[PATCH v4 10/16] arm: dts: Introduce j784s4 u-boot dts files

[Apurva Nandan]

On 02/10/23 19:34, Jerome Forissier wrote:
> Hello Apurva,
>
> On 10/1/23 18:55, Apurva Nandan wrote:
>> Introduce the base dts files needed for u-boot or to augment the linux
>> dtbs for use in the u-boot-spl and u-boot binaries.
>>
>> Signed-off-by: Hari Nagalla <hnagalla at ti.com>
>> [ add binman and ddr dtsi files ]
>> Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
>> Signed-off-by: Apurva Nandan <a-nandan at ti.com>
>> Signed-off-by: Dasnavis Sabiya <sabiya.d at ti.com>
>> ---
>>   arch/arm/dts/Makefile                        |    2 +
>>   arch/arm/dts/k3-j784s4-binman.dtsi           |  505 +
>>   arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi | 8757 +++++++++++++++++
>>   arch/arm/dts/k3-j784s4-ddr.dtsi              | 8858 ++++++++++++++++++
>>   arch/arm/dts/k3-j784s4-evm-u-boot.dtsi       |   25 +
>>   arch/arm/dts/k3-j784s4-r5-evm.dts            |  105 +
>>   6 files changed, 18252 insertions(+)
>>   create mode 100644 arch/arm/dts/k3-j784s4-binman.dtsi
>>   create mode 100644 arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi
>>   create mode 100644 arch/arm/dts/k3-j784s4-ddr.dtsi
>>   create mode 100644 arch/arm/dts/k3-j784s4-evm-u-boot.dtsi
>>   create mode 100644 arch/arm/dts/k3-j784s4-r5-evm.dts
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 85fd5b1157..21cfebff58 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -1327,6 +1327,8 @@ dtb-$(CONFIG_SOC_K3_J721S2) += k3-am68-sk-base-board.dtb\
>>   			       k3-am68-sk-r5-base-board.dtb\
>>   			       k3-j721s2-common-proc-board.dtb\
>>   			       k3-j721s2-r5-common-proc-board.dtb
>> +dtb-$(CONFIG_SOC_K3_J784S4) += k3-j784s4-evm.dtb\
>> +			       k3-j784s4-r5-evm.dtb
>>   dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \
>>   			      k3-am642-r5-evm.dtb \
>>   			      k3-am642-sk.dtb \
>> diff --git a/arch/arm/dts/k3-j784s4-binman.dtsi b/arch/arm/dts/k3-j784s4-binman.dtsi
>> new file mode 100644
>> index 0000000000..f9b191424c
>> --- /dev/null
>> +++ b/arch/arm/dts/k3-j784s4-binman.dtsi
>> @@ -0,0 +1,505 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
>> + */
> <snip>
>
>> +&binman {
>> +	ti-spl_unsigned {
>> +		filename = "tispl.bin_unsigned";
>> +		pad-byte = <0xff>;
>> +
>> +		fit {
>> +			description = "Configuration to load ATF and SPL";
>> +			#address-cells = <1>;
>> +
>> +			images {
>> +
>> +				atf {
>> +					description = "ARM Trusted Firmware";
>> +					type = "firmware";
>> +					arch = "arm64";
>> +					compression = "none";
>> +					os = "arm-trusted-firmware";
>> +					load = <CONFIG_K3_ATF_LOAD_ADDR>;
>> +					entry = <CONFIG_K3_ATF_LOAD_ADDR>;
>> +
>> +					atf-bl31 {
>> +						filename = "bl31.bin";
>> +					};
>> +				};
>> +
>> +				tee {
>> +					description = "OPTEE";
> The official spelling is "OP-TEE".
>
>> +					type = "tee";
>> +					arch = "arm64";
>> +					compression = "none";
>> +					os = "tee";
>> +					load = <0x9e800000>;
>> +					entry = <0x9e800000>;
>> +
>> +					tee-os {
>> +						filename = "tee-pager_v2.bin";
> Since OP-TEE 3.21.0 this could/should be replaced with tee-raw.bin. Although tee-pager_v2.bin is still produced unconditionally (even when the "pager" feature is disabled in OP-TEE) it might not be the case in the future, and the name is somewhat misleading when pager is disabled anyways (which is clearly the case here since tee-pageable_v2.bin is not used).
>
> Thanks,
Okay will fix it

-- 
Regards,
Apurva Nandan,
Texas Instruments.