] 9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")

Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---

This may overshoot, but at least the board boots again. Could it be that 
[1] broke even more boards?

 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 70 ++++++++++----------
 arch/arm/dts/k3-am625-r5-beagleplay.dts      | 12 ++--
 2 files changed, 41 insertions(+), 41 deletions(-)

diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index f8c04e8a300..d6c6baa5518 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -14,143 +14,143 @@
 	};
  	memory at 80000000 {
-		bootph-pre-ram;
+		bootph-all;
 	};
  	/* Keep the LEDs on by default to indicate life */
 	leds {
-		bootph-pre-ram;
+		bootph-all;
 		led-0 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
  		led-1 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
  		led-2 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
  		led-3 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
  		led-4 {
 			default-state = "on";
-			bootph-pre-ram;
+			bootph-all;
 		};
 	};
 };
  &cbass_main {
-	bootph-pre-ram;
+	bootph-all;
 };
  &main_timer0 {
 	clock-frequency = <25000000>;
-	bootph-pre-ram;
+	bootph-all;
 };
  &dmss {
-	bootph-pre-ram;
+	bootph-all;
 };
  &secure_proxy_main {
-	bootph-pre-ram;
+	bootph-all;
 };
  &dmsc {
-	bootph-pre-ram;
+	bootph-all;
 };
  &k3_pds {
-	bootph-pre-ram;
+	bootph-all;
 };
  &k3_clks {
-	bootph-pre-ram;
+	bootph-all;
 };
  &k3_reset {
-	bootph-pre-ram;
+	bootph-all;
 };
  &dmsc {
-	bootph-pre-ram;
+	bootph-all;
 	k3_sysreset: sysreset-controller {
 		compatible = "ti,sci-sysreset";
-		bootph-pre-ram;
+		bootph-all;
 	};
 };
  &wkup_conf {
-	bootph-pre-ram;
+	bootph-all;
 };
  &chipid {
-	bootph-pre-ram;
+	bootph-all;
 };
  &main_pmx0 {
-	bootph-pre-ram;
+	bootph-all;
 };
  &main_uart0 {
-	bootph-pre-ram;
+	bootph-all;
 };
  &console_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
  &cbass_mcu {
-	bootph-pre-ram;
+	bootph-all;
 };
  &cbass_wakeup {
-	bootph-pre-ram;
+	bootph-all;
 };
  &mcu_pmx0 {
-	bootph-pre-ram;
+	bootph-all;
 };
  &main_i2c0 {
-	bootph-pre-ram;
+	bootph-all;
 };
  &local_i2c_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
  &gpio0_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
  &main_gpio0 {
-	bootph-pre-ram;
+	bootph-all;
 };
  &main_gpio1 {
-	bootph-pre-ram;
+	bootph-all;
 };
  &sdhci0 {
 	/* EMMC */
-	bootph-pre-ram;
+	bootph-all;
 };
  &emmc_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
  &sd_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 	/* Force to use SDCD card detect pin */
 	pinctrl-single,pins = <
 		AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
@@ -164,11 +164,11 @@
 };
  &tps65219 {
-	bootph-pre-ram;
+	bootph-all;
 };
  &sdhci1 {
-	bootph-pre-ram;
+	bootph-all;
 };
  #ifdef CONFIG_TARGET_AM625_A53_EVM
diff --git a/arch/arm/dts/k3-am625-r5-beagleplay.dts b/arch/arm/dts/k3-am625-r5-beagleplay.dts
index 9c9d0570592..ac5461a32c0 100644
--- a/arch/arm/dts/k3-am625-r5-beagleplay.dts
+++ b/arch/arm/dts/k3-am625-r5-beagleplay.dts
@@ -31,7 +31,7 @@
 		ti,sci = <&dmsc>;
 		ti,sci-proc-id = <32>;
 		ti,sci-host-id = <10>;
-		bootph-pre-ram;
+		bootph-all;
 	};
  	dm_tifs: dm-tifs {
@@ -41,7 +41,7 @@
 		mbox-names = "rx", "tx";
 		mboxes= <&secure_proxy_main 22>,
 			<&secure_proxy_main 23>;
-		bootph-pre-ram;
+		bootph-all;
 	};
 };
 @@ -55,11 +55,11 @@
 };
  &mcu_esm {
-	bootph-pre-ram;
+	bootph-all;
 };
  &secure_proxy_sa3 {
-	bootph-pre-ram;
+	bootph-all;
 	/* We require this for boot handshake */
 	status = "okay";
 };
@@ -69,12 +69,12 @@
 		compatible = "ti,am654-system-controller";
 		mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>, <&secure_proxy_sa3 0>;
 		mbox-names = "tx", "rx", "boot_notify";
-		bootph-pre-ram;
+		bootph-all;
 	};
 };
  &main_esm {
-	bootph-pre-ram;
+	bootph-all;
 };
  &main_pktdma {
-- 
2.35.3