[PATCH] arm: mach-imx: Makefile: Extend u-boot-nand.imx padding

[Hiago De Franco]

From: Hiago De Franco <hiago.franco at toradex.com>

Extend the padding process of u-boot-nand.imx target by adding 10k bytes
of zeros to the end of the binary using the 'dd' command.

The existing padding method did not generate a functional binary,
as discussed in more detail in this thread [1]. Instead, we adopt the
end-padding calculation method documented in 'board/doc/colibri_imx7.rst'
as a reference, which is relevant for iMX7 with NAND storage.

Adding 10k bytes of zeros provides an approximate value that makes the
proper padding for these NAND devices.

[1] https://lore.kernel.org/all/CAC4tdFUqffQzRQFv5AGe_xtbFy1agr2SEpn_FzEdexhwjdryyw@mail.gmail.com/

Signed-off-by: Hiago De Franco <hiago.franco at toradex.com>
---
 arch/arm/mach-imx/Makefile | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index aebfa6517b..6904cf3880 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -142,7 +142,9 @@ u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
 	$(call if_changed,mkimage)
 
 quiet_cmd_u-boot-nand_imx = GEN     $@
-cmd_u-boot-nand_imx = (dd bs=1024 count=1 if=/dev/zero 2>/dev/null) | cat - $< > $@
+cmd_u-boot-nand_imx = (dd bs=1024 count=1 if=/dev/zero 2>/dev/null) | cat - $< > $@.zero-padded ; \
+		      (dd bs=10k count=1 if=/dev/zero 2>/dev/null) | cat $@.zero-padded - > $@ ; \
+		      rm -f $@.zero-padded
 
 u-boot-nand.imx: u-boot.imx FORCE
 	$(call if_changed,u-boot-nand_imx)
-- 
2.40.1