[PATCH v1 1/2] spi: add support for Amlogic A1 SPI Flash Controller
Igor Prusov
ivprusov at salutedevices.com
Tue Oct 3 22:29:07 CEST 2023
From: Igor Prusov <IVPrusov at sberdevices.ru>
Add A1 SPIFC driver from Linux. Slightly modified to use u-boot driver
framework and accommodate to lack of ioread32_rep/iowrite32_rep.
Based on Linux version 6.6-rc4
Signed-off-by: Igor Prusov <IVPrusov at sberdevices.ru>
Signed-off-by: Martin Kurbanov <mmkurbanov at sberdevices.ru>
---
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1 +
drivers/spi/meson_spifc_a1.c | 384 +++++++++++++++++++++++++++++++++++
3 files changed, 393 insertions(+)
create mode 100644 drivers/spi/meson_spifc_a1.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 854b8b88da..dedb366370 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -251,6 +251,14 @@ config MICROCHIP_COREQSPI
Enable the QSPI driver for Microchip FPGA QSPI controllers.
This driver can be used on Polarfire SoC.
+config MESON_SPIFC_A1
+ bool "Amlogic Meson A1 SPI Flash Controller driver"
+ depends on ARCH_MESON
+ help
+ Enable the Amlogic A1 SPI Flash Controller (SPIFC) driver.
+ This driver can be used to access the SPI NOR/NAND flash chips on
+ Amlogic A1 SoC.
+
config MPC8XX_SPI
bool "MPC8XX SPI Driver"
depends on MPC8xx
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index c27b3327c3..14bdb97f18 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_ICH_SPI) += ich.o
obj-$(CONFIG_IPROC_QSPI) += iproc_qspi.o
obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o
+obj-$(CONFIG_MESON_SPIFC_A1) += meson_spifc_a1.o
obj-$(CONFIG_MICROCHIP_COREQSPI) += microchip_coreqspi.o
obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
diff --git a/drivers/spi/meson_spifc_a1.c b/drivers/spi/meson_spifc_a1.c
new file mode 100644
index 0000000000..4b840c4634
--- /dev/null
+++ b/drivers/spi/meson_spifc_a1.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Amlogic A1 SPI flash controller (SPIFC)
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ *
+ * Author: Martin Kurbanov <mmkurbanov at sberdevices.ru>
+ *
+ * Ported to u-boot:
+ * Author: Igor Prusov <ivprusov at sberdevices.ru>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <spi.h>
+#include <spi-mem.h>
+#include <asm/io.h>
+#include <linux/log2.h>
+#include <linux/iopoll.h>
+#include <linux/bitfield.h>
+
+#define SPIFC_A1_AHB_CTRL_REG 0x0
+#define SPIFC_A1_AHB_BUS_EN BIT(31)
+
+#define SPIFC_A1_USER_CTRL0_REG 0x200
+#define SPIFC_A1_USER_REQUEST_ENABLE BIT(31)
+#define SPIFC_A1_USER_REQUEST_FINISH BIT(30)
+#define SPIFC_A1_USER_DATA_UPDATED BIT(0)
+
+#define SPIFC_A1_USER_CTRL1_REG 0x204
+#define SPIFC_A1_USER_CMD_ENABLE BIT(30)
+#define SPIFC_A1_USER_CMD_MODE GENMASK(29, 28)
+#define SPIFC_A1_USER_CMD_CODE GENMASK(27, 20)
+#define SPIFC_A1_USER_ADDR_ENABLE BIT(19)
+#define SPIFC_A1_USER_ADDR_MODE GENMASK(18, 17)
+#define SPIFC_A1_USER_ADDR_BYTES GENMASK(16, 15)
+#define SPIFC_A1_USER_DOUT_ENABLE BIT(14)
+#define SPIFC_A1_USER_DOUT_MODE GENMASK(11, 10)
+#define SPIFC_A1_USER_DOUT_BYTES GENMASK(9, 0)
+
+#define SPIFC_A1_USER_CTRL2_REG 0x208
+#define SPIFC_A1_USER_DUMMY_ENABLE BIT(31)
+#define SPIFC_A1_USER_DUMMY_MODE GENMASK(30, 29)
