[PATCH 1/2] arm: dts: imx93-11x11-evk: add bootph-some-ram property
Sébastien Szymanski
sebastien.szymanski at armadeus.com
Wed Oct 4 11:08:09 CEST 2023
i.MX93 11x11 EVK fails to boot:
U-Boot SPL 2023.10-00558-g65b9b3462bec-dirty (Oct 03 2023 - 17:40:10 +0200)
SOC: 0xa0009300
LC: 0x40010
M33 prepare ok
Normal Boot
Trying to boot from BOOTROM
Boot Stage: Primary boot
image offset 0x8000, pagesize 0x200, ivt offset 0x0
Load image from 0x44400 by ROM_API
NOTICE: BL31: v2.8(release):android-13.0.0_2.0.0-0-ge4b2dbfa52f5
NOTICE: BL31: Built : 17:52:46, Sep 28 2023
That's because commit 9e644284ab81 ("dm: core: Report
bootph-pre-ram/sram node as pre-reloc after relocation"):
"[This] changes behavior of what nodes are bound in the U-Boot
proper pre-relocation phase. Change to bootph-all or add
bootph-some-ram prop to restore prior behavior."
Fix this by adding bootph-some-ram prop as suggested by the commit
above.
Fixes: 9e644284ab81 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski at armadeus.com>
---
arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
index 5b465e2dbd9d..2d9c9618ce2d 100644
--- a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
@@ -8,6 +8,7 @@
compatible = "wdt-reboot";
wdt = <&wdog3>;
bootph-pre-ram;
+ bootph-some-ram;
};
firmware {
@@ -30,19 +31,23 @@
&aips2 {
bootph-pre-ram;
+ bootph-some-ram;
};
&aips3 {
bootph-pre-ram;
+ bootph-some-ram;
};
&iomuxc {
bootph-pre-ram;
+ bootph-some-ram;
};
®_usdhc2_vmmc {
u-boot,off-on-delay-us = <20000>;
bootph-pre-ram;
+ bootph-some-ram;
};
&pinctrl_reg_usdhc2_vmmc {
@@ -51,59 +56,73 @@
&pinctrl_uart1 {
bootph-pre-ram;
+ bootph-some-ram;
};
&pinctrl_usdhc2_gpio {
bootph-pre-ram;
+ bootph-some-ram;
};
&pinctrl_usdhc2 {
bootph-pre-ram;
+ bootph-some-ram;
};
&gpio1 {
bootph-pre-ram;
+ bootph-some-ram;
};
&gpio2 {
bootph-pre-ram;
+ bootph-some-ram;
};
&gpio3 {
bootph-pre-ram;
+ bootph-some-ram;
};
&gpio4 {
bootph-pre-ram;
+ bootph-some-ram;
};
&lpuart1 {
bootph-pre-ram;
+ bootph-some-ram;
};
&usdhc1 {
bootph-pre-ram;
+ bootph-some-ram;
};
&usdhc2 {
bootph-pre-ram;
+ bootph-some-ram;
fsl,signal-voltage-switch-extra-delay-ms = <8>;
};
&lpi2c2 {
bootph-pre-ram;
+ bootph-some-ram;
};
&{/soc at 0/bus at 44000000/i2c at 44350000/pmic at 25} {
bootph-pre-ram;
+ bootph-some-ram;
};
&{/soc at 0/bus at 44000000/i2c at 44350000/pmic at 25/regulators} {
bootph-pre-ram;
+ bootph-some-ram;
};
&pinctrl_lpi2c2 {
bootph-pre-ram;
+ bootph-some-ram;
};
&fec {
@@ -124,5 +143,6 @@
&s4muap {
bootph-pre-ram;
+ bootph-some-ram;
status = "okay";
};
--
2.41.0
More information about the U-Boot
mailing list