[PATCH] arm: dts: k3-am625-beagleplay: Fix boot
Nishanth Menon
nm at ti.com
Wed Oct 4 14:15:46 CEST 2023
On 22:26-20231003, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka at siemens.com>
>
> Since commit [1] A53 u-boot proper is broken. This is because nodes
> marked as 'bootph-pre-ram' are not available at u-boot proper before
> relocation.
>
> To fix this we mark all nodes as 'bootph-all'.
>
> [1] 9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")
>
> Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
> ---
>
> This may overshoot, but at least the board boots again. Could it be that
> [1] broke even more boards?
Jan: https://lore.kernel.org/all/b1c62a7d-a90e-4212-8972-9b622e147975@kernel.org/
I got boot without r5-beagleplay.dts modified. and it is in line with
the changes in linux-next commit 944adefc7f88 ("arm64: dts: ti:
k3-am625-beagleplay: Add boot phase tags marking")
>
> arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 70 ++++++++++----------
> arch/arm/dts/k3-am625-r5-beagleplay.dts | 12 ++--
> 2 files changed, 41 insertions(+), 41 deletions(-)
>
> diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> index f8c04e8a300..d6c6baa5518 100644
> --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> @@ -14,143 +14,143 @@
> };
> memory at 80000000 {
> - bootph-pre-ram;
> + bootph-all;
> };
> /* Keep the LEDs on by default to indicate life */
> leds {
> - bootph-pre-ram;
> + bootph-all;
> led-0 {
> default-state = "on";
> - bootph-pre-ram;
> + bootph-all;
> };
> led-1 {
> default-state = "on";
> - bootph-pre-ram;
> + bootph-all;
> };
> led-2 {
> default-state = "on";
> - bootph-pre-ram;
> + bootph-all;
> };
> led-3 {
> default-state = "on";
> - bootph-pre-ram;
> + bootph-all;
> };
> led-4 {
> default-state = "on";
> - bootph-pre-ram;
> + bootph-all;
> };
> };
> };
> &cbass_main {
> - bootph-pre-ram;
> + bootph-all;
> };
> &main_timer0 {
> clock-frequency = <25000000>;
> - bootph-pre-ram;
> + bootph-all;
> };
> &dmss {
> - bootph-pre-ram;
> + bootph-all;
> };
> &secure_proxy_main {
> - bootph-pre-ram;
> + bootph-all;
> };
> &dmsc {
> - bootph-pre-ram;
> + bootph-all;
> };
> &k3_pds {
> - bootph-pre-ram;
> + bootph-all;
> };
> &k3_clks {
> - bootph-pre-ram;
> + bootph-all;
> };
> &k3_reset {
> - bootph-pre-ram;
> + bootph-all;
> };
> &dmsc {
> - bootph-pre-ram;
> + bootph-all;
> k3_sysreset: sysreset-controller {
> compatible = "ti,sci-sysreset";
> - bootph-pre-ram;
> + bootph-all;
> };
> };
> &wkup_conf {
> - bootph-pre-ram;
> + bootph-all;
> };
> &chipid {
> - bootph-pre-ram;
> + bootph-all;
> };
> &main_pmx0 {
> - bootph-pre-ram;
> + bootph-all;
> };
> &main_uart0 {
> - bootph-pre-ram;
> + bootph-all;
> };
> &console_pins_default {
> - bootph-pre-ram;
> + bootph-all;
> };
> &cbass_mcu {
> - bootph-pre-ram;
> + bootph-all;
> };
> &cbass_wakeup {
> - bootph-pre-ram;
> + bootph-all;
> };
> &mcu_pmx0 {
> - bootph-pre-ram;
> + bootph-all;
> };
> &main_i2c0 {
> - bootph-pre-ram;
> + bootph-all;
> };
> &local_i2c_pins_default {
> - bootph-pre-ram;
> + bootph-all;
> };
> &gpio0_pins_default {
> - bootph-pre-ram;
> + bootph-all;
> };
> &main_gpio0 {
> - bootph-pre-ram;
> + bootph-all;
> };
> &main_gpio1 {
> - bootph-pre-ram;
> + bootph-all;
> };
> &sdhci0 {
> /* EMMC */
> - bootph-pre-ram;
> + bootph-all;
> };
> &emmc_pins_default {
> - bootph-pre-ram;
> + bootph-all;
> };
> &sd_pins_default {
> - bootph-pre-ram;
> + bootph-all;
> /* Force to use SDCD card detect pin */
> pinctrl-single,pins = <
> AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
> @@ -164,11 +164,11 @@
> };
> &tps65219 {
> - bootph-pre-ram;
> + bootph-all;
> };
> &sdhci1 {
> - bootph-pre-ram;
> + bootph-all;
> };
> #ifdef CONFIG_TARGET_AM625_A53_EVM
> diff --git a/arch/arm/dts/k3-am625-r5-beagleplay.dts b/arch/arm/dts/k3-am625-r5-beagleplay.dts
> index 9c9d0570592..ac5461a32c0 100644
> --- a/arch/arm/dts/k3-am625-r5-beagleplay.dts
> +++ b/arch/arm/dts/k3-am625-r5-beagleplay.dts
> @@ -31,7 +31,7 @@
> ti,sci = <&dmsc>;
> ti,sci-proc-id = <32>;
> ti,sci-host-id = <10>;
> - bootph-pre-ram;
> + bootph-all;
> };
> dm_tifs: dm-tifs {
> @@ -41,7 +41,7 @@
> mbox-names = "rx", "tx";
> mboxes= <&secure_proxy_main 22>,
> <&secure_proxy_main 23>;
> - bootph-pre-ram;
> + bootph-all;
> };
> };
> @@ -55,11 +55,11 @@
> };
> &mcu_esm {
> - bootph-pre-ram;
> + bootph-all;
> };
> &secure_proxy_sa3 {
> - bootph-pre-ram;
> + bootph-all;
> /* We require this for boot handshake */
> status = "okay";
> };
> @@ -69,12 +69,12 @@
> compatible = "ti,am654-system-controller";
> mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>, <&secure_proxy_sa3 0>;
> mbox-names = "tx", "rx", "boot_notify";
> - bootph-pre-ram;
> + bootph-all;
> };
> };
> &main_esm {
> - bootph-pre-ram;
> + bootph-all;
> };
> &main_pktdma {
> --
> 2.35.3
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
More information about the U-Boot
mailing list