[PATCH v3 0/8] Support USB for Meson A1

[Alexey Romanov]

Hello!

This patchset adds USB stack support for Amlogic A1 SoC's
series. Made reset / phy / dwc3 drivers more flexible and
added support for A1 board.

V2:

- Made power domain for PHY optional.
- Add missing CLKID_USB_PHY gate.
- Drop patch with USB stack initialization in board-a1.c.
Instead of, enable CONFIG_DM_USB_GADGET for AD401 board.
- Support A1 in g12a_child_pre_probe/post_remove functions
in dwc3 driver.

V3:

- Rebased over latests Amlogic U-Boot branch.

Alexey Romanov (7):
  dt-bindings: reset: add Meson A1 reset bindings
  reset: add support for Amlogic A1 family
  phy: get rid of raw hex values
  phy: move clk enable/disable in init/exit
  phy: support Amlogic A1 family
  dwc3: add support for Amlogic A1 family
  ad401: enable USB stack

Igor Prusov (1):
  a1: clk: Add missing USB_PHY_IN and USB_PHY gates

 configs/ad401_defconfig                       |   3 +
 drivers/clk/meson/a1.c                        |   6 +
 drivers/phy/Kconfig                           |   2 +-
 drivers/phy/meson-g12a-usb2.c                 | 235 ++++++++++++++++--
 drivers/reset/reset-meson.c                   |  42 +++-
 drivers/usb/dwc3/dwc3-meson-g12a.c            |  79 +++++-
 .../reset/amlogic,meson-a1-reset.h            |  76 ++++++
 7 files changed, 409 insertions(+), 34 deletions(-)
 create mode 100644 include/dt-bindings/reset/amlogic,meson-a1-reset.h

-- 
2.25.1