+#define SPIFC_A1_USER_DUMMY_CLK_SYCLES GENMASK(28, 23)
+
+#define SPIFC_A1_USER_CTRL3_REG 0x20c
+#define SPIFC_A1_USER_DIN_ENABLE BIT(31)
+#define SPIFC_A1_USER_DIN_MODE GENMASK(28, 27)
+#define SPIFC_A1_USER_DIN_BYTES GENMASK(25, 16)
+
+#define SPIFC_A1_USER_ADDR_REG 0x210
+
+#define SPIFC_A1_AHB_REQ_CTRL_REG 0x214
+#define SPIFC_A1_AHB_REQ_ENABLE BIT(31)
+
+#define SPIFC_A1_ACTIMING0_REG (0x0088 << 2)
+#define SPIFC_A1_TSLCH GENMASK(31, 30)
+#define SPIFC_A1_TCLSH GENMASK(29, 28)
+#define SPIFC_A1_TSHWL GENMASK(20, 16)
+#define SPIFC_A1_TSHSL2 GENMASK(15, 12)
+#define SPIFC_A1_TSHSL1 GENMASK(11, 8)
+#define SPIFC_A1_TWHSL GENMASK(7, 0)
+
+#define SPIFC_A1_DBUF_CTRL_REG 0x240
+#define SPIFC_A1_DBUF_DIR BIT(31)
+#define SPIFC_A1_DBUF_AUTO_UPDATE_ADDR BIT(30)
+#define SPIFC_A1_DBUF_ADDR GENMASK(7, 0)
+
+#define SPIFC_A1_DBUF_DATA_REG 0x244
+
+#define SPIFC_A1_USER_DBUF_ADDR_REG 0x248
+
+#define SPIFC_A1_BUFFER_SIZE 512U
+
+#define SPIFC_A1_MAX_HZ 200000000
+#define SPIFC_A1_MIN_HZ 1000000
+
+#define SPIFC_A1_USER_CMD(op) ( \
+ SPIFC_A1_USER_CMD_ENABLE | \
+ FIELD_PREP(SPIFC_A1_USER_CMD_CODE, (op)->cmd.opcode) | \
+ FIELD_PREP(SPIFC_A1_USER_CMD_MODE, ilog2((op)->cmd.buswidth)))
+
+#define SPIFC_A1_USER_ADDR(op) ( \
+ SPIFC_A1_USER_ADDR_ENABLE | \
+ FIELD_PREP(SPIFC_A1_USER_ADDR_MODE, ilog2((op)->addr.buswidth)) | \
+ FIELD_PREP(SPIFC_A1_USER_ADDR_BYTES, (op)->addr.nbytes - 1))
+
+#define SPIFC_A1_USER_DUMMY(op) ( \
+ SPIFC_A1_USER_DUMMY_ENABLE | \
+ FIELD_PREP(SPIFC_A1_USER_DUMMY_MODE, ilog2((op)->dummy.buswidth)) | \
+ FIELD_PREP(SPIFC_A1_USER_DUMMY_CLK_SYCLES, (op)->dummy.nbytes << 3))
+
+#define SPIFC_A1_TSLCH_VAL FIELD_PREP(SPIFC_A1_TSLCH, 1)
+#define SPIFC_A1_TCLSH_VAL FIELD_PREP(SPIFC_A1_TCLSH, 1)
+#define SPIFC_A1_TSHWL_VAL FIELD_PREP(SPIFC_A1_TSHWL, 7)
+#define SPIFC_A1_TSHSL2_VAL FIELD_PREP(SPIFC_A1_TSHSL2, 7)
+#define SPIFC_A1_TSHSL1_VAL FIELD_PREP(SPIFC_A1_TSHSL1, 7)
+#define SPIFC_A1_TWHSL_VAL FIELD_PREP(SPIFC_A1_TWHSL, 2)
+#define SPIFC_A1_ACTIMING0_VAL (SPIFC_A1_TSLCH_VAL | SPIFC_A1_TCLSH_VAL | \
+ SPIFC_A1_TSHWL_VAL | SPIFC_A1_TSHSL2_VAL | \
+ SPIFC_A1_TSHSL1_VAL | SPIFC_A1_TWHSL_VAL)
+
+struct amlogic_spifc_a1 {
+ struct spi_controller *ctrl;
+ struct clk clk;
+ struct device *dev;
+ void __iomem *base;
+ u32 curr_speed_hz;
+};
+
+static int amlogic_spifc_a1_request(struct amlogic_spifc_a1 *spifc, bool read)
+{
+ u32 mask = SPIFC_A1_USER_REQUEST_FINISH |
+ (read ? SPIFC_A1_USER_DATA_UPDATED : 0);
+ u32 val;
+
+ writel(SPIFC_A1_USER_REQUEST_ENABLE,
+ spifc->base + SPIFC_A1_USER_CTRL0_REG);
+
+ return readl_poll_timeout(spifc->base + SPIFC_A1_USER_CTRL0_REG,
+ val, (val & mask) == mask,
+ 200 * 1000);
+}
+
+static void amlogic_spifc_a1_drain_buffer(struct amlogic_spifc_a1 *spifc,
+ char *buf, u32 len)
+{
+ u32 data;
+ const u32 count = len / sizeof(data);
+ const u32 pad = len % sizeof(data);
+
+ writel(SPIFC_A1_DBUF_AUTO_UPDATE_ADDR,
+ spifc->base + SPIFC_A1_DBUF_CTRL_REG);
+ readsl(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count);
+
+ if (pad) {
+ data = readl(spifc->base + SPIFC_A1_DBUF_DATA_REG);
+ memcpy(buf + len - pad, &data, pad);
+ }
+}
+
+static void amlogic_spifc_a1_fill_buffer(struct amlogic_spifc_a1 *spifc,
+ const char *buf, u32 len)
+{
+ u32 data;
+ const u32 count = len / sizeof(data);
+ const u32 pad = len % sizeof(data);
+
+ writel(SPIFC_A1_DBUF_DIR | SPIFC_A1_DBUF_AUTO_UPDATE_ADDR,
+ spifc->base + SPIFC_A1_DBUF_CTRL_REG);
+ writesl(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count);
+
+ if (pad) {
+ memcpy(&data, buf + len - pad, pad);
+ writel(data, spifc->base + SPIFC_A1_DBUF_DATA_REG);
+ }
+}
+
+static void amlogic_spifc_a1_user_init(struct amlogic_spifc_a1 *spifc)
+{
+ writel(0, spifc->base + SPIFC_A1_USER_CTRL0_REG);
+ writel(0, spifc->base + SPIFC_A1_USER_CTRL1_REG);
+ writel(0, spifc->base + SPIFC_A1_USER_CTRL2_REG);
+ writel(0, spifc->base + SPIFC_A1_USER_CTRL3_REG);
+}
+
+static void amlogic_spifc_a1_set_cmd(struct amlogic_spifc_a1 *spifc,
+ u32 cmd_cfg)
+{
+ u32 val;
+
+ val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
+ val &= ~(SPIFC_A1_USER_CMD_MODE | SPIFC_A1_USER_CMD_CODE);
+ val |= cmd_cfg;
+ writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
+}
+
+static void amlogic_spifc_a1_set_addr(struct amlogic_spifc_a1 *spifc, u32 addr,
+ u32 addr_cfg)
+{
+ u32 val;
+
+ writel(addr, spifc->base + SPIFC_A1_USER_ADDR_REG);
+
+ val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
+ val &= ~(SPIFC_A1_USER_ADDR_MODE | SPIFC_A1_USER_ADDR_BYTES);
+ val |= addr_cfg;
+ writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
+}
+
+static void amlogic_spifc_a1_set_dummy(struct amlogic_spifc_a1 *spifc,
+ u32 dummy_cfg)
+{
+ u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL2_REG);
+
+ val &= ~(SPIFC_A1_USER_DUMMY_MODE | SPIFC_A1_USER_DUMMY_CLK_SYCLES);
+ val |= dummy_cfg;
+ writel(val, spifc->base + SPIFC_A1_USER_CTRL2_REG);
+}
+
+static int amlogic_spifc_a1_read(struct amlogic_spifc_a1 *spifc, void *buf,
+ u32 size, u32 mode)
+{
+ u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL3_REG);
+ int ret;
+
+ val &= ~(SPIFC_A1_USER_DIN_MODE | SPIFC_A1_USER_DIN_BYTES);
+ val |= SPIFC_A1_USER_DIN_ENABLE;
+ val |= FIELD_PREP(SPIFC_A1_USER_DIN_MODE, mode);
+ val |= FIELD_PREP(SPIFC_A1_USER_DIN_BYTES, size);
+ writel(val, spifc->base + SPIFC_A1_USER_CTRL3_REG);
+
+ ret = amlogic_spifc_a1_request(spifc, true);
+ if (!ret)
+ amlogic_spifc_a1_drain_buffer(spifc, buf, size);
+
+ return ret;
+}
+
+static int amlogic_spifc_a1_write(struct amlogic_spifc_a1 *spifc,
+ const void *buf, u32 size, u32 mode)
+{
+ u32 val;
+
+ amlogic_spifc_a1_fill_buffer(spifc, buf, size);
+
+ val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
+ val &= ~(SPIFC_A1_USER_DOUT_MODE | SPIFC_A1_USER_DOUT_BYTES);
+ val |= FIELD_PREP(SPIFC_A1_USER_DOUT_MODE, mode);
+ val |= FIELD_PREP(SPIFC_A1_USER_DOUT_BYTES, size);
+ val |= SPIFC_A1_USER_DOUT_ENABLE;
+ writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
+
+ return amlogic_spifc_a1_request(spifc, false);
+}
+
+static int amlogic_spifc_a1_set_freq(struct amlogic_spifc_a1 *spifc, u32 freq)
+{
+ int ret;
+
+ if (freq == spifc->curr_speed_hz)
+ return 0;
+
+ ret = clk_set_rate(&spifc->clk, freq);
+ if (ret)
+ return ret;
+
+ spifc->curr_speed_hz = freq;
+ return 0;
+}
+
+static int amlogic_spifc_a1_exec_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ struct amlogic_spifc_a1 *spifc = dev_get_priv(slave->dev->parent);
+ size_t data_size = op->data.nbytes;
+ int ret;
+
+ ret = amlogic_spifc_a1_set_freq(spifc, slave->max_hz);
+ if (ret)
+ return ret;
+
+ amlogic_spifc_a1_user_init(spifc);
+ amlogic_spifc_a1_set_cmd(spifc, SPIFC_A1_USER_CMD(op));
+
+ if (op->addr.nbytes)
+ amlogic_spifc_a1_set_addr(spifc, op->addr.val,
+ SPIFC_A1_USER_ADDR(op));
+
+ if (op->dummy.nbytes)
+ amlogic_spifc_a1_set_dummy(spifc, SPIFC_A1_USER_DUMMY(op));
+
+ if (data_size) {
+ u32 mode = ilog2(op->data.buswidth);
+
+ writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);
+
+ if (op->data.dir == SPI_MEM_DATA_IN)
+ ret = amlogic_spifc_a1_read(spifc, op->data.buf.in,
+ data_size, mode);
+ else
+ ret = amlogic_spifc_a1_write(spifc, op->data.buf.out,
+ data_size, mode);
+ } else {
+ ret = amlogic_spifc_a1_request(spifc, false);
+ }
+
+ return ret;
+}
+
+static int amlogic_spifc_a1_adjust_op_size(struct spi_slave *slave,
+ struct spi_mem_op *op)
+{
+ op->data.nbytes = min(op->data.nbytes, SPIFC_A1_BUFFER_SIZE);
+ return 0;
+}
+
+static void amlogic_spifc_a1_hw_init(struct amlogic_spifc_a1 *spifc)
+{
+ u32 regv;
+
+ regv = readl(spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG);
+ regv &= ~(SPIFC_A1_AHB_REQ_ENABLE);
+ writel(regv, spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG);
+
+ regv = readl(spifc->base + SPIFC_A1_AHB_CTRL_REG);
+ regv &= ~(SPIFC_A1_AHB_BUS_EN);
+ writel(regv, spifc->base + SPIFC_A1_AHB_CTRL_REG);
+
+ writel(SPIFC_A1_ACTIMING0_VAL, spifc->base + SPIFC_A1_ACTIMING0_REG);
+
+ writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);
+}
+
+static const struct spi_controller_mem_ops amlogic_spifc_a1_mem_ops = {
+ .exec_op = amlogic_spifc_a1_exec_op,
+ .adjust_op_size = amlogic_spifc_a1_adjust_op_size,
+};
+
+static int amlogic_spifc_a1_probe(struct udevice *dev)
+{
+ struct amlogic_spifc_a1 *spifc = dev_get_priv(dev);
+ int ret;
+ struct udevice *bus = dev;
+
+ spifc->base = (void *)dev_read_addr(dev);
+
+ ret = clk_get_by_index(bus, 0, &spifc->clk);
+ if (ret) {
+ pr_err("can't get clk spifc_gate!\n");
+ return ret;
+ }
+
+ ret = clk_enable(&spifc->clk);
+ if (ret) {
+ pr_err("enable clk fail\n");
+ return ret;
+ }
+
+ amlogic_spifc_a1_hw_init(spifc);
+
+ return 0;
+}
+
+static int amlogic_spifc_a1_remove(struct udevice *dev)
+{
+ struct amlogic_spifc_a1 *spifc = dev_get_priv(dev);
+
+ clk_free(&spifc->clk);
+
+ return 0;
+}
+
+static const struct udevice_id meson_spifc_ids[] = {
+ { .compatible = "amlogic,a1-spifc", },
+ { }
+};
+
+int amlogic_spifc_a1_set_speed(struct udevice *bus, uint hz)
+{
+ return 0;
+}
+
+int amlogic_spifc_a1_set_mode(struct udevice *bus, uint mode)
+{
+ return 0;
+}
+
+static const struct dm_spi_ops amlogic_spifc_a1_ops = {
+ .mem_ops = &amlogic_spifc_a1_mem_ops,
+ .set_speed = amlogic_spifc_a1_set_speed,
+ .set_mode = amlogic_spifc_a1_set_mode,
+};
+
+U_BOOT_DRIVER(meson_spifc_a1) = {
+ .name = "meson_spifc_a1",
+ .id = UCLASS_SPI,
+ .of_match = meson_spifc_ids,
+ .ops = &amlogic_spifc_a1_ops,
+ .probe = amlogic_spifc_a1_probe,
+ .remove = amlogic_spifc_a1_remove,
+ .priv_auto = sizeof(struct amlogic_spifc_a1),
+};
--
2.34.1
More information about the U-Boot
mailing list