[PATCH v2 0/8] Support USB for Meson A1

neil.armstrong at linaro.org neil.armstrong at linaro.org
Wed Oct 4 18:03:23 CEST 2023


On 03/10/2023 13:28, Alexey Romanov wrote:
> Hello!
> 
> This patchset adds USB stack support for Amlogic A1 SoC's
> series. Made reset / phy / dwc3 drivers more flexible and
> added support for A1 board.
> 
> V2:
> 
> - Made power domain for PHY optional.
> - Add missing CLKID_USB_PHY gate.
> - Drop patch with USB stack initialization in board-a1.c.
> Instead of, enable CONFIG_DM_USB_GADGET for AD401 board.
> - Support A1 in g12a_child_pre_probe/post_remove functions
> in dwc3 driver.
> 
> 
> Alexey Romanov (7):
>    dt-bindings: reset: add Meson A1 reset bindings
>    reset: add support for Amlogic A1 family
>    phy: get rid of raw hex values
>    phy: move clk enable/disable in init/exit
>    phy: support Amlogic A1 family
>    dwc3: add support for Amlogic A1 family
>    ad401: enable USB stack
> 
> Igor Prusov (1):
>    a1: clk: Add missing USB_PHY_IN and USB_PHY gates
> 
>   configs/ad401_defconfig                       |   3 +
>   drivers/clk/meson/a1.c                        |   6 +
>   drivers/phy/Kconfig                           |   2 +-
>   drivers/phy/meson-g12a-usb2.c                 | 235 ++++++++++++++++--
>   drivers/reset/reset-meson.c                   |  42 +++-
>   drivers/usb/dwc3/dwc3-meson-g12a.c            |  73 +++++-
>   .../reset/amlogic,meson-a1-reset.h            |  76 ++++++
>   7 files changed, 403 insertions(+), 34 deletions(-)
>   create mode 100644 include/dt-bindings/reset/amlogic,meson-a1-reset.h
> 

The PHY and DWC3 patches don't apply cleanly, could you rebase on top of:
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commits/u-boot-amlogic

Thanks,
Neil


More information about the U-Boot mailing